Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2024-2025 Driving Cruise control

Cruise control - SpecificrecommendationsThe cruise control function does notguarantee compliance with the maximumauthorised speed and the safety distancebetween vehicles, the driver remainsresponsible for their driving.In the interest of public safety, only use cruisecontrol if the traffic conditions enable vehiclesto drive at a steady speed and maintain anadequate safety distance.Remain vigilant while cruise control isactivated. If you press and hold one ofthe speed setting modification buttons, yourvehicle may change speed very abruptly.When descending a steep hill, the cruisecontrol system cannot prevent the vehiclefrom exceeding the set speed. Brake ifnecessary to control the vehicle speed.On steep climbs or when towing, the setspeed may not be reached or maintained.Exceeding the programmed speedsettingYou can temporarily exceed the speedsetting by pressing the accelerator pedal (theprogrammed speed flashes).To return to the speed setting, release theaccelerator pedal (when the set speed isreached again, the displayed speed stopsflashing).Operating limitsNever use the system in the followingsituations:– In an urban area with the risk of pedestrianscrossing the road.– In heavy traffic (except versions with theStop & Go function).– On winding or steep roads.– On slippery or flooded roads.– In poor weather conditions.– In the event of restricted visibility for thedriver.– Driving on a speed circuit.– Driving on a rolling road.– When using a ‘space-saver’ type sparewheel.– When using snow chains or non-slip covers.Cruise controlFor more information, refer to the Generalrecommendations on the use of drivingand manoeuvring aids and the Specificrecommendations on cruise control.This system automatically maintainsthe vehicle’s speed at the value pro-grammed by the driver (speed set-ting), without the use of the accelera-tor pedal.Cruise control is switched on manually.It requires a minimum vehicle speed of 25 mph(40 km/h).With an automatic gearbox, mode D or secondgear or higher in mode M must be engaged.With a drive selector, mode Dor B must beengaged.Cruise control remains active afterchanging gear, regardless of the gearboxtype, on engines fitted with the Stop & Startfunction.Switching off the ignition cancels anyspeed setting.Steering-mounted controls1.Cruise control selection2.Switch on/Pause cruise control at thepreviously saved speed setting3.Increase the speed setting (if cruise controlactivated) Activation of cruise control inprogress (if cruise control deactivated)4.Decrease the speed setting (if cruisecontrol activated) Activation of cruisecontrol in progress (if cruise controldeactivated)Driving134
5.Activation of cruise control in progress Usethe speed suggested by the Road signsrecognition functionFor more information on the Road signsrecognition function, refer to the correspondingsection.Information displayed onthe instrument panel6.Cruise control mode selection indication7.Cruise control on (green)/Pause (grey)indication8.Speed setting value9.Speed suggested by the Road signsrecognition function (depending on version)Switching on/Pausing►Press 1-ASSIST to select the cruise controlmode; the function is paused (grey).►Press 3, 4 or press 5-OK to activate thecruise control and save a speed settingas soon as the vehicle speed reaches thedesired level (green).►Pressing 2-II> temporarily pauses thefunction.►Pressing 2-II>, 3, 4 or 5-OK again willreactivate cruise control (green).Cruise control operation is also temporarilyinterrupted (pause):– by pressing the brake pedal.– automatically, if the electronic stabilitycontrol (ESC) system is triggered.– by shifting to neutral or engaging reversegear.– by using the electric parking brake.Modifying the speed settingThe cruise control must be active.To change the speed setting using the vehicle’scurrent speed:►For steps of +/- 1 mph (1 km/h), makesuccessive short presses on 3 to increase or4 to decrease.►For steps of +/- 5 mph (5 km/h), press andhold on 3 to increase or 4 to decrease.Prolonged pressing and holding on 3 or4 causes a very rapid change in vehiclespeed.As a precaution, we recommend settinga cruise speed fairly close to the currentspeed of your vehicle, to avoid any suddenacceleration or deceleration of the vehicle.When the function is activated, the speedsetting value can be changed using the speedsuggested by the Road signs recognitionfunction displayed on the instrument panel:– When passing the sign:►Press 5-OK to save the suggested speed.This value is then immediately shown as the newspeed setting on the instrument panel.– After passing the sign:►Press 5-OK. The message "OK?" isdisplayed to confirm the request to save.►Press 5-OK again to save the suggestedspeed. The new speed setting value isdisplayed on the instrument panel.Off►Press 1: the cruise control information displaydisappears.MalfunctionIn the event of a malfunction, dashes aredisplayed flashing and then fixed instead of thespeed setting.Have it checked by a PEUGEOT dealer or aqualified workshop.Drive Assist PlusThis system automatically adjusts the speedand corrects the trajectory of the vehicle, usingAdaptive cruise control with Stop&Go function inconjunction with Lane positioning assist.These two functions must be activated and inoperation.Driving1356
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131