Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Driving Gear shift indicator

126Driving►Fully depress the accelerator pedal, or►Select another mode.In case of non-use of the vehicle for a long period (several months), a restart of the petrol engine may occur even if the battery is charged.In the event of multiple starts of the internal combustion engine without a sufficient rise in temperature,Electricmodemay be temporarily unavailable (natural phenomenon of dilution of fuel in oil). The message "Electric mode unavailable: automatic operation in progress" then appears on the instrument panel.To regain normal electrical operation, drive approximately 50 miles (80 km) in "motorway" conditions or approximately 125 miles (200 km) in urban conditions.This phenomenon does not cause any mechanical or electrical damage. It can occur several times in the life of the vehicle.HybridTo optimise the vehicle's fuel consumption by managing the alternating or simultaneous operation of the two types of engine, depending on driving conditions and driving style.In Hybrid mode, it is possible to drive in 100% electric mode if the battery charge level is sufficient and acceleration requirements are moderate.SportTo obtain more dynamic driving in order to benefit from the maximum performance of the vehicle.Electric power is used to supplement the petrol engine as long as there is energy left in the battery.4WD (4-wheel drive)(Depending on version)Improves the vehicle's grip at low and moderate speeds by driving all 4 wheels continuously.4WD mode (4-wheel drive) is especially suited to driving on snow-covered roads and difficult terrain (e.g.mud, sand) as well as ford crossings, at moderate speed.Depending on the driving conditions and the battery charge level, 4WD mode may be 100% electric.If the system does not detect a situation of wheel slipping or poor grip after 300 metres of driving, it switches to Hybrid mode.This mode will be even more effective if the vehicle is fitted with suitable tyres, such as winter tyres.The grip can be improved up to 84 mph (135km/h) using the electric motors; above this speed, the vehicle is driven by the front wheels only.Gear shift indicator(Depending on engine)This system is designed to reduce fuel consumption by recommending the most suitable gear.OperationDepending on the driving situation and the vehicle's equipment, the system may recommend skipping one or more gears.Gear engagement recommendations are not to be considered mandatory. Indeed, the configuration of the road, the traffic density and safety remain determining factors when choosing the best gear. Therefore, the driver remains responsible for deciding whether or not to follow the system’s advice.The system cannot be deactivated.With an automatic gearbox, the system is only active in manual operation.The information appears on the instrument panel, in the form of an arrow and the recommended gear.The system adapts the gear change instructions according to the driving conditions (e.g.slope, load) and driving style (e.g.power demand, acceleration, braking).The system never suggests:–engaging first gear;–engaging reverse gear.
127Driving6Stop & StartThe Stop & Start function puts the engine temporarily into standby - STOP mode - during phases when the vehicle is stationary (e.g.red lights, traffic jams). The engine automatically restarts - START mode - as soon as the driver indicates the intention of moving off again.Primarily designed for urban use, the function is intended to reduce fuel consumption and exhaust emissions as well as the noise level when stationary.The function does not affect the functionalities of the vehicle, in particular the braking.Deactivation/ReactivationThe function is activated by default when the ignition is switched on.The settings are changed via the Driving/Vehicle touch screen menu.A message on the instrument panel confirms the change of status.When the function is deactivated, if the engine was in standby, it restarts immediately.Associated indicator lampsFunction activated. Function deactivated or malfunction. Opening the bonnetBefore doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury caused by the engine restarting automatically.Driving on flooded roadsBefore entering into a flooded area, it is strongly recommended that you deactivate the Stop & Start system.For more information on Driving recommendations, particularly on flooded roads, refer to the corresponding section.OperationMain conditions for operation–The driver’s door must be closed.–The driver's seat belt must be fastened.–The level of charge in the battery must be sufficient.–The temperature of the engine must be within its nominal operating range.–The outside temperature must be between 0°C and 35°C.Putting the engine into standby (STOP mode)The engine automatically enters standby mode as soon as the driver indicates their intention to stop:–With a manual gearbox, at speeds below 2 mph (3 km/h) on 1.5 BlueHDi versions, or with the vehicle stationary on 1.2 PureTech versions, when you place the gear lever in neutral and release the clutch pedal.–With an automatic gearbox, at speeds below 12 mph (20 km/h) on BlueHDi versions, or with the vehicle stationary on other versions, when you depress the brake pedal or place the gear selector in mode N.Time counterA time counter adds up the time spent in standby during the journey. It is reset to zero every time the ignition is switched on.Special casesThe engine will not go into standby if the conditions for operation are not met and in the following cases:–Steep slope (ascending or descending).–Vehicle has not exceeded 6 mph (10km/h) since the last engine start.–Sport mode selected (depending on equipment).–Electric parking brake applied or being applied.–Needed to maintain a comfortable temperature in the passenger compartment.–Demisting active.In these cases, this indicator lamp flashes for a few seconds, then goes off.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131