Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Driving Memorising speeds

131Driving6snow or dead leaves on the road or in the event of damaged bumpers and mirrors.When reverse gear is engaged, an audible signal (long beep) indicates that the sensors may be dirty.A front or rear impact to the vehicle can upset the sensors’ settings, which is not always detected by the system: distance measurements may be distorted.The sensors do not systematically detect obstacles that are too low (pavements, studs) or too thin (trees, posts, wire fences).Certain obstacles located in the sensors’ blind spots may not be detected or may no longer be detected during the manoeuvre.Certain materials (fabrics) absorb sound waves: pedestrians may not be detected.MaintenanceClean the bumpers and door mirrors and the field of vision of the cameras regularly.When washing your vehicle at high pressure, direct the spray from at least 30cm away from the radar, sensors and cameras.Mats/Pedal trimsThe use of mats or pedal trims not approved by PEUGEOT may interfere with the operation of the speed limiter or cruise control.To avoid any risk of jamming the pedals:–Ensure that the mat is secured correctly.–Never fit one mat on top of another.Units of speedEnsure that the units of speed displayed on the instrument panel (mph or km/h) are those for the country you are driving in.If this is not the case, when the vehicle is stationary, set the display to the required units of speed so that it complies with what is authorised locally.In case of doubt, contact a PEUGEOT dealer or a qualified workshop.Memorising speedsThis function, used only for the speed limiter and programmable cruise control, lets you save speed settings that will subsequently be proposed for the purpose of configuring these two systems.You can memorise multiple speed settings for each of the two systems.By default, some speed settings are already memorised.As a safety measure, the driver must only change speed settings when stationary.Changing a speed settingSpeed settings can be activated, deactivated, selected and changed in the Driving/ Vehicle touch screen menu."MEM" buttonWith this button, you can select a memorised speed setting to use with the speed limiter or the programmable cruise control.For more information on the Speed limiteror Cruise control, refer to the corresponding section.Road signs recognitionFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131