Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Access Panoramic sunroof

39Access2Manual operation►To open/close the window, press/pull the switch without passing the point of resistance; the window stops as soon as the switch is released.Automatic operation►To open/close the window, press/pull the switch past its resistance point: the window opens/closes completely when the switch is released.Operating the switch again stops the movement of the window.Window controls remain operational for approximately 45 seconds after switching off the ignition or after locking the vehicle.After that time, the controls are disabled. To reactivate them, switch on the ignition or unlock the vehicle.Anti-pinchIf the window meets an obstacle while rising, it stops and immediately partially lowers again.Deactivating the rear controls for the rear electric windowsFor your children's safety, press control 5 to deactivate the controls for the rear electric windows, irrespective of their positions.The red indicator lamp in the button comes on and a confirmation message is displayed. The lamp will remain lit until the controls are reactivated.The rear electric windows can still be controlled using the driver's controls.Reinitialising the electric windowsAfter reconnecting the battery, or in the event of abnormal window movement, the anti-pinch function must be reinitialised.The anti-pinch function is disabled during the following sequence of operations.For each window:►Lower the window fully, then raise it; it will rise in steps of a few centimetres each time the control is pressed. Repeat the operation until the window is fully closed.►Continue to pull the control for at least one second after the window reaches the closed position.If an electric window meets an obstacle during operation, the movement of the window must be reversed. To do this, press the relevant control.When the driver operates the passengers’ electric window controls, it is important to ensure that nothing can prevent the window from closing properly.It is important to ensure that passengers use the electric windows correctly.Pay particular attention to children when operating the windows.Be aware of passengers and/or other persons present when closing windows using the key or the "Keyless Entry and Start" system.Do not put your head or arms through the open windows when the vehicle is moving - risk of serious injury!Panoramic sunroofThe panoramic sunroof consists of a movable glass panel that slides over the roof and a blind that can be opened independently. Opening the sunroof automatically opens the blind.►To operate the panoramic sunroof or the blind, use the buttons in the roof console.
40AccessA.Sunroof blind controlB.Sunroof controlThe sunroof or blind can be operated when the ignition is turned on (if the battery is charged enough), with the engine running, in STOP mode of Stop & Start, and up to 45seconds after turning off the ignition or after locking the vehicle.PrecautionsDo not put your head or arms through the sunroof while the vehicle is moving - risk of serious injury!Ensure that any luggage or accessories carried on the roof bars do not interfere with the movement of the sunroof.Do not place heavy loads on the movable glass panel of the sunroof.If the sunroof is wet, following a shower or washing the vehicle, wait until it is completely dry before opening.Do not operate the sunroof if it is covered by snow or ice - risk of damage!Use only plastic scrapers to remove snow or ice from the sunroof.Regularly check the condition of the sunroof seals (e.g.presence of dust, dead leaves).If using a car wash, check first that the roof is correctly closed and keep the high-pressure jet at least 30 centimetres from the seals.Never leave the vehicle with the sunroof open.OperationWhen opening the sunroof fully, the movable glass moves to a partially open position, then slides over the roof. Any intermediate position is possible.Depending on the speed of the vehicle, the partially open position may vary to improve the acoustics.Before operating the sunroof or blind control buttons, ensure that no object or person might prevent the movement.Be particularly aware of children when operating the sunroof or blind.If something is trapped when operating the sunroof or blind, you should reverse the movement of the sunroof or blind by pressing the control in question.The driver must ensure that passengers use the sunroof and blind correctly.Anti-pinch systemIf the sunroof or blind encounters an obstacle when closing, the movement is automatically reversed.The roof anti-pinch system is designed to be effective at speeds of up to 75 mph (120km/h).Opening/Closing►To open the sunroof or the blind, use the part of the button located towards the rear of the vehicle.►To close the sunroof or the blind, use the part of the button located towards the front of the vehicle.Operation of buttons►Pressing a button beyond its point of resistance directly opens or closes the sunroof or blind fully.►Pressing the button again stops the current movement.
41Access2►When holding a button (without going beyond the point of resistance), the movement of the sunroof or blind stops when this button is released.►When the sunroof is closed: pressing once without passing the point of resistance moves it to a partially open position.►When the sunroof is partially open: pressing once without passing the point of resistance opens or closes it fully.The sunroof and windows, then the blind, can be closed by holding down the door locking control. The manoeuvre stops as soon as the locking control is released.Closing of the blind is limited by the position of the sunroof: the blind cannot go further than the front of the movable glass. During simultaneous movements of the sunroof and blind, the blind automatically stops or resumes movement depending on the position of the sunroof.ReinitialisationFollowing reconnection of the battery or in the event of a fault or jerky movement of the sunroof or blind, reinitialisation is required.►Check that nothing is interfering with the sunroof or blind and that the seals are clean.►With the ignition on, fully close the sunroof and blind.►Press and hold the front part of button B, until the sunroof and blind move slightly, then hold for a further 1 second before releasing.►Wait 2seconds and then press and hold the front part of button B. The blind and the sunroof will open and close, one after the other. When both are completely closed again, hold for a further 2 seconds and release.If there is an operating fault, restart the whole procedure.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131