Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Ease of use and comfort Front seats

43Ease of use and comfort3When drivingMaintain a good driving position and hold the steering wheel with both hands at the 'quarter to three' position, so that you can easily and quickly reach the controls behind and near the steering wheel.Never adjust the seats or steering wheel when driving.Always keep your feet on the floor.Front seatsBefore moving the seat backwards, ensure that there is no person or object that might prevent the full travel of the seat.There is a risk of trapping or pinching passengers if present in the rear seats or of jamming the seat if large objects are placed on the floor behind the seat.Manually-adjusted seats1.Longitudinal adjustment of the seat position►Raise the control bar and slide the seat forwards or backwards.►Release the bar to lock the seat in position in one of the notches.2.Seat cushion height adjustment►Raise or lower the control as many times as needed to obtain the desired height.3.Seat backrest angle adjustment►Turn the knob forwards or backwards to recline the backrest to the desired angle.or►For a passenger seat that can be placed in the table position, pull the handle and guide the backrest forwards or backwards.4.Head restraint height adjustmentRefer to the corresponding section.5.Lumbar support adjustment(only on the driver's seat)►Turn the knob forwards or backwards to increase or decrease the level of lumbar support.‘AGR’ certified seatsAdditional adjustments1.Seat cushion length adjustment►Pull the handle forwards to release the cushion, then move the front part of the seat cushion forwards or backwards.2.Seat cushion angle electric adjustment►Press and hold the front or rear of the button to raise or lower the front part of the seat cushion.
44Ease of use and comfort3.Lumbar support electric adjustmentThe control allows independent adjustment of the depth and vertical position of the lumbar support.►Press and hold the front or rear of the control to increase or reduce the lumbar support.►Press and hold the top or bottom of the control to raise or lower the lumbar support area.Placing the passenger seat in the table positionThe backrest of the passenger seat can be fully folded forwards and secured in this position.This function, when associated with folding of the backrest of the rear seats, helps with transporting long and bulky objects.First steps:►Lower the head restraint.►Fold up the “aircraft” type table (depending on version).►Move the seat backwards to allow space for the head restraint.►Adjust the seat to the lowest position.►Check that there is nothing that might interfere with folding of the backrest (seat belt, child seat, items of clothing, bags, etc.).Deactivation of the front passenger airbag is recommended.Folding the backrest►Pull the control fully upwards to release the backrest.►Tip the backrest fully forwards.In this position, the backrest can support a maximum load of 30kg.When sharp deceleration occurs, objects placed on the folded backrest can turn into projectiles.Returning the backrest into position►Pull the control fully upwards to release the backrest.►Raise the backrest and guide it backwards until it latches into place.►Check that the backrest is correctly latched into place.Front head restraintsAdjusting the heightUpwards:►Pull the head restraint up to the desired position; you can feel the head restraint clicking into position.Downwards:►Press lug A to lower the head restraint.The head restraint is correctly adjusted when its upper edge is level with the top of the head.Removing a head restraint►Pull the head restraint fully up.►Press lug A to release the head restraint and raise it fully.►Stow the head restraint securely.
