Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Driving Adaptive cruise control

139Driving6The selection screen closes after a few moments.This setting becomes the new cruise speed.To modify the cruise speed setting using the speed suggested by the Road signs recognition shown on the instrument panel:►Press button5 once; a message is displayed to confirm the memorisation request.►Press button5 again to save the suggested speed.The speed is immediately shown on the instrument panel as the new speed setting.Switching off►Turn the thumbwheel1 to the "OFF" position: the cruise control information disappears from the screen.MalfunctionDashes are displayed (flashing, initially, then fixed) in the event of a cruise control system malfunction.Have the system checked by a PEUGEOT dealer or a qualified workshop.Drive Assist PlusOnly available on versions with EAT8 automatic gearbox.This system automatically adjusts the speed and corrects the trajectory of the vehicle, using Adaptive cruise control with Stop&Go function in conjunction with Lane Positioning Assist.These two functions must be activated and in operation.For more information on Adaptive cruise control and Lane Positioning Assist, refer to the corresponding sections.The system assists the driver by acting on the steering, acceleration and braking within the physical limitsand capacities of the vehicle. Certain road infrastructure elements or vehicles in the surroundings may not be properly seen or may be poorly interpreted by the camera and radar, resulting in an unexpected change in direction, a lack of steering correction and/or inappropriate management of acceleration or braking.Primarily designed for driving on main roads and motorways, this system only works with moving vehicles driving in the same direction as your vehicle.Adaptive cruise controlFor more information, refer to the General recommendations on the use of driving and manoeuvring aids and the Cruise control - Specific recommendations.This system automatically maintains the vehicle speed at a value set by the driver (speed setting), while respecting a safety distance from the vehicle in front (target vehicle) previously set by the driver. The system automatically manages the acceleration and deceleration of the vehicle.With a manual gearbox, the system slows the vehicle down as far as a speed of 19 mph (30 km/h).With the Stop function (with the EAT6 automatic gearbox), the system manages braking until the vehicle comes to a complete stop.With the Stop & Go function (with the EAT8 automatic gearbox), the system manages braking until the vehicle comes to a complete stop and restarts the vehicle.The brake lamps come on if the vehicle is slowed down by the system.It can be dangerous to drive if the brake lamps are not in perfect working order.To do this, the system uses a camera fitted at the top of the windscreen and, depending on version, a radar fitted in the front bumper.
140DrivingPrimarily designed for driving on main roads and motorways, this system only works with moving vehicles driving in the same direction as your vehicle.If the driver activates the direction indicator to overtake a slower vehicle, cruise control may temporarily reduce the distance to the target vehicle to facilitate overtaking, without exceeding the speed setting.Steering-mounted controls1.ON (CRUISE position)/OFF2.Activation of cruise control at the current speed/decrease speed setting3.Activation of cruise control at the current speed/increase speed setting4.Pause/resume cruise control with the speed setting previously savedConfirmation of vehicle restart after automatic stop (versions with Stop & Go function)5.Depending on version:Display the speed thresholds saved using the Memorising speeds functionorUse the speed suggested by the Road signs recognition (MEM display)6.Display and adjustment of the distance setting to the vehicle in frontUseActivating the system (pause)►With the engine running, turn the thumbwheel 1 downwards to the CRUISE position. Cruise control is ready to operate (grey display).Switching on cruise control and setting the speedWith a manual gearbox, your speed must be between 19 and 112mph (30 and 180km/h).With an automatic EAT6 gearbox, your speed must be between 1 and 112mph (2and 180km/h).With an automatic EAT8 gearbox, your speed must be between 0 and 112mph (0and 180km/h).►Press button 2 or 3: the current speed becomes the speed setting (minimum 19 mph (30km/h)) and cruise control is immediately activated (green display).►Press 3 to increase or 2 to decrease the speed setting (steps of 5mph (km/h) if held pressed).Pressing and holding button 2 or 3results in a rapid change in the speed of the vehicle.Pausing/resumption of cruise control►Press 4 or depress the brake pedal. To pause cruise control, it is also possible to:•shift from mode D to N;•depress the clutch pedal for more than 10 seconds;•press the electric parking brake control.►Press 4 to restart cruise control. Cruise control may have been paused automatically:•when the speed of the vehicle goes below 19 mph (30km/h) with a manual gearbox.•when the speed of the engine goes below 1100 rpm with a manual gearbox.•by triggering of the ESC system.With a manual gearbox, the driver should depress the accelerator pedal to move off, then, when above 19 mph (30km/h), reactivate the system by pressing one of the buttons 2, 3 or 4.With an EAT6 gearbox, following braking that has brought the vehicle to a complete stop, the system holds the vehicle stationary; cruise control is paused. The driver should depress the accelerator pedal to move off, then, when above 1 mph (2km/h), reactivate the system by pressing one of the buttons 2, 3 or 4.With an EAT8 gearbox, following braking that has brought the vehicle to a complete stop, if the traffic conditions do not allow the vehicle to begin moving again within 3seconds of stopping,
