Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Ease of use and comfort Seat modularity

55Ease of use and comfort3►Once the rear part of the seat has been raised, take hold of each side of the seat cushion, at the plastic covers, then bring the seat towards you, keeping it at the same angle.Repositioning the seatsThese operations must be performed from the boot sill.As long as the seat is not in the correct position, it must be held with both hands by the sides, keeping it folded.►Check in advance that the seat storage well is empty and that the removable support is properly secured against the front wall.►While holding it by the sides at the plastic covers, tilt the seat forwards.►Simultaneously place both hooks located at the front of the seat onto the coloured securing lugs on the right and left at the bottom of the seat well.Check that the front hooks of the seat are positioned correctly on the two lugs.If they are not, you must remove the seat and start the procedure again.►Release the rear part of the seat which will lock in place under its own weight.The yellow lever G folds back automatically.If the seat is not perfectly horizontal, do not press on the backrest and do not try to unfold it - risk of damaging the mechanism!Take out the seat and start the operation again.Seat modularityConfiguration examples7 seats5 seatsTransport of objects6 seats4 seatsBy folding the second row seats and retracting the third row seats, you obtain
56Ease of use and comforta continuous storage floor through to the back of the front seats.By placing the front passenger seat in the table position, you obtain a continuous storage floor through to the dashboard.Operations on the seats must only be done when the vehicle is stationary.Heating and VentilationAir intakeThe air circulating in the passenger compartment is filtered and originates either from the exterior, via the grille located at the base of the windscreen, or from the inside in air recirculation mode.ControlsDepending on version, the controls are accessible in the Climate touch screen menu or are grouped together on the centre console panel.Air distribution1.Windscreen demisting/de-icing vents2.Front side window demisting/de-icing vents3.Adjustable and closable side air vents4.Adjustable and closable central air vents5.Air outlets to the front footwells6.Air outlets to the rear footwells7.Adjustable and closable air vents, with blower (depending on version)AdviceUsing the ventilation and air conditioning system►To ensure that air is distributed evenly, keep the external air intake grilles at the base of the windscreen, the nozzles, the vents, the air outlets and the air extractor in the boot free from obstructions.►Do not cover the sunshine sensor located on the dashboard; this sensor is used to regulate the automatic air conditioning system.►Operate the air conditioning system for at least 5 to 10 minutes once or twice a month to keep it in good working order.►If the system does not produce cold air, switch it off and contact a PEUGEOT dealer or a qualified workshop.When towing a large load on a steep gradient in high temperatures, switching off the air conditioning increases the available engine power, enhancing the towing capacity.Avoid driving for too long with the ventilation off or with prolonged operation of interior air recirculation. Risk of misting and deterioration of the air quality!If the interior temperature is very high after the vehicle has stood for a long time in the sunshine, air the passenger compartment for a few moments.Put the air flow control at a setting high enough to quickly change the air in the passenger compartment.Condensation created by the air conditioning results in a discharge of water underneath the vehicle. This is perfectly normal.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131