Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Lighting and visibility Static cornering lighting

78Lighting and visibilityWith the ring of the lighting control stalkin the "AUTO" position and the function activated on the touch screen, this system automatically switches between dipped and main beam headlamps, according to lighting and traffic conditions, using a camera located at the top of the windscreen.This system is a driving aid.The driver remains responsible for the vehicle's lighting, its correct use in the prevailing light, visibility and traffic conditions, and for compliance with driving and vehicle regulations.The system becomes operational when the vehicle exceeds 16 mph (25 km/h).When the speed falls below 9 mph (15 km/h), the function is no longer operational.Activation/DeactivationThe settings are changed via the Driving/Vehicle touch screen menu.The state of the system is stored when the ignition is switched off.OperationIf the ambient light level is very low and traffic conditions permit:–The main beam headlamps come on automatically. These indicator lamps light up on the instrument panel.If the ambient light level is sufficient and/or the traffic conditions do not allow the main beam headlamps to be lit:–The dipped beam headlamps remain lit. These indicator lamps light up on the instrument panel.The function is deactivated if the foglamps are switched on or if the system detects poor visibility conditions (e.g.fog, heavy rain, snowfall).When the foglamps are switched off or when the visibility conditions become favourable again, the function is automatically reactivated.This indicator lamp goes out when the function is deactivated.PauseIf the situation requires a change of headlamp beam, the driver can take over at any time.►Switch the headlamps manually between dipped and main beam to pause the function.If the "AUTO" and "Dipped beam" indicator lamps were on, the system changes to main beam.If the "AUTO" and "Main beam" indicatorlamps were on, the system changes to dipped beam.►To reactivate the function, once again switch the headlamps manually between dipped and main beam.Static cornering lightingWith the dipped or main beam headlamps on, this function allows headlamps to illuminate the inside of a bend using light-emitting diodes (LEDs).The speed of the vehicle must be less than 56 mph (90km/h).This function is only available with the "Full LED" technology headlamps.
79Lighting and visibility4Activation / DeactivationIt is set via the Driving/ Vehicle touch screen menu.Switching on / offThis system operates from a certain angle of rotation of the steering wheel.The system does not operate:–below a certain angle of rotation of the steering wheel.–above 56 mph (90km/h),–when reverse gear is engaged.Night VisionThis system identifies and signals the presence of pedestrians and animals in the driver's field of vision, in low exterior light conditions, using an infrared camera located at the front of the vehicle.Select the "Night vision" display mode if you want the infrared camera image to be displayed constantly on the instrument panel. When the conditions are met, an alert is triggered if there is a risk of collision.The permanentdisplay disappears upon switching off the ignition or if the conditions are not met.This system is a driving aid system that cannot, under any circumstances, replace the driver's assessment of night-time visibility and traffic conditions.In some cases, the differences in temperature are insufficient and the system may not detect all dangers or, conversely, it may give false warnings (e.g. engines of lorries parked by the side of the road).Activation/DeactivationThis function is set via the Driving/Vehicle touch screen menu.Conditions for operation–With the engine running and in Stop mode ofStop & Start.–Very low light conditions with dipped beam headlamps on and in good working order.–Temperature between -30°C and +28°C.–Speed below 99 mph (160km/h).–Detection of animals taller than 0.50 m.OperationIf the function is selected but the display on the instrument panel and the alerts are not available (in "Night Vision"mode), the indicator lamp comes on in grey.If all operating conditions are met, the indicator lamp comes on in green: the display on the instrument panel (with "Night Vision" mode selected) and the triggering of alerts are available.If certain operating conditions (speed or temperature) are not met, the indicator lamp comes on in orange: only the display on the instrument panel is available (in "Night Vision" mode).Whilst the exterior light is too bright or the dipped beam headlamps have not been switched on, the alerts are not available.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131