141Driving6press button 4 or the accelerator pedal to move off.If the driver takes no action after the vehicle has been stopped, the electric parking brake is applied automatically after about 5 minutes.Cruise control remains active after changing gear, regardless of the gearbox type.When the driver attempts to reactivate cruise control, after the function has been paused, the message "Activation not possible, unsuitable conditions" is briefly displayed if reactivation is not possible (safety conditions not met).Changing the programmed speed setting with the Road signs recognition function►Press 5 to accept the speed suggested by the function on the instrument panel, then press again to confirm.To prevent sudden acceleration or deceleration of the vehicle, select a speed setting relatively close to the vehicle's current speed.Changing the inter-vehicle distance►Press 6 to display the distance setting thresholds ("Distant", "Normal" or "Close"), then press again to select a threshold.After a few seconds, the option is accepted and will be memorised when the ignition is switched off.Temporarily exceeding the speed setting►Press the accelerator pedal fully. Distance monitoring and cruise control are deactivated while acceleration is maintained. "Cruise control suspended" is displayed.Deactivating the system►Turn the thumbwheel 1 upwards to the OFFposition.Information displayed on the instrument panelThe following information can be seen on the instrument panel in "DRIVING" display mode.7.Vehicle detected by the system (full symbol)8.Cruise control active (colour not grey)9.Speed setting value10.Speed suggested by the Road signs recognition11.Vehicle held stationary (versions with automatic gearbox)12.Inter-vehicle distance setting13.Position of the vehicle detected by the systemMessages and alertsTo display the following information on the instrument panel, select the "Driving" display mode.The actual order in which these messages or alerts are displayed may vary."Cruise paused" or "Cruise control on hold" following brief acceleration by the driver."Active cruise control", no vehicle detected."Cruise paused", vehicle detected. "Active cruise control", vehicle detected. (orange)"Take back control".►Brake or accelerate, depending on the context.
142Driving(red)"Take back control".►Take back control of the vehicle immediately: the system cannot manage the current driving situation."Activation refused, conditions unsuitable".The system refuses to activate cruise control, as the necessary conditions are not fulfilled.Stop function"Cruise paused" (for a few seconds).The system has brought the vehicle to a complete stop and is keeping it immobilised: cruise control is paused.The driver must accelerate to move off again, then reactivate cruise control.Stop & Go function"To pick up again: accelerate or press the II button".The system has brought the vehicle to a complete stop.Within 3 seconds, the vehicle gradually and automatically begins moving again.Beyond 3 seconds, the driver must accelerate or press 4-II to move off again.While the vehicle is immobilised, the following recommendations apply:–The driver should not leave the vehicle.–Do not open the boot.–Do not drop off or pick up passengers.–Do not engage reverse gear.When moving off again, watch out for cyclists, pedestrians and animals, as they may not be detected properly.Operating limitsCruise control operates by day and night, in dry weather or moderate rainfall.Certain situations cannot be managed by the system and require driver intervention.Cases not taken into account by the system:–Pedestrians, cyclists, animals.–Stationary vehicles (e.g.traffic jams, breakdown).–Vehicles crossing your lane.–Vehicles driving in the opposite direction.Situations where the driver must suspend the system:–Vehicles in a tight bend.–When approaching a roundabout.–When following a narrow vehicle.Reactivate the system when conditions allow.Situations in which the driver is prompted to immediately resume control:–Excessively sharp deceleration by the vehicle in front of you.–When a vehicle cuts in sharply between your vehicle and the one in front.Some vehicles on the road may be poorly perceived or interpreted by the camera and/or the radar (e.g.truck), which
143Driving6can lead to an incorrect evaluation of distances and result in inappropriate acceleration or braking of the vehicle.Pay particular attention:–When motorcycles are present and when there are vehicles staggered across the traffic lane.–When entering a tunnel or crossing a bridge.If any of the following malfunctions occurs, do not use the system:–Following an impact on the windscreen close to the camera or on the front bumper (versions with radar).–Brake lamps not working.If the vehicle has undergone any of the following modifications, do not use the system:–Carrying long objects on roof bars.–Towing.–Use of the "space-saver" type spare wheel (depending on version).–Front end of the vehicle modified (for example by adding long-range headlamps or painting the front bumper).–Obstructed radar.MalfunctionIn the event of a malfunction, dashes are displayed instead of the speed setting.This warning lamp comes on, accompanied by a message and an audible signal, to confirm the malfunction.Have it checked by a PEUGEOT dealer or a qualified workshop.Lane positioning assistFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.The system identifies the edges of the traffic lane and steers the vehicle to keep it inside this lane and maintain the lateral position chosen by the driver.To do this, the system uses a camera placed on the upper part of the windscreen.This system is particularly suited to driving on motorways and main roads.Operating conditions–Adaptive cruise control active.–Traffic lane marked out by lines on both sides.–ESC system operational.–ASR/CDS systems activated.–No trailer detected.–No 'space-saver' spare wheel in use.–Vehicle not subject to strong lateral g-forces.–Direction indicators not activated.Activation/Deactivation►With the Adaptive cruise control with Stop & Go function activated, press this button.The action is confirmed by:–The indicator lamp in the button lighting up green.–The following symbol being displayed on the instrument panel.The colour of the symbol on the instrument panel depends on the operating status of the system:(grey colour)One or more operating conditions is not met; the system is paused.(green colour)
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131