Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2016-2023 Access Back-up procedures

30AccessTo preserve the battery charge in the electronic key and the vehicle's battery, the "hands-free" functions are set to hibernation mode after 21 days without use. To restore these functions, press one of the remote control buttons or start the engine with the electronic key against the back-up reader.For more information on starting with the Keyless Entry and Start system, refer to the corresponding section.Electrical interferenceThe electronic key may not work if it is close to an electronic device (e.g.mobile telephone (switched on or on standby), laptop computer, strong magnetic fields). If this occurs, move the electronic key away from the electronic device.Central lockingManual►Press this button to lock/unlock the vehicle (doors and boot) from inside the vehicle. The indicator lamp comes on to confirm the central locking of the vehicle.Central locking does not take place if any of the doors are open.When locking/deadlocking from the outsideWhen the vehicle is locked or deadlocked from the outside, the indicator lamp flashes and the button is deactivated.►After normal locking, pull one of the interior door controls to unlock the vehicle.►After deadlocking, you must use the remote control, the "Keyless Entry and Start" system or the built-in key to unlock the vehicle.Automatic (anti-intrusion security)The doors and boot lock automatically while driving (speed above 6 mph (10km/h)).To deactivate/reactivate this function (activated by default):►Press the button until an audible signal is triggered and a confirmation message appears.Transporting long or voluminous objectsPress the central locking control to drive with the boot open and the doors locked. Otherwise, every time the speed of the vehicle exceeds 6 mph (10 km/h), the sound of the locks rebounding will be heard and an alert will be displayed.Back-up proceduresLost keys, remote control, electronic keyGo to a PEUGEOT dealer with the vehicle's registration certificate, your personal identification documents and if possible, the label bearing the key code.The PEUGEOT dealer will be able to retrieve the key code and the transponder code, enabling a new key to be ordered.Complete unlocking/locking of the vehicle with the keyUse this procedure in the following situations:–Remote control battery discharged.–Remote control malfunction.–Vehicle battery discharged.–Vehicle in an area subject to strong electromagnetic interference.
31Access2In the first case, change the remote control battery.In the second case, reinitialisethe remote control.Refer to the corresponding sections.►Insert the key in the door lock.►Turn the key towards the front/rear to unlock/lock the vehicle.►Turn the key towards the rear again within 5seconds to deadlock the vehicle.If the vehicle is fitted with an alarm, it will not be activated when locking with the key.If the alarm is activated, the siren sounds when the door is opened; switch on the ignition to stop it.Central locking not functioningUse these procedures in the following cases:–Central locking malfunction.–Battery disconnected or discharged.In the event of a malfunction of the central locking system, the battery must be disconnected to ensure that the vehicle is locked fully.Front left-hand door►Insert the key into the lock and turn it towards the rear of the vehicle to lock the door, or towards the front to unlock it.Other doorsUnlocking►Pull the interior door opening control.Locking►Open the doors.►For the rear doors, check that the child lock is not on.Refer to the corresponding section.►Remove the black cap, located on the edge of the door, using the key.►Insert the key into the socket without forcing it, then turn the latch towards the inside of the door.►Remove the key and refit the black cap.►Close the doors and check from the outside that the vehicle is locked.Changing the batteryA message is displayed on the instrument panel when the battery needs changing.Battery type: CR2032/3 volts.►Unclip the cover by inserting a small screwdriver in the slot and lift the cover.►Remove the flat battery from its housing.►Put the new battery in place, respecting the polarity. Start by inserting it into the contacts located in the corner, then clip the cover onto the unit.►Reinitialise the remote control.For more information on Reinitialising the remote control, refer to the corresponding section.Do not throw remote control batteries away, as they contain metals that are
32Accessharmful to the environment. Take them to an approved disposal point.This equipment contains a button type battery.Do not swallow the battery. Risk of chemical burns!Swallowing the battery can cause serious internal burning in only 2 hours and can be fatal.If batteries have been swallowed or inserted into a part of the body, seek immediate medical advice.Keep new and used batteries out of the reach of children.If the battery compartment does not close properly, stop using the product and keep it out of the reach of children.Risk of explosion if the battery is replaced with an incorrect type!Replace the battery with the same type.Risk of explosion or leaking of inflammable liquid or gas!Do not use in/store in/place in an environment where the temperature is extremely high or where the pressure is extremely low due to very high altitude.Do not try to burn, crush or cut a used battery.Reinitialising the remote controlFollowing replacement of the battery or in the event of a fault, it may be necessary to reinitialise the remote control.►Insert the mechanical key (incorporated into the remote control) into the lock to open the vehicle.►Place the electronic key against the back-up reader on the steering column and hold it there until the ignition is switched on.►With a manual gearbox, place the gear lever in neutral then fully depress the clutch pedal.►With an automatic gearbox, while in mode P, depress the brake pedal.►Switch on the ignition by pressing the "START/STOP" button.If the fault persists after reinitialisation, contact a PEUGEOT dealer or a qualified workshop without delay.DoorsOpeningFrom outside►After unlocking the vehicle or with the "Keyless Entry and Start" system electronic key in the recognition zone, pull the door handle.From inside►Pull the interior opening control of a door; this unlocks the vehicle completely.With selective unlocking activated:–Opening the driver's door unlocks the driver's door only (if the vehicle has not already been completely unlocked).–Opening one of the passenger doors unlocks the rest of the vehicle.BootOpening the tailgate
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131