Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 In the event of a breakdown Towing the vehicle

213In the event of a breakdown8►Disconnect the (+) terminal by disconnecting the red quick-release clamp:•Raise leverA fully to release clampB.•Remove clampB by lifting it off.ReconnectionFront battery:►Connect the (+) terminal by connecting the red quick-release clamp:•Raise leverA fully.•Refit open clampB on the (+) terminal.•Push clampB fully down.•Lower leverA to lock clampB.Rear battery:►Connect the (-) terminal using the black quick-release connector.Following reconnectionAfter reconnecting the battery, turn on the ignition and wait 1minute before starting the engine, to enable the electronic systems to initialise.For right-hand drive versions, when the total distance recorder has reached 62miles (100km), you must wait approximately 15minutes before starting the engine.If minor problems nevertheless persist following this operation, contact a PEUGEOT dealer or a qualified workshop.Referring to the relevant section, reinitialise certain equipment:–Remote control key or electronic key (depending on version).–Sunroof and electric blind.–Electric windows.–Date and time.–Preset radio stations.After reconnecting the battery, the message "Collision risk detection system fault" is displayed on the instrument panel when the ignition is switched on. This operation is perfectly normal. The message will disappear while driving.Towing the vehicleProcedure for having your vehicle towed or for towing another vehicle using a removable mechanical device.
214In the event of a breakdownGeneral recommendationsObserve the legislation in force in the country where you are driving.Check that the towing vehicle is heavier than the towed vehicle.The driver must remain at the wheel of the towed vehicle and must have a valid driving licence.When towing a vehicle with all four wheels on the ground, always use an approved towbar; ropes and straps are prohibited.The towing vehicle must move off gently.When the vehicle is towed with its engine off, there is no longer braking and steering assistance.A professional recovery service must be called in the following cases:–broken down on a motorway or main road;–not possible to put the gearbox into neutral, unlock the steering, or release the parking brake;–not possible to tow a vehicle with an automatic gearbox, with the engine running;–towing with only two wheels on the ground;–four-wheel drive vehicle;–no approved towbar available.Rechargeable hybrid vehiclesBefore any intervention, with the ignition on, depress the brake pedal and select mode N, then switch off the hybrid system (READYindicator lamp off).Always call on professionals for recovery of the vehicle on a flatbed lorry or trailer.Use the towing eye onlyto free the vehicle if it is stuck, or to secure it for recovery on a flatbed lorry or trailer.Towing constraintsType of vehicle(engine/gearbox)Front wheels on the groundRear wheels on the groundFlatbed4 wheels on the ground with towbarInternal combustion/ManualInternal combustion/Automatic
215In the event of a breakdown8Towing constraintsType of vehicle(engine/gearbox)Front wheels on the groundRear wheels on the groundFlatbed4 wheels on the ground with towbarHybrid 2WDHybrid 4WD2WD: 2-wheel drive.4WD: 4-wheel drive.In case of battery or electric parking brake failure, it is essential to call a professional using flatbed recovery vehicles (excluding manual gearbox).Accessing the toolsDepending on version, the towing eye is stored either in the interior trim of the boot sill, left-hand side, or in a bag behind the left-hand rear seat.The towing eye is stored in a tool box, under the boot floor.For more information on accessing the Tool kit, refer to the corresponding section.Towing your vehicleTo access the front screw thread:
216In the event of a breakdown►Unclip the cover by pressing at its top left-hand corner.To be towed:►Screw the towing eye in fully.►Install the towbar.►Put the gearbox into neutral.Failure to observe this instruction could result in damage to certain components (braking, transmission, etc.) and to the absence of braking assistance the next time the engine is started.Automatic gearboxNever tow the vehicle with the driving wheels on the ground and the engine off.►Unlock the steering and release the parking brake.►Switch on the hazard warning lamps on both vehicles.►Move off gently, drive slowly and only for a short distance.Towing another vehicleTo access the rear screw thread:►Unclip the cover by pressing at its left-hand section.►Pull the cover downwards.To tow:►Screw the towing eye in fully.►Install the towbar.►Switch on the hazard warning lamps on both vehicles.►Move off gently, drive slowly and only for a short distance.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131