Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 In the event of a breakdown Tool kit

195In the event of a breakdown8Warning triangleThis reflective and dismantlabledevice is to be installed on the side of the road when a vehicle is broken down or damaged.Before getting out of the vehicleTurn on the hazard warning lamps, then put on the safety vest to assemble and install the triangle.Storage compartmentThere is a compartment in the interior trim of the tailgate to store a warning triangle.►After opening the tailgate, release the cover by turning the screw a quarter turn to the left.Assembling and placing the triangleFor versions supplied with a triangle as original equipment, refer to the illustration above.For other versions, refer to the assembly instructions provided with the triangle.►Put the triangle in place behind the vehicle, as required by local legislation.Running out of fuel (Diesel)With Diesel engines, the fuel system must be primed if you run out of fuel.Before starting to prime the system, it is essential to put at least 5 litres of Diesel into the fuel tank.For more information on Refuelling and on Misfuel prevention (Diesel), refer to the corresponding section.1.5 BlueHDi engines►Switch on the ignition (without starting the engine).►Wait around 1minute and switch off the ignition.►Operate the starter motor to start the engine.If the engine does not start at the first attempt, do not keep trying, but restart the procedure.Tool kitSet of tools supplied with the vehicle.Its content depends on your vehicle's equipment:–Temporary puncture repair kit.–Spare wheel.Accessing the tools
196In the event of a breakdownThe tool kit is stored in the boot, under the floor.To access it:Versions with 2-position boot floor:►Open the boot.►Place the adjustable boot floor in the high position.►Lift the boot floor past the two retractable stops.►Place the boot floor onto these two stops to hold it up.Versions with articulated boot mat (Rechargeable hybrid):►Open the boot.►Unfold the articulated boot mat by pulling its handle until it is fully opened.With temporary puncture repair kit►Unclip the two fixings to open its cover.With spare wheel►Unclip the storage box by pulling it upwards.►Unclip the two fixings to open its cover.Accessing the toolsSome of the tools are stored beneath the floor against the boot sill.The left-hand box contains the wheelbrace and its extension piece.The right-hand box contains the wheel chocks and the towing eye.To access it:►Open the boot.►Fold the concertina panels.►Install the third row seats.►Unclip the required tools from the boot sill trim.
197In the event of a breakdown8With temporary puncture repair kitModel without storage boxThis kit, stored in a bag, is installed behind the second row left-hand seat.►Fold the seat backrest onto the cushion to access the bag.Model with storage boxThis kit is installed in the storage box, located in front of the second row left-hand seat.►Open the storage box cover to access the kit.With spare wheelThe tool box is installed at the centre of the spare wheel beneath the vehicle.It contains the jack and the wheel bolt cover removal tool.►First, access the spare wheel.For further information on the Spare wheel, please refer to the corresponding section.►Press the tab to unlock the cover.►While keeping the tab pressed in, slide the cover to the middle and remove it.List of tools1.Chocks to immobilise the vehicle (depending on equipment)2.Socket for the wheel security bolts (located in the glove box) (depending on equipment)To adapt the wheelbrace to the special ‘security’ bolts.3.Removable towing eyeFor more information on Towing the vehicleand using the removable towing eye, refer to the corresponding section.With temporary puncture repair kitKit 1Kit 24.12V compressor with cartridge of sealant and speed limit stickerFor temporary repair of a tyre and to adjust the tyre pressure.
198In the event of a breakdownFor more information on the Temporary puncture repair kit, refer to the corresponding section.With spare wheel5.WheelbraceFor removing the wheel trim and the wheel bolts.6.Jack with integrated handleTo raise the vehicle.7.Wheel bolt cap removal tool (depending on equipment)For removing the wheel bolt head finishers on alloy wheels.8.Wheelbrace extensionFor loosening/tightening the spare wheel carrier winch cable nut.For more information on the Spare wheel, refer to the corresponding section.These tools are specific to the vehicle and may vary according to the level of equipment.Do not use them for any other purpose.The jack must only be used to change a wheel with a damaged or punctured tyre.Do not use any jack other than the one supplied with the vehicle.If the vehicle does not have its original jack, contact a PEUGEOT dealer or a qualified workshop to obtain the one that was intended by the manufacturer.The jack meets European standards, as defined in the Machinery Directive 2006/42/CE.The jack does not require any maintenance.Temporary puncture repair kitVisit this link to view explanatory videos: http://q-r.to/bagGl9Made up of a compressor and a sealant cartridge,it allows you to carry out a temporary repair of the tyre so that you can drive to the nearest garage.It is designed to repair most punctures located on the tyre tread.The vehicle's electric system allows the connection of the compressor to the 12 V power supply for long enough to repair a tyre after a puncture.Only the 12 V socket located at the frontof the vehicle can be used to power the compressor.For more information on the Tool kit, refer to the corresponding section.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131