Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Practical information Snow chains

181Practical information7transverse roof bars approved for your vehicle.Observe the instructions on fitting and use contained in the guide supplied with the roof bars.Maximum load distributed over the transverse roof bars, for a loading height not exceeding 40 cm (except bicycle carrier): 80kg.As this value may change, please verify the maximum load quoted in the guide supplied with the roof bars.If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars and the fixings on the vehicle.Be sure to refer to national legislation in order to comply with the regulations for transporting objects that are longer than the vehicle.Fitting on longitudinal barsThe transverse bars must be fixed at the markings located on the longitudinal bars.Direct fitting on roofThe transverse bars must only be fixed at the four anchorage points located on the roof frame. These points are concealed by the vehicle doors when the doors are closed.The roof bar fixings have a stud which must be inserted into the opening of each anchorage point.RecommendationsDistribute the load uniformly, taking care to avoid overloading one of the sides.Arrange the heaviest part of the load as close as possible to the roof.Secure the load firmly.Drive gently: the vehicle will be more susceptible to the effects of side winds and its stability may be affected.Regularly check the security and tight fastening of the roof bars, at least before each trip.Remove the roof bars once they are no longer needed.SunroofCheck that the load does not protrude below the roof bars, so that it does not impede movement of the sunroof - risk of major damage!Snow chainsIn wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.Snow chains must be fitted only to the front wheels. They must never be fitted to "space-saver" type spare wheels.Observe the legislation in force in your country relating to the use of snow chains and maximum authorised speeds.Use only chains designed to be fitted to the type of wheel fitted to the vehicle:Original tyre sizeMaximum link size215/65 R179 mm225/55 R189 mm205/55 R199 mm
182Practical informationOriginal tyre sizeMaximum link size235/50 R19Not suitable for chainsFor more information on snow chains, contact a PEUGEOT dealer or a qualified workshop.Installation tips ►To fit the snow chains during a journey, stop the vehicle on a flat surface at the side of the road.►Apply the parking brake and position any wheel chocks under the wheels to prevent movement of the vehicle.►Fit the snow chains following the instructions provided by the manufacturer.►Move off gently and drive for a few moments, without exceeding 31mph (50km/h).►Stop the vehicle and check that the snow chains are correctly tightened.It is strongly recommended that you practise fitting the snow chains on a level and dry surface before setting off.Avoid driving with snow chains on roads that have been cleared of snow to avoid damaging the vehicle's tyres and the road surface. If the vehicle is fitted with alloy wheels, check that no part of the chain or its fixings is in contact with the wheel rim.Rechargeable hybrid vehiclesThe use of snow chains is only authorised on the front wheels.The driving mode selector must be on the 4WD position (depending on version).Very cold climate screen(Depending on country of sale)This removable device prevents the accumulation of snow around the radiator cooling fan.It consists of two elements to be attached to the front bumper.In case of difficulty with installation/removalContact a PEUGEOT dealer or a qualified workshop.Before any operation, ensure that the engine is off and the cooling fan has stopped.It is essential to remove them when:–the outside temperature exceeds 10°C.–recovery is in progress.–the speed is above 75 mph (120km/h).Fitting►Hold the corresponding screen in front of the lower grille of the bumper.►First insert the upper and side fixing brackets into the bumper.►Tilt the screen downwards to engage the lower part of the screen into the bumper.►Check that the unit is firmly held by pressing around the edges.Repeat these operations for the other screen.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131