Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 In the event of a breakdown Warning triangle

195In the event of a breakdown8Warning triangleThis reflective and dismantlabledevice is to be installed on the side of the road when a vehicle is broken down or damaged.Before getting out of the vehicleTurn on the hazard warning lamps, then put on the safety vest to assemble and install the triangle.Storage compartmentThere is a compartment in the interior trim of the tailgate to store a warning triangle.►After opening the tailgate, release the cover by turning the screw a quarter turn to the left.Assembling and placing the triangleFor versions supplied with a triangle as original equipment, refer to the illustration above.For other versions, refer to the assembly instructions provided with the triangle.►Put the triangle in place behind the vehicle, as required by local legislation.Running out of fuel (Diesel)With Diesel engines, the fuel system must be primed if you run out of fuel.Before starting to prime the system, it is essential to put at least 5 litres of Diesel into the fuel tank.For more information on Refuelling and on Misfuel prevention (Diesel), refer to the corresponding section.1.5 BlueHDi engines►Switch on the ignition (without starting the engine).►Wait around 1minute and switch off the ignition.►Operate the starter motor to start the engine.If the engine does not start at the first attempt, do not keep trying, but restart the procedure.Tool kitSet of tools supplied with the vehicle.Its content depends on your vehicle's equipment:–Temporary puncture repair kit.–Spare wheel.Accessing the tools
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131