Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Dashboard instruments Touch screen

22Dashboard instruments►Pressing the button located on the end of the wiper control stalk displays the following tabs in turn:–Current information:•Total range (Petrol or Diesel).•Current consumption (Petrol or Diesel).•Stop & Start time counter (Petrol or Diesel).•Percentage of the current journey travelled in all-electric driving mode (Rechargeable hybrid).–Trips "1" then "2":•Average speed.•Average fuel consumption.•Distance travelled.Trip reset►When the desired trip is displayed, press the button on the end of the wiper control stalk for more than 2seconds.Trips "1" and "2" are independent and are used in the same way.DefinitionsRange(miles or km)Distance that can still be travelled with the fuel remaining in the tank (based on the average fuel consumption over the last few miles (kilometres) travelled).This value may vary following a change in driving style or terrain, leading to a significant change in current fuel consumption.When the range falls below 19 miles (30km), dashes are displayed.After filling with at least 5 litres of fuel, the range is recalculated and is displayed if it exceeds 62 miles (100km).Dashes appearing permanently in place of numbers while driving indicates a malfunction.Consult a PEUGEOT dealer or a qualified workshop.Current consumption(mpg or l/100km or km/l)Calculated during the last few seconds. This function is only displayed at speeds above 19 mph (30km/h).Average consumption(mpg or l/100km or km/l)Calculated since the last trip computer reset.Average speed(mph or km/h)Calculated since the last trip computer reset.Distance travelled(miles or km)Calculated since the last trip computer reset.Stop & Start time counter(minutes/seconds or hours/minutes) If your vehicle is fitted with the Stop & Start function, a time counter calculates the time spent in STOP mode during a journey.The time counter is reset each time the ignition is switched on.Touch screenThis system gives access to the following elements:–Permanent display of the time and outside temperature (a blue warning lamp appears if there is a risk of ice).–Heating/air conditioning system controls.–Vehicle functions and equipment setting menus.–Audio system and telephone controls and display of related information.
23Dashboard instruments1–Display of visual manoeuvring aid functions (visual parking sensor information, Park Assist, etc.).–Internet services and display ofrelated information.–Navigation system controls and displayofrelated information (depending on version).For safety reasons, always stop the vehicle before performing operations that require sustained attention.Some functions are not accessible while driving.RecommendationsThis screen is of the capacitive type.–Do not use pointed objects on the touch screen.–Do not touch the touch screen with wet hands.–Use a soft, clean cloth to clean the touch screen.Principles►Use the buttons arranged below the touch screen to access the menus, then press the buttons that appear on the touch screen.Some menus may display across two pages: press the "OPTIONS" button to access the second page.After a few moments with no action on the second page, the first page is displayed automatically.To deactivate/activate a function, select "OFF" or "ON".Configuring a functionAccess to additional information on the functionConfirmReturn to the previous page or confirmVolume adjustment/mute. MenusPress the touch screen with three fingers to show all of the menu buttons.For more information about the menus, refer to the sections describing the audio and telematics systems.Radio/MediaClimateSettings for temperature, air flow, etc.For more information on Dual-zone automatic air conditioning, refer to the corresponding section.Navigation (Depending on equipment) Driving or Vehicle (Depending on equipment)Activation, deactivation and settings for certain functions.The functions are organised in 2 tabs: "Driving functions" and "Vehicle settings".TelephoneApplicationsAccess to certain configurable equipment.EnergyAccess to the rechargeable hybrid system features (energy flow, consumption statistics, deferred charging, eSave function).Energy menuFlowThe page shows the operation of the rechargeable hybrid system in real time.
24Dashboard instruments1.Active driving mode2.Petrol engine3.Electric motor(s)4.Traction battery charge levelThe energy flows have a colour for each type of driving: –Blue: 100% electrical energy.–Orange: energy from the petrol engine.–Green: energy recovery.StatisticsThis page shows electrical energy and fuel consumption statistics.1. Average electrical consumption for the current trip (kWh/100km) and historical values:–Blue bar chart: directly consumed energy supplied by the traction battery.–Green bar chart: energy recovered during deceleration and braking, used to recharge the battery.2. Average fuel consumption for the current trip (kWh/100km) and historical values (orange bar chart).►You can change the displayed time scale by pressing the- or + buttons.A current trip is any trip of more than 20 minutes without switching off the ignition.ChargingThis page allows you to programme deferred charging.For more information on Charging the traction battery (Rechargeable hybrid), refer to the corresponding section.eSaveThe eSave function makes it possible to reserve all or part of the electrical energy in the traction battery for later use during a journey (e.g. driving in an urban area or in an area reserved for electric vehicles).►Select the electric range to be reserved (10 km, 20 km or the full range MAX) then activate the function by pressing ON.Activation of the function is confirmed by the lighting of this indicator lamp on the instrument panel and theindication of theenergy reserve in miles or kms.►To use the energy reserve, choose the Electric driving mode in the mode selector.If the requested range exceeds the available range (not recommended), the internal combustion engine starts to recharge the traction battery up to the requested threshold. This leads to excessive fuel consumption.Upper barCertain information is displayed permanently in the upper bar of the touch screen:–Time and outside temperature (a blue warning lamp appears if there is a risk of ice).–Reminder of the air conditioning information, and direct access to the corresponding menu.–Reminder of information from the RadioMediaandTelephone menus and navigation instructions (depending on equipment).–Notifications.–Access to the Settings for the touch screen and the digital instrument panel (date/time, languages, units, etc.).Remotely operable additional functions (Rechargeable hybrid)(Depending on country of sale)
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131