Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Driving Speed limiter

135Driving6Extended Traffic Sign RecognitionFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This additional system recognises these road signs and displays them on the instrument panel.As you approach it, the symbol of the corresponding sign is displayed on the instrument panel.The actual road signs always take priority over those displayed by the system.The signs must comply with the Vienna Convention on road signs.Activation/DeactivationThe settings are changed via theDriving/Vehicletouch screen menu.Speed limiterFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system prevents the vehicle from exceeding the speed programmed by the driver (speed setting).The speed limiter is switched on manually.The minimum speed setting is 19 mph (30km/h).The speed setting remains in the system memory when the ignition is switched off.Steering-mounted control1.ON (LIMIT position)/OFF2.Reduce the speed setting3.Increase the speed setting4.Pause/resume speed limiter with the speed setting previously stored5.Depending on version:Display the speed thresholds saved using the Memorising speeds functionorUse the speed suggested by the Road signs recognition (MEM display)For more information on Memorising speedsor the Road signs recognition, refer to the corresponding sections.Information displayed on the instrument panel6.Speed limiter on/pause status indication7.Speed limiter mode selection indication8.Speed setting value9.Speed suggested by the Road signs recognition function (depending on version)
136DrivingSwitching on/Pausing►Turn thumbwheel1 to the "LIMIT" position to select speed limiter mode; the function is paused.►If the limit speed setting is suitable (most recent speed setting programmed in the system), press button4to switch the speed limiter on.►Pressing button 4again temporarily pauses the function.When the speed setting remains below the vehicle's speed for a prolonged period of time, an audible warning is emitted.Adjusting the limit speed settingYou do not have to switch the speed limiter on in order to set the speed.To modify the limit speed setting based on the vehicle’s current speed:►Briefly press button2 or 3 to change the value in steps of +or -1mph (1.6 km/h).►Press and hold button2 or 3 to change the value in steps of +or -5mph (8 km/h).To change the limit speed setting using memorised speeds, via the touch screen:►Press button5 to display the memorised speed settings.►Press the touch screen button for the desired speed setting.The selection screen closes after a few moments.This setting becomes the new limit speed.To modify the cruise speed setting based on the speed suggested by the Road signs recognition, as shown on the instrument panel:►Press button5 once; a message is displayed to confirm the memorisation request.►Press button5 again to save the suggested speed.The speed is immediately shown on the instrument panel as the new speed setting.Temporarily exceeding the speed setting►Fully depress the accelerator pedal.The speed limiter is temporarily deactivated and the displayed speed setting flashes.►Release the accelerator pedal to return to below the speed setting.When exceeding the speed is not due to the driver's action (e.g.in case of a steep slope), an audible signal is triggered immediately.On a steep descent or in the event of sharp acceleration, the speed limiter will not be able to prevent the vehicle from exceeding the speed setting.If necessary, apply the brakes to control your vehicle’s speed.When the vehicle speed returns to the speed setting level, the speed limiter operates again: the speed setting display becomes fixed again.Switching off►Turn the thumbwheel1 to the "OFF" position: speed limiter information is no longer displayed.MalfunctionIn the event of a malfunction, dashes are displayed flashing and then fixed instead of the speed setting.
137Driving6Have it checked by a PEUGEOT dealer or a qualified workshop.Cruise control - Specific recommendationsThe cruise control function does not guarantee compliance with the maximum authorised speed and the safety distance between vehicles, the driver remains responsible for their driving.In the interest of public safety, only use cruise control if the traffic conditions enable vehicles to drive at a steady speed and maintain an adequate safety distance.Remain vigilant while cruise control is activated. If you press and hold one of the speed setting modification buttons, your vehicle may change speed very abruptly.When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the set speed. Brake if necessary to control the vehicle speed.On steep climbs or when towing, the set speed may not be reached or maintained.Exceeding the programmed speed settingYou can temporarily exceed the speed setting by pressing the accelerator pedal (the programmed speed flashes).To return to the speed setting, release the accelerator pedal (when the set speed is reached again, the displayed speed stops flashing).Operating limitsNever use the system in the following situations:–In an urban area with the risk of pedestrians crossing the road.–In heavy traffic (except versions with the Stop & Go function).–On winding or steep roads.–On slippery or flooded roads.–In poor weather conditions.–In the event of restricted visibility for the driver.–Driving on a speed circuit.–Driving on a rolling road.–When using a ‘space-saver’ type spare wheel.–When using snow chains, non-slip covers or studded tyres.Cruise controlFor more information, refer to the General recommendations on the use of driving and manoeuvring aids and the Cruise control - particular recommendations.This system automatically maintains the vehicle’s speed at the value programmed by the driver (speed setting), without the use of the accelerator pedal.Cruise control is switched on manually.It requires a minimum vehicle speed of 25 mph (40km/h).With a manual gearbox, third gear or higher must be engaged.With an automatic gearbox, modeD or second gear or higher in modeM must be engaged.Cruise control remains active after changing gear on engines fitted with a manual gearbox and Stop & Start.Switching off the ignition cancels any speed setting.Steering-mounted control1.ON (CRUISE position)/OFF
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131