Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Access Electric windows

38AccessLocking the vehicle with exterior perimeter monitoring onlyDeactivate the interior volumetric and anti-tilt monitoring to avoid the unwanted triggering of thealarm,in certain cases such as:–Slightly open window.–Washing the vehicle.–Changing a wheel.–Towing the vehicle.–Transport on a ship or ferry.Deactivating the interior volumetric and anti-tilt monitoring►Switch off the ignition and within 10 seconds press the alarm button until its red indicator lamp is on fixed.►Get out of the vehicle.►Immediately lock the vehicle using the remote control or the Keyless Entry and Start system.Only the exterior perimeter monitoring is activated; the button's red indicator lamp flashes once every second.To take effect, this deactivation must be carried out after each time the ignition is switched off.Reactivating the interior volumetric and anti-tilt monitoring►Deactivate the exterior perimeter monitoring by unlocking the vehicle using the remote control or the Keyless Entry and Start system.The indicator lamp in the button goes off.►Reactivate all monitoring by locking the vehicle using the remote control or the Keyless Entry and Start system.The red indicator lamp in the button once again flashes every second.Triggering of the alarmThis is indicated by sounding of the siren and flashing of the direction indicators for 30 seconds.Depending on the country of sale, certain monitoring functions remain active until the alarm has been triggered eleven times consecutively.When the vehicle is unlocked using the remote control or the Keyless Entry and Start system, rapid flashing of the red indicator lamp in the button informs you that the alarm was triggered during your absence. When the ignition is switched on, this flashing stops.Failure of the remote controlTo deactivate the monitoring functions:►Unlock the vehicle using the key in the driver's door lock.►Open the door; the alarm is triggered.►Switch on the ignition; this stops the alarm. The indicator lamp in the button goes off.Locking the vehicle without activating the alarm►Lock or deadlock the vehicle using the key (built-in the remote control) in the driver's door lock.MalfunctionWhen the ignition is switched on, the fixed lighting of the red indicator lamp in the button indicates a system malfunction.Have it checked by a PEUGEOT dealer or a qualified workshop.Electric windows1.Left-hand front2.Right-hand front3.Right-hand rear4.Left-hand rear5.Deactivation of electric window controls located by rear seats
39Access2Manual operation►To open/close the window, press/pull the switch without passing the point of resistance; the window stops as soon as the switch is released.Automatic operation►To open/close the window, press/pull the switch past its resistance point: the window opens/closes completely when the switch is released.Operating the switch again stops the movement of the window.Window controls remain operational for approximately 45 seconds after switching off the ignition or after locking the vehicle.After that time, the controls are disabled. To reactivate them, switch on the ignition or unlock the vehicle.Anti-pinchIf the window meets an obstacle while rising, it stops and immediately partially lowers again.Deactivating the rear controls for the rear electric windowsFor your children's safety, press control 5 to deactivate the controls for the rear electric windows, irrespective of their positions.The red indicator lamp in the button comes on and a confirmation message is displayed. The lamp will remain lit until the controls are reactivated.The rear electric windows can still be controlled using the driver's controls.Reinitialising the electric windowsAfter reconnecting the battery, or in the event of abnormal window movement, the anti-pinch function must be reinitialised.The anti-pinch function is disabled during the following sequence of operations.For each window:►Lower the window fully, then raise it; it will rise in steps of a few centimetres each time the control is pressed. Repeat the operation until the window is fully closed.►Continue to pull the control for at least one second after the window reaches the closed position.If an electric window meets an obstacle during operation, the movement of the window must be reversed. To do this, press the relevant control.When the driver operates the passengers’ electric window controls, it is important to ensure that nothing can prevent the window from closing properly.It is important to ensure that passengers use the electric windows correctly.Pay particular attention to children when operating the windows.Be aware of passengers and/or other persons present when closing windows using the key or the "Keyless Entry and Start" system.Do not put your head or arms through the open windows when the vehicle is moving - risk of serious injury!Panoramic sunroofThe panoramic sunroof consists of a movable glass panel that slides over the roof and a blind that can be opened independently. Opening the sunroof automatically opens the blind.►To operate the panoramic sunroof or the blind, use the buttons in the roof console.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131