Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 In the event of a breakdown Changing a bulb

206In the event of a breakdownDeactivate certain driving aid functions (Active Safety Brake, Adaptive cruise control, etc.).Do not exceed the maximum authorised speed of 50 mph (80km/h) or the maximum distance of 50 miles (80 km).Driving with more than one spare wheel of this type is prohibited.The wheel trim from the replaced wheel must not be refitted.Go to a PEUGEOT dealer or a qualified workshop.Have the tightening of the spare wheel's bolts and its tyre pressure checked.Have the punctured tyre examined. After inspection, the technician will advise you on whether the tyre can be repaired or if it must be replaced.Changing a bulbIn some weather conditions (e.g. low temperature or humidity), misting on the internal surface of the glass of the headlamps and rear lamps is normal, and will disappear after the lamps have been on for a few minutes.Never look too closely at the light beam of LED technology lamps - risk of serious eye injury!The headlamps have polycarbonate lenses with a protective coating:–Do not clean them with a dry or abrasive cloth, nor with detergent or solvent products.–Use a sponge and soapy water or a pH neutral product.–When using a high-pressure washer on persistent marks, do not keep the lance directed towards the headlamps, lamps or their edges for too long, so as not to damage their protective coating and seals.Changing a bulb must only be done with the ignition off and after the headlamp / lamp has been switched off for several minutes - risk of serious burns!Do not touch the bulb directly with your fingers; use a lint-free cloth.It is essential only to use anti-ultraviolet (UV) type bulbs, so as not to damage the headlamp.Always replace a failed bulb with a new bulb of the same type and specification. To avoid lighting imbalance, replace the bulbs in pairs.Refitting the lamp unitsPerform the operations in the reverse order to dismantling.Light-emitting diode (LED) headlamps and lampsDepending on version, the affected types of headlamps/lamps are:–LED technology headlamps.–Full LED technology headlamps.–Direction indicator side repeaters.–Side spotlamps.–Brake lamps.–LED technology rear lamps.–Third brake lamp.–Number plate lamps.If you need to replace this type of bulb, you must contact a PEUGEOT dealer or a qualified workshop.Do not touch the LED or Full LED technology headlamps - risk of electrocution!
207In the event of a breakdown8Front lampsModel with LEDtechnologyheadlamps1.Dipped beam headlamps/Main beam headlamps2.Daytime running lamps/Sidelamps /Direction indicatorsModel with Full LEDtechnologyheadlamps1.Dipped beam headlamps/Main beam headlamps2.Static cornering lamps3.Daytime running lamps/Sidelamps /Direction indicatorsRear lamps1.Daytime running lamps/Sidelamps/Brake lamps (LED)2.Daytime running lamps/Sidelamps (LED)3.Direction indicators (LED)4.Reversing lamps(LED)5.Foglamps (P21W)Foglamps (P21W)These bulbs are replaced from outside the rear bumper.►Pass your hand under the bumper.►Turn the bulb holder a quarter turn and remove it.►Turn the bulb a quarter turn and replace it.
208In the event of a breakdownWhen changing the bulb within a few minutes of switching off the ignition, take care not to touch the exhaust - risk of burns!FusesChanging a fuseAll work must be carried out only by a PEUGEOT dealer or a qualified workshopThe replacement of a fuse by a third party could cause a serious malfunction of the vehicle.Installing electrical accessoriesThe vehicle's electrical system is designed to operate with standard or optional equipment.Before fitting other electrical equipment or accessories to your vehicle, contact a PEUGEOT dealer or a qualified workshop.PEUGEOT accepts no responsibility for the cost incurred in repairing the vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied or not recommended by PEUGEOT and not installed in accordance with its recommendations, in particular when the combined power consumption of all of the additional equipment connected exceeds 10 milliamperes.12V battery/Accessory batteriesLead-acid starter batteriesThese batteries contain harmful substances (sulphuric acid and lead).They must be disposed of in accordance with regulations and must never under any circumstances be discarded with household waste.Dispose of used batteries at a designated collection point.Protect your eyes and face before handling the battery.All operations on the battery must be carried out in a well ventilated area and away from naked flames and sources of sparks, to avoid any risk of explosion or fire.Wash your hands afterwards.Electronic control units/LED technology headlampsNever connect the negative jump lead to the metal part of the electronic control unitsor at the back of the headlamps.Risk of destroying the electronic control unitsand/or headlamps!Connect to the remote earth point provided for this purpose.Frozen batteryNever try to charge a frozen battery - risk of explosion!If the battery has frozen, have it checked by a PEUGEOT dealer or by a qualified workshop, who will verify that the internal components have not been damaged and that the case has not cracked, which could lead to a risk of leakage of toxic and corrosive acid.Automatic gearboxNever try to start the engine by pushing the vehicle.SymbolsNo sparks or naked flames, no smoking. Always protect your eyes. Explosive gases can cause blindness and injury.Keep the vehicle's battery out of the reach of children.The vehicle's battery contains sulphuric acid which can make you go blind or cause severe burns.For more information, refer to the handbook.Explosive gases can be present close to the battery.With petrol/Diesel enginesProcedure for starting the engine using another battery or for charging a discharged battery.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131