Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Visibility Lighting controls

86LIGHTING CONTROLS System for selection and control of the various front and rear lamps providing the vehicle's lighting. Main lighting The various front and rear lamps of the vehicle are designed to adapt the lighting progressively in relation to the climatic conditions and so improve the driver's visibility: - sidelamps, to be seen, - dipped beam headlamps to see without dazzling other drivers, - main beam headlamps to see clearly when the road is clear, - directional headlamps for improved visibility when cornering. Additional lighting Other lamps are installed to fulfi l the requirements of particular driving con-ditions: - a rear foglamp to be seen from a distance, - front foglamps for even better visibility, - daytime running lamps to be seen during the day. Programming Various automatic lighting control modes are also available according to the following options: - guide-me-home lighting, - automatic lighting, - directional headlamps. Model without AUTO lighting Model with AUTO lighting Automatic illumination of headlamps. Manual controls The lighting commands are issued di-rectly by the driver by means of the ring Aand the stalk B . A. Main lighting mode selection ring: turn it to position the symbol re-quired facing the mark. Lamps off. Sidelamps only. B.Stalk for switching headlamps: pull to switch the lighting between dipped headlamps/main beam headlamps. In the lamps off and sidelamps modes, the driver can switch on the main beam headlamps temporarily ("headlamp fl ash") by maintaining a pull on the stalk. Dipped headlamps or main beam headlamps. Displays Lighting of the corresponding indicator lamp on the instrument panel confi rms the switching on of the lighting selected.
87 Model with rear foglamp only rear foglamp This operates with the dipped beam headlamps and main beam headlamps. To switch on the foglamp, turn the ring C forwards. To switch off the foglamp, turn the ring C rearwards. When the lighting is switched on auto-matically (with AUTO model), the dipped headlamps and sidelamps remain on until the rear foglamp is switched off. In good or rainy weather, by both day and night, the front foglamps and the rear foglamp are prohibited. In these situations, the power of their beams may dazzle other drivers. Do not forget to switch off the front foglamps and the rear foglamp when they are no longer necessary. Model with front and rear foglamps front and rear foglamps The rear foglamp operates with the dipped beam and main beam head-lamps. The front foglamps also operate with the sidelamps. To switch on the rear foglamp, turn the ring C forwards. To switch on the front foglamps, turn the ring C forwards again. To switch off the rear foglamp, turn the ring C rearwards. To switch off the front foglamps, turn the ring C rearwards again. C.Fog lamps selection ring. Lighting on audible warning When the ignition is switched off, all of the lamps switch off automatically, unless guide-me-home lighting is activated. If the lighting is switched on manually after switching off the ignition, there is an audible signal when a front door is opened to warn the driver that they have forgotten to switch off the vehicle's lighting, with the ignition off. When the lighting is switched on auto-matically (with AUTO model), the dipped headlamps and sidelamps remain on until the rear foglamp is switched off. When the lighting is switched off auto-matically (with AUTO model) or when the dipped headlamps are switched off manually, the foglamps and the side-lamps will remain on.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131