Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Practical Information Changing a bulb

PRACTICAL INFORMATION177 Risk of electrocution Xenon bulbs (D1S-35W) must be replaced by a PEUGEOT dealer. CHANGING A BULB Model with halogen headlamps 1.Direction indicators(HP24 amber-24W).2.Dipped beam headlamps (H7-55W).3.Main beam headlamps (H7-55W).4.Daytime running lamps (HP24-24W).5.Foglamps (PS24-24W).6.Sidelamps (W5-5W).1.Direction indicators(HP24 amber-24W).2.Dipped/main beam directional headlamps (D1S-35W).3.Daytime running lamps/sidelamps (P21/5W).4.Foglamps (PS24-24W). Model with xenon and directional headlamps The headlamps are fi tted with polycarbonate glass with a protective coating: do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product, use a sponge and soapy water, when using a high pressure washer on persistent marks, do not direct at the lamps or their outlines for too long, so as not to damage their protective coating and seals. Front lamps Do not touch the bulb directly with your fi ngers, use lint-free cloths. Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns). It is imperative to use only anti-ultra-violet (UV) type bulbs in order not to damage the headlamp. Always replace a failed bulb with a new bulb with the same type and specifi cation.
PRACTICAL INFORMATION178 Changing main beam headlamp and sidelamp bulbs Changing dipped beam headlamp bulbs (models with halogen headlamps) Remove the protective plastic cover by pulling on the tab. Disconnect the bulb connector. Extract the bulb by pulling and change it. To refi t, carry out these operations in reverse order. Remove the protective plastic cover by pulling on the tab. Disconnect the bulb connector. Remove the bulb by pulling and change it. To refi t, carry out these operations in reverse order. Changing direction indicator and daytime running lamp bulbs (models with halogen headlamps) Consult a PEUGEOT dealer.
PRACTICAL INFORMATION179 Changing sidelamp and daytime running lamp bulbs (models with xenon headlamps) Remove the protective plastic cover by pulling on the tab. Disconnect the bulb connector. Remove the bulb by pulling and change it. To refi t, carry out these operations in reverse order. Changing foglamp bulbs You can also contact a PEUGEOT dealer to have these bulbs changed. Consult a PEUGEOT dealer. Insert a screwdriver towards the centre of the repeater between the repeater and the base of the mirror. Tilt the screwdriver to extract the repeater and remove it. Disconnect the repeater connector. To refi t, carry out these operations in reverse order. Contact a PEUGEOT dealer to obtain replacement repeaters. Changing integrated direction indicator side repeaters Changing direction indicator bulbs Changing dipped beam and main beam headlamp bulbs (models with xenon headlamps) D1S xenon bulbs must be changed by a PEUGEOT dealer as there is a risk of electrocution. It is recommended that the D1S bulbs are changed at the same time when one of them fails. Consult a PEUGEOT dealer.
PRACTICAL INFORMATION180 Rear lamps 1.Brake lamps/sidelamps(P21-5W).2.Reversing lamps (P21W).3.Direction indicators(PY21W-21W).4.Sidelamps (P5-5W).5.Foglamps (P21W). Changing brake lamp/sidelamp, reversing lamp and direction indicator bulbs Press the six tabs and remove the bulb holder. Remove the plastic cover. Remove the two lamp unit fi xing nuts. Extract the lamp unit carefully from the outside. Disconnect the electrical connector. Turn the bulb a quarter of a turn and change it. To refi t, carry out these operations in re-verse order.
PRACTICAL INFORMATION Changing the number plate lamp bulbs (W5-5W) Changing sidelamp bulbs (boot) Changing foglamp bulbs Open the boot. Remove the plastic fl ap using a screwdriver. Remove the lamp fi xing nut. Turn the bulb a quarter of a turn and change it. To refi t, carry out these operations in reverse order. Reach under the bumper. Turn the bulb a quarter of a turn and pull it out. Insert a thin screwdriver into one of the outer holes of the lens. Push it outwards to unclip. Remove the lens. Pull the bulb out and change it. Press the pairs of clips A then Bthen C to detach and gain access to the bulb holder. Changing the third brake lamp bulb Open the boot and remove the up-per seal. Unscrew the two nuts. Press the threaded pins while sup-porting the lamp from the outside. Disconnect the connector and re-move the screenwash pipe.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131