Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Instruments and Controls Indicator and warning lamps

26 Vehicle parameters This menu allows you to activate or deactivate certain driving and comfort equipment (according to country): - wiper linked with reverse gear (refer to the "Visibility" section), - selective unlocking (refer to the "Ac-cess" section), - guide-me-home and welcome light-ing (refer to the "Visibility" section), - interior mood lighting (refer to the "Visibility" section), - daytime running lamps (refer to the "Visibility" section), - directional headlamps (refer to the "Visibility" section), - automatic or manual parking brake (refer to the "Driving" section). Choice of units This menu allows you to select the units: temperature (°Celsius or °Fahr-enheit) and fuel consumption (l/100 km, mpg or km/l). Choice of language This menu allows you to select the display language: Deutsch, English, Espanol, Français, Italiano, Nederlands, Portugues, Türkçe * . The main menu and its asso-ciated functions can only be accessed when stationary, via buttons 1 to 4 . A message appears on the screen, above a certain speed threshold, in-dicating that the main menu cannot be displayed. The trip computer displays can only be accessed while driving, via but-tons 2 and 3 (refer to the "Trip com-puter" paragraph). Main menu Press button 1 for access to the main menu and select one of the following functions: - "Vehicle parameters", - "Choice of language", - "Choice of units". Press button 2 or 3 to move in the screen. Press button 1 again to confi rm the selection. * According to country. Indicator and warning lamps Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault (warning lamp). When the ignition is switched on Certain warning lamps come on for a few seconds when the vehicle's ