Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Visibility Automatic rain sensitive windscreen wipers

93Special position of the windscreen wipers Automatic rain sensitive windscreen wipers The windscreen wipers operate auto-matically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rain-fall. Activation This is controlled manually by the driver by pushing the stalk downwards to the "AUTO" position. It is accompanied by a message on the multifunction screen. This position permits release of the windscreen wiper blades. It is used for cleaning or replacement of the blades. It can also be useful, in winter, to detach the blades from the windscreen. In the moment following switching the ignition off, any action on the stalk posi-tions the wipers vertically on the wind-screen. Do not cover the rain sensor, linked with the sunshine sen-sor and located in the centre of the windscreen behind the rear view mirror. Switch off the automatic rain sensi-tive wipers when using an automatic car wash. In winter, to avoid damaging the wip-er blades, it is advisable to wait until the windscreen is completely clear of ice before activating the automatic rain sensitive wipers. The automatic rain sensitive wipers must be reactivated if the ignition has been off for more than one minute, by pushing the stalk downwards. Switching off This is controlled manually by the driver by moving the stalk upwards then re-turning it to position "0" . It is accompanied by a message on the multifunction screen. Operating fault If an automatic wiping malfunction oc-curs, the wipers will operate in intermit-tent mode. Have it checked by a PEUGEOT dealer. To park the wipers after this has been done, switch on the ignition and operate the stalk. To maintain the effectiveness of the "fl at-blade" wiper blades, it is advis-able to: - handle them with care, - clean them regularly using soapy water, - avoid using them to retain card-board on the windscreen, - replace them at the fi rst signs of wear.
93Special position of the windscreen wipers Automatic rain sensitive windscreen wipers The windscreen wipers operate auto-matically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rain-fall. Activation This is controlled manually by the driver by pushing the stalk downwards to the "AUTO" position. It is accompanied by a message on the multifunction screen. This position permits release of the windscreen wiper blades. It is used for cleaning or replacement of the blades. It can also be useful, in winter, to detach the blades from the windscreen. In the moment following switching the ignition off, any action on the stalk posi-tions the wipers vertically on the wind-screen. Do not cover the rain sensor, linked with the sunshine sen-sor and located in the centre of the windscreen behind the rear view mirror. Switch off the automatic rain sensi-tive wipers when using an automatic car wash. In winter, to avoid damaging the wip-er blades, it is advisable to wait until the windscreen is completely clear of ice before activating the automatic rain sensitive wipers. The automatic rain sensitive wipers must be reactivated if the ignition has been off for more than one minute, by pushing the stalk downwards. Switching off This is controlled manually by the driver by moving the stalk upwards then re-turning it to position "0" . It is accompanied by a message on the multifunction screen. Operating fault If an automatic wiping malfunction oc-curs, the wipers will operate in intermit-tent mode. Have it checked by a PEUGEOT dealer. To park the wipers after this has been done, switch on the ignition and operate the stalk. To maintain the effectiveness of the "fl at-blade" wiper blades, it is advis-able to: - handle them with care, - clean them regularly using soapy water, - avoid using them to retain card-board on the windscreen, - replace them at the fi rst signs of wear.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131