Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Driving Park Assist

161Driving6Park AssistFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system provides active parking assistance: it detects a parking space then operates the steering system to park in this space.With a manual gearbox, the driver manages the accelerator, brakes, gears and clutch.With an automatic gearbox (EAT6/EAT8), the driver manages the accelerator, brakes and gears.During phases of entry into and exit from a parking space, the system provides visual and audible information to the driver in order to make the manoeuvres safe. Several forward and reverse manoeuvres may be required.At any time, the driver can take back control by holding the steering wheel.The Park Assist system provides assistance for the following manoeuvres:A.Entry into a "parallel" parking spaceB.Exit from a "parallel" parking spaceC.Entry into a "bay" parking spaceThe Park Assist system cannot operate with the engine switched off.When Park Assist is activated, it prevents Stop & Start from going into STOP mode. In STOP mode, activation of Park Assist restarts the engine.The Park Assist system takes control of the steering for a maximum of 4 manoeuvring cycles. It is deactivated after these 4 cycles. If the vehicle is not positioned correctly, take back control to complete the manoeuvre.The sequence of manoeuvres and the driving instructions are displayed in the instrument panel.The assistance is activated: the display of this symbol and a speed limit indicate that the steering manoeuvres are controlled by the system: do not touch the steering wheel.The assistance is deactivated: the display of this symbol indicates that the steering manoeuvres are no longer controlled by the system: take over the steering.Activation of Park Assist deactivates the Blind spot monitoring.The Parking sensors function is not available during parking space measurement. It intervenes later when manoeuvring to warn that the vehicle is approaching an obstacle: the audible signal becomes continuous when the obstacle is less than 30 centimetres away.If the Parking sensors function has been deactivated, it will be automatically reactivated during the assisted manoeuvring phases.During parking and exit from parking manoeuvres, the Visiopark 1 - Visiopark 2 functions may come into operation. They allow better monitoring of the surroundings of the vehicle, by displaying additional information in the touch screen.For more information on the Visiopark 1 - Visiopark 2functions, refer to the corresponding section.In some circumstances, the sensors may not detect small obstacles located in their blind spots.Any object exceeding the size of the vehicle (e.g.roof ladder, towball) is not taken into account by the Park Assist during a manoeuvre.
162DrivingAlways check the surroundings of the vehicle before starting a manoeuvre.If the lateral distance between the vehicle and the space is too great, the system may not be able to measure the space.During manoeuvring phases, the steering wheel performs rapid turns: do not hold the steering wheel or put your hands between the spokes of the steering wheel.Beware of any object likely to block the manoeuvre (e.g.loose clothing, scarves, ties) - risk of injury!Assistance with "parallel" parking manoeuvresWhen parking, select "Park Assist" in the Driving/Vehicle touch screen menu to activate the function.Limit the vehicle speed to a maximum of 12 mph (20 km/h) and select "Enter parallel parking space" on the touch screen.To enter a "parallel" parking space, the system does not identify spaces that are clearly smaller or larger than the vehicle.Operate the direction indicator on the side you have chosen to park in order to activate the measurement function. The vehicle must drive at a distance of between 0.5m and 1.5m from the row of parked vehicles.20Drive at a speed below 12 mph (20 km/h) following the instructions until the system finds an available space.Move forwards slowly until a message is displayed, accompanied by an audible signal, asking you to engage reverse gear.Engage reverse gear, release the steering wheel and move without exceeding a speed of 4 mph (7 km/h).The assisted parking manoeuvre is in progress.7Without exceeding 5 mph (7km/h), move forwards and backwards, aided by the warnings from the "Parking sensors" system, until the end of the manoeuvre is indicated.The end of the manoeuvre is confirmed by a message and an audible signal.Parking assistance is deactivated: you can take over the controls again.Assistance with "bay" parking manoeuvresWhen parking, select “Park Assist” in the Driving/Vehicle touch screen menu to activate the function.Limit the vehicle speed to a maximum of 12 mph (20 km/h) and select “Enter bay parking space” on the touch screen.Operate the direction indicator on the parking side chosen to activate the measurement function. The vehicle should drive at a distance of between 0.5m and 1.5m from the row of parked vehicles.20Drive at a speed below 12 mph (20 km/h) following the instructions until the system finds an available space.When several successive spaces are found, the vehicle will be directed towards the last one.Move forwards slowly until a message is displayed, accompanied by an audible signal, asking you to engage reverse gear.Engage reverse gear, release the steering wheel and move without exceeding the speed of 5 mph (7 km/h).The assisted parking manoeuvre is in progress.7Without exceeding 5 mph (7km/h), follow the instructions and the warnings from the "Parking sensors" system, until the end of the manoeuvre is indicated.The end of the manoeuvre is confirmed by a message and an audible signal.The system is deactivated: it is possible to retake control.During a "bay" parking manoeuvre, the Park Assist system is automatically deactivated once the rear of the vehicle is within 50cm of an obstacle.
