Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Multifunction Screens Monochrome screen A

39 Displays on the screen This displays the following information: - time, - date, - ambient temperature * (this fl ashes if there is a risk of ice), - status of the openings (doors, boot, ...), - trip computer (refer to the end of the section). Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Boot open") may ap-pear temporarily. Some can be cleared by pressing the "ESC" button. MONOCHROME SCREEN A (WITHOUT AUDIO EQUIPMENT) Controls Main menu There are three display control buttons: - "ESC" to abandon the operation in progress, - "MENU" to scroll through the menus or sub-menus, - "OK" to select the menu or sub-menu required. Press the "MENU" button to scroll through the various menus of the main menu : - vehicle confi guration, - options, - display settings, - languages, - units. Press the "OK" button to select the menu required. * With air conditioning only.
40 Vehicle confi guration Options Once the "Options" menu has been se-lected, you can start diagnostics of the status of the equipment (active, not ac-tive, faulty). Languages Once the "Languages" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Portugues, Portugues-Brasil, Türkçe, Deutsch, English, Espanol). Display settings Once the "Display settings" menu has been selected, you can gain access to the following settings: - year, - month, - day, - hour, - minutes, - 12 or 24 hour mode. Units Once the "Units" menu has been select-ed, you can change the units for: - temperature (°C or °F), - fuel consumption (l/100 km, mpg or km/l). Once you have selected a setting, press the "OK" button to change its value. Wait for approximately ten sec-onds without any action to allow the changed data to be recorded or press the "ESC" button to cancel. The screen then returns to the normal display. Once the "Vehicle confi guration" menu has been selected, you can activate or deactivate the following equipment (ac-cording to country): - wiper linked with reverse gear (refer to the "Visibility" section), - selective unlocking (refer to the "Access" section), - "guide-me-home" and welcome light-ing (refer to the "Visibility" section), - interior mood lighting (refer to the "Visibility" section), - daytime running lamps (refer to the "Visibility" section), - directional headlamps (refer to the "Visibility" section), - automatic or manual parking brake (refer to the "Driving" section), - ... For safety reasons, confi gu-ration of the multifunction screen by the driver must only be done when stationary.
41MONOCHROME SCREEN A (WITH AUDIO EQUIPMENT) Controls Displays on the screen This displays the following information: - time, - date, - ambient temperature * (this fl ashes if there is a risk of ice), - status of the openings (doors, boot, ...), - audio sources (radio, CD, ...), - trip computer (refer to the end of the section). Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Boot open") may ap-pear temporarily. Some can be cleared by pressing the "ESC" button. Main menu Press the "MENU" button for access to the main menu , then press the " " or " " buttons to scroll through the various menus: - radio-CD, - vehicle confi guration, - options, - display settings, - languages, - units. Press the "OK" button to select the menu required. From the audio equipment control panel, you can: press the "MENU" button to gain access to the main menu , press the " " or " " buttons to scroll through the items on the screen, press the "MODE" button to change the permanent application (trip com-puter, audio source, ...), press the " " or " " buttons to change a setting value, press the "OK" button to confi rm, or press the "ESC" button to abandon the operation in progress. Radio-CD With the audio equipment switched on, once the "Radio-CD" menu has been selected you can activate or deactivate the functions linked with use of the radio (RDS, REG), the CD or the CD changer (introscan, shuffl e, CD repeat). * With air conditioning only. For more information on the "Radio-CD" application, refer to the "Audio and Telematics" section.
42 For safety reasons, confi gu-ration of the multifunction screen by the driver must only be done when stationary. Display settings Once the "Display settings" menu has been selected, you can gain access to the following settings: - year, - month, - day, - hour, - minutes, - 12 or 24 hour mode. Languages Once the "Languages" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Portugues, Portugues-Brasil, Türkçe, Deutsch, English, Espanol). Units Once the "Units" menu has been se-lected, you can change the units of the following parameters: - temperature (°C or °F), - fuel consumption (l/100 km, mpg or km/l). Once you have selected a setting, press the " " or " " buttons to change its value. Press the " " or " " buttons to switch respectively to the previous or next setting. Press the "OK" button to record the change and return to the normal display or press the "ESC" button to cancel. Vehicle confi guration Once the "Vehicle Confi guration" menu has been selected, you can activate or deactivate the following equipment (according to country): - wiper linked with reverse gear (refer to the "Visibility" section), - selective unlocking (refer to the "Access" section), - guide-me-home and welcome light-ing (refer to the "Visibility" section), - interior mood lighting (refer to the "Visibility" section), - daytime running lamps (refer to the "Visibility" section), - directional headlamps (refer to the "Visibility" section), - automatic or manual parking brake (refer to the "Driving" section), - ... Options Once the "Options" menu has been select-ed, you can start diagnostics of the status of the equipment (active, not active, faulty).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131