Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Instruments and Controls Service indicator

Service indicator System which informs the driver when the next service is due, in accordance with the manufacturer's servicing schedule. The point at which the service is due is calculated from the last indicator zero reset. It is determined by two para-meters: - the distance travelled, - the time elapsed since the last service. Between 600 miles (1 000 km) and 1 800 miles (3 000 km) remain before the next service is due For 5 seconds after the ignition is switched on, the spanner symbolising the service operations comes on. The distance recorder display line indicates the distance remaining before the next service is due. Example: 1 700 miles (2 800 km) re-main before the next service is due. For 5 seconds after the ignition is switched on, the screen indicates: 5 seconds after the ignition is switched on, the spanner goes off ; the distance recorder resumes its normal operation. The screen then indicates the total and trip distances. Less than 600 miles (1 000 km) remain before the next service is due Example: 400 miles (900 km) remain before the next service is due. For 5 seconds after the ignition is switched on, the screen indicates: 5 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner re-mains on to indicate that a service must be carried out soon. More than 1 800 miles (3 000 km) remain before the next service is due When the ignition is switched on, no ser-vice information appears in the screen.
36 Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least fi ve minutes for the zero reset to be taken into account. Service indicator zero reset After each service, the service indicator must be reset to zero. The procedure for resetting to zero is as follows: switch off the ignition, press and hold the trip distance re-corder zero reset button, switch on the ignition; the distance recorder display begins a count-down, when the display indicates "=0" , release the button; the spanner disappears. The distance remaining may be weighted by the time factor, depending on the driving condi-tions. Therefore, the spanner may also come on if you have exceeded the two year service interval. Service overdue For 5 seconds after the ignition is switched on, the spanner fl ashes to indicate that the service must be carried out as soon as possible. Example: the service is overdue by180 miles (300 km). For 5 seconds after the ignition is switched on, the screen indicates: 5 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner re-mains on . Retrieving the service information You can access the service information at any time. Press the trip distance recorder zero reset button. The service information is displayed for a few seconds, then disappears.
37 The level shown will only be correct if the vehicle is on level ground and the engine has been off for more than 30 minutes. Engine oil level indicator System which informs the driver whether the engine oil level is correct or not. This information is indicated for a few seconds when the ignition is switched on, after the service information. Oil level correct Oil level low Oil level indicator fault Dipstick This is indicated by the fl ashing of "OIL" , linked with the service warning lamp, accompanied by an audible sig-nal and a message in the multifunction screen. If the low oil level is confi rmed by a check using the dipstick, the level must be topped up to prevent damage to the engine. This is indicated by the fl ashing of "OIL --" . Consult a PEUGEOT dealer. Refer to the "Checks" section to locate the dipstick and the oil fi ller cap on your engine. There are 2 marks on the dipstick: - A = max; never exceed this level (risk of dam-age to the engine), - B = min; top up the level via the oil fi ller cap, using the grade of oil suited to your engine.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131