Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Driving Blind spot monitoring

154DrivingThe system assesses the driver's level of alertness, fatigue and distraction by identifying trajectory changes in relation to the lane markings.To do this, the system uses a camera, placed on the upper part of the windscreen.This system is particularly suited to fast roads (speed higher than 43 mph (70km/h)).At a first alert level, the driver is warned by the message "Be vigilant!", accompanied by an audible signal.After three first-level alerts, the system triggers a further alert with the message "Dangerous driving: take a break", accompanied by a more pronounced audible signal.In certain driving conditions (poor road surface or strong winds), the system may give alerts independent of the driver's level of vigilance.The following situations may interfere with the operation of the system or prevent it from working:–lane markings absent, worn, hidden (snow, mud) or multiple (roadworks);–close to the vehicle ahead (lane markings not detected);–roads that are narrow, winding, etc.Blind spot monitoringFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system warns the driver of a potential danger posed by the presence of another vehicle (car, lorry, motorcycle) in the vehicle's blind spots (areas hidden from the driver's field of vision) using sensors located on the sides of the bumpers.A warning lamp appears in the door mirror on the side in question:–fixed, immediately, when being overtaken.–flashing, after a delay of about one second, when overtaking a vehicle slowly, and when the direction indicator is used.Activation/DeactivationIt is set via the Driving/Vehicle touch screen menu.When the function is activated, this indicator lamp comes on in the instrument panel.When starting the vehicle, thewarninglamp comes on in each mirror to indicate that the system is activated.The status of the system is memorised when the ignition is switched off.The system is automatically deactivated when towing with a towing device approved by PEUGEOT.Operating conditions–All vehicles are moving in the same direction and in adjacent lanes.
155Driving6–The speed of your vehicle must be between 7 and 87 mph (12 and 140km/h).–When overtaking a vehicle, the speed difference is less than 6mph (10km/h).–When overtaken by a vehicle, the speed difference is less than 16mph (25km/h).–Traffic is flowing normally.–Overtaking a vehicle over a certain period of time and the vehicle being overtaken remains in the blind spot.–You are driving on a straight or slightly curved road.–Your vehicle is not pulling a trailer, a caravan, etc.Operating limitsNo alert is triggered in the following conditions:–presence of stationary objects (e.g.parked vehicles, safety rails, lampposts, signs).–vehicles travelling in the opposite direction.–on winding roads or in case of sharp turns.–when overtaking or being overtaken by a very long vehicle (e.g.truck, bus), which is both detected in a blind spot from behind and present in the driver's field of vision from the front.–quick overtaking manoeuvre.–very heavy traffic: vehicles detected in front and behind are confused with a lorry or a stationary object.–activation ofthePark Assistfunction. MalfunctionIn the event of a malfunction, this warning lamp flashes for a few moments in the instrument panel, accompanied by the Service warning lamp coming on and the display of a message.Have it checked by a PEUGEOT dealer or a qualified workshop.The system may be temporarily disturbed by certain climatic conditions (e.g.rain, hail).In particular, driving on a wet road or going from a dry to a wet area can cause false alerts (e.g.presence of a cloud of water droplets in the blind spot interpreted as a vehicle).In bad or wintry weather, ensure that the sensors are not covered by mud, ice or snow.Take care not to cover the warning zone in the door mirrors, or the detection zones on the front and rear bumpers with adhesive labels or other objects; they may hamper correct operation of the system.Parking sensorsFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131