Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Peugeot Connect Sound Trip computer

298108 Each press of the button, located at the end of the wiper stalk, displays the different trip computer information in succession, depending on the screen. - the "vehicle" tab with: � the range, the current fuel consumption and the distance remaining to the destination, - the "1" tab (trip 1) with: � the average speed, the average consumption and the distance travelled calculated over trip "1" , - the "2" tab (trip 2) with the same information for a second trip. A FEW DEFINITIONS Zero reset When the required trip is displayed, press the control for more than two seconds. TRIP COMPUTER Range: displays the distance which can travelled with the remaining fuel detected in the tank, based on the average fuel consumption over the last few miles (kilometres). This displayed value may vary signifi cantly following a change in the vehicle speed or the relief of the route. When the range falls below 20 miles (30 km), dashes are displayed. After fi lling with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km). If, whilst driving, dashes are displayed continuously in place of the digits, contact a PEUGEOT dealer. Current fuel consumption: only calculated and displayed above 20 mph (30 km/h). Average fuel consumption: this is the average fuel consumption since the last trip computer zero reset. Average speed: this is the average speed calculated since the last trip computer zero reset (ignition on). Distance travelled: calculated since the last trip computer zero reset. Distance remaining to the destination: calculated with reference to the fi nal destination, entered by the user. If guidance is activated, the navigation system calculates it as a current value.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131