Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Ease of use and comfort Third row seats

53Ease of use and comfort3If this system fails (paddle D), the third row passengers can also get out after having folded the backrest of the second row seats using strap C.Do not let children operate the seats unsupervised.Third row seatsThe two third row seats are stored in a retracted position in the bottom of the boot. Each one is covered with rigid concertina panels, secured to the vehicle.Do not let children operate the seats unsupervised.Each concertina panel can support a maximum load of 100kg with the third row seats folded away.With the third row seats removed and the removable concertina panels supports installed, the maximum load is limited to 50kg.When there is a seat at the back of the boot, the removable support is fixed against the front wall of its housing.If the seat is removed from the back of the boot for extra storage space, the removable support must be installed on the two lugs on the central wall.Folding the concertina panels►Pull one of the straps; the 3 sections of the corresponding panel fold into concertina form.When the 3rd row seats are straightened, these folded concertina panels can be left upright or flat behind the seats (freeing up the seat well as a storage space).Positioning the seatsThese operations are carried out from the boot sill.►Remove the load space cover roller.►Straighten the continuity panels of the 2nd row seats.►Fold back the concertina panel and straighten it vertically.►Pull the black strap E, located behind the backrest.The backrest tilts backwards bringing the seat cushion with it; the seat locks in the open position.
54Ease of use and comfortThe load space cover roller can be stored behind the backrests of the 3rd row seats.For more information on the Boot fittings, and in particular the load space cover roller, refer to the corresponding section.Storing the seats►Straighten the continuity panels of the 2nd row seats.►Place the head restraints in the low position.►Check that the seat belts in the 3rd row are properly stored along the side trims without being folded or twisted.►Pull red strap F, located at the bottom of the backrest.The seat is unlocked.►Push the backrest slightly forwards.The backrest tilts and folds onto the cushion; the folded seat is stored at the back of its storage area.►Reposition the concertina panels above the retracted seats.Before doing anything to the 3rd row seats, straighten the continuity panels of the 2nd row seats.Do not try to fold back a seat in the 3rd row without having opened it until the backrest is fully locked.Do not leave anything on or underneath the cushions of the 3rd row seats when they are being folded.Do not guide strap F when storing the seat - your fingers may get trapped!Removing the seatsRemoving the right-hand seat first is recommended in order to facilitate access to the left-hand seat unlocking control.The seat must be in the folded-away position.These operations must be performed from the boot sill.►Fold back the concertina panel.►Lift the yellow lever G, located on the right-hand side, as far upwards as possible to unlock the seat.►While keeping the yellow lever held up as far as possible, raise the rear part of the seat using the red strap F.
55Ease of use and comfort3►Once the rear part of the seat has been raised, take hold of each side of the seat cushion, at the plastic covers, then bring the seat towards you, keeping it at the same angle.Repositioning the seatsThese operations must be performed from the boot sill.As long as the seat is not in the correct position, it must be held with both hands by the sides, keeping it folded.►Check in advance that the seat storage well is empty and that the removable support is properly secured against the front wall.►While holding it by the sides at the plastic covers, tilt the seat forwards.►Simultaneously place both hooks located at the front of the seat onto the coloured securing lugs on the right and left at the bottom of the seat well.Check that the front hooks of the seat are positioned correctly on the two lugs.If they are not, you must remove the seat and start the procedure again.►Release the rear part of the seat which will lock in place under its own weight.The yellow lever G folds back automatically.If the seat is not perfectly horizontal, do not press on the backrest and do not try to unfold it - risk of damaging the mechanism!Take out the seat and start the operation again.Seat modularityConfiguration examples7 seats5 seatsTransport of objects6 seats4 seatsBy folding the second row seats and retracting the third row seats, you obtain
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131