45Ease of use and comfort3Refitting a head restraint►Insert the head restraint rods into the guides in the corresponding seat backrest.►Push the head restraint fully down.►Press the lug A to release the head restraint and push it down.►Adjust the height of the head restraint.Never drive with the head restraints removed; they should be in place and adjusted for the occupant of the seat.Electrically-adjusted driver's seatTo carry out these electric adjustments, switch on the ignition or start the engine if the vehicle has gone into energy economy mode.These electric adjustments are accessible about 1 minute after opening the driver's door. They are deactivated about 1 minute after switching the ignition off.1.Seat cushion height and angle adjustment/Longitudinal adjustment of the seat position►Raise or lower the front of the control to obtain the desired seat cushion angle.►Raise or lower the rear of the control to raise or lower the seat cushion.►Slide the control forwards or backwards to move the seat forwards or backwards.2.Seat backrest angle adjustment►Turn the control forwards or backwards to recline the backrest to the desired angle.3.Head restraint height adjustmentRefer to the corresponding section.4.Seat cushion length adjustment►Pull the handle forwards to release the cushion, then move the front part of the seat cushion forwards or backwards.5.Lumbar support adjustmentThe control allows independent adjustment of the depth and vertical position of the lumbar support.►Press and hold the front or rear of the control to increase or reduce the lumbar support.►Press and hold the top or bottom of the control to raise or lower the lumbar support area.Memorising driving positionsAssociated with the electrically-adjusted driver’s seat, this function allows two driving positions to be memorised, to make these adjustments easier if there are frequent driver changes.It records the electric adjustments made to the seat and door mirrors.Using buttons M/1/2
46Ease of use and comfort►Enter the vehicle and switch the ignition on.►Adjust your seat and the door mirrors.►Press button M, then press button 1 or 2within 4 seconds.An audible signal confirms the memorisation.Memorising a new position cancels the previous position.Recalling a stored positionWhile the seat is moving, take care that no person or object hinders the automatic movement of the seat.With the ignition on or engine running►Press button 1 or 2 to recall the corresponding position.An audible signal sounds when adjustment is complete.You can interrupt the current movement by pressing button M, 1 or 2 or by using one of the seat adjustment controls.A stored position cannot be recalled while driving.The recalling of stored positions is deactivated 45 seconds after switching off the ignition.Heated seatsThe function is active only with the engine running and when the outside temperature is below 20°C.►Press the button corresponding to the seat.►Each press changes the heating level; the corresponding number of indicator lamps come on.►To switch off the heating, press the button until all of the indicator lamps are off.The system status is memorised when the ignition is switched off.Do not use the function when the seat is not occupied.Reduce the heating intensity as soon as possible.When the seat and passenger compartment have reached a satisfactory temperature, switch the function off; reducing electrical consumption in turn decreases energy consumption.Prolonged use of heated seats is not recommended for people with sensitive skin.There is a risk of burns for people whose perception of heat is impaired (e.g.illness, taking medication).To keep the heated pad intact and to prevent a short circuit:–Do not place heavy or sharp objects on the seat.–Do not kneel or stand on the seat.–Do not spill liquids onto the seat.–Never use the heating function if the seat is damp.Multipoint massageSystem with a choice of type of massage and adjustment of its intensity.This system operates with the engine running, as well as in STOP mode of theStop & Start.The massage settings are adjusted via the touch screen.From the front seat:►Press this button; its green indicator lamp comes on.The settings page is displayed on the touch screen with the last memorised settings.If the settings suit you and you make no changes, the display returns to its previous state, and the function activates immediately.Seats must be adjusted one after another, starting with the driver's seat.
47Ease of use and comfort3To modify the settings:►Begin with the driver’s seat.►Select a massage intensity from the three levels offered: "1" (Low), "2" (Normal) or "3" (High).►Select another type of massage from those offered.►Wait for the driver's seat settings page to disappear.►Next, proceed with the passenger's seat in the same way.The changes are applied immediately.Once activated, the system starts a one hour massage cycle, made up of sequences of 6 minutes of massage followed by 3 minutes at rest.The system automatically stops at the end of the cycle; the indicator lamp for the button goes off.Steering wheel adjustment►When stationary, pull the control to release the steering wheel.►Adjust the height and reach to suit your driving position.►Push the control to lock the steering wheel.For safety reasons, these adjustments must only be carried out with the vehicle stationary.MirrorsDoor mirrorsAdjustment►Move control A to the right or to the left to select the corresponding mirror.►Move control B in any of the four directions to adjust.►Return control A to its central position.As a safety measure, the mirrors should be adjusted to reduce the "blind spots".The objects that you see in the mirrors are in fact closer than they appear. Take this into account in order to correctly judge the distance of vehicles approaching from behind.Manual foldingThe mirrors can be folded manually (parking obstruction, narrow garage, etc.).►Turn the mirror towards the vehicle.Electric foldingDepending on equipment, the door mirrors can be folded electrically.►From the inside, with the ignition on, place control A in the central position.►Pull control A backwards.►Lock the vehicle from the outside.If the mirrors are folded using control A, they will not unfold when the vehicle is unlocked.Electric unfolding►From outside: unlock the vehicle.►From inside: with the ignition on, place control A in the central position and then pull it rearwards.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131