Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Ease of use and comfort Rear bench seat

49Ease of use and comfort3The rear head restraints can be removed.Removing a head restraint►Pull the head restraint fully up.►Press the lugs A to release the head restraint and remove it completely.►Store the head restraint.Refitting a head restraint►Insert the head restraint rods into the guides in the corresponding seat backrest.►Push the head restraint down as far as it will go.►Press the lugs A to release the head restraint and push it down.Never drive with passengers seated at the rear when the head restraints are removed; the head restraints should be in place and in the high position.The head restraint for the central seat and those for the side seats are not interchangeable.Rear bench seatBench seat with fixed cushions and split folding backrests (2/3-1/3) to adapt the boot load space.Folding the backrestsEach section of the backrest has two release controls:–A grip 1 on the outer edge of the backrest.–A lever 2 on the boot side trim (depending on version).The backrests should only be manoeuvred when the vehicle is stationary.First steps:►Lower the head restraints.►Lift up the rear armrest.►If necessary, move the front seats forward.►Check that no person or object might interfere with the folding of the backrests (e.g.clothing, luggage).►Check that the outer seat belts are lying flat on the backrests.►Check that the centre seat belt buckle is stored in its housing. The folding of the backrest is accompanied by a slight lowering of the corresponding cushion.To obtain a flat surface, it is necessary to place the adjustable boot floor in the high position.When the backrest is released, the red indicator in the release grip is visible.Folding from the passenger compartment►Press the backrest release grip1.►Guide the backrest 3 down to the horizontal position.
50Ease of use and comfortFolding from the boot►Pull the backrest releaselever 2 towards you.The backrest 3 folds fully onto the cushion.Repositioning the backrestsFirst check that the outer seat belts are lying vertically flat alongside the backrest latching rings.►Put the backrest 3 in the upright position and push it firmly to latch it home.►Check that the red indicator is no longer visible in the release grip 1.►Ensure that the outer seat belts were not trapped during the operation.Please note: an incorrectly latched backrest compromises the safety of passengers in the event of sudden braking or an accident.The contents of the boot may be thrown forward - risk of serious injury!Second row seatsSeat adjustmentThe three second row seats are independent and of the same width. Their backrests can be folded to adapt the boot load space.A.Longitudinal adjustmentB.Seat backrest angle adjustment and foldingC.Folding the backrest from behind and emergency exit for third row passengersD.Access to third row seats
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131