163Driving6Assistance with "parallel" parking exit manoeuvresTo leave a "parallel" parking space, switch the engine on.With the vehicle stationary, select "Park Assist" in the Driving/Vehicletouch screen menu to activate the function.Press "Exit parking slot" on the touch screen.Operate the direction indicator for the exit side chosen.Engage reverse or forward gear and release the steering wheel.The assisted parking manoeuvre is in progress.5Without exceeding 3 mph (5km/h), move forwards and backwards, aided by the warnings from the "Parking sensors" system, until the end of the manoeuvre is indicated.The manoeuvre is complete when the vehicle's front wheels are clear of the parking space.The end of the manoeuvre is confirmed by a message and an audible signal.The system is deactivated: it is possible to retake control.DeactivationThe system is deactivated via the Driving/ Vehicle touch screen menu.The system is automatically deactivated:when the ignition is switched off.if the engine stalls.if the driver's seat belt is not fastened.on opening the driver's door.if no manoeuvre is performed within 5 minutes of selecting the type of manoeuvre.after a prolonged stop of the vehicle during a manoeuvre.if the wheel anti-slip regulation (ASR) is triggered.if the speed of the vehicle is above 43 mph (70 km/h).when the driver interrupts the rotation of the steering wheel.after 4 manoeuvring cycles.if one of the front wheels encounters an obstacle.when towing a trailer, connected electrically.Deactivation is confirmed by a message and an audible signal.The driver should then take back control of the vehicle's steering.If the system is deactivated during a manoeuvre, the driver should reactivate it to repeat the measurement.To switch the system off for a prolonged period, contact a PEUGEOT dealer or a qualified workshop.MalfunctionsIf the parking sensor malfunction occurs during use, indicated by this warning lamp coming on, it causes the function to deactivate.In the event of a malfunction, have the system checked by a PEUGEOT dealer or a qualified workshop.In the event of a power steering malfunction, this warning lamp is displayed on the instrument panel, accompanied by a warning message.You must stop as soon as it is safe to do so. Contact a PEUGEOT dealer or a qualified workshop.
Peugeot & TotalEnergies,a partnership in performance !For more than 25 years of partnership, TotalEnergies and Peugeot have pushed the limits of performance in sports competition with historic victories, in endurance races or in rallies. Today, the two brands continue their common motorsport adventure by setting out to conquer the 24h of Le Mans and the FIA World Endurance Championship in the Hybrid Hypercar category. So many challenges for which Peugeot exclusively recommends high-tech Quartz lubricants for the protection of its engines throughout their life. TotalEnergies therefore equips Peugeot vehicles with Quartz lubricants from their fi rst fi lling in the factory to the approved maintenance networks to guarantee them optimal day-to-day operation. Peugeot & TotalEnergies: offi cial partners in performance !Keep your engine younger for longer !Quartz Ineo Xtra First 0W-20 is a very high performance lubricant resulting from the joint work of the Peugeot and TotalEnergies R&D teams. Its innovative technology extends your engine’s life while reaching signifi cant fuel savings and thus limiting CO2 emissions. The product is now available in new packaging* made of 50% recycled material and 100% recyclable.* 1L & 5L produced in Europe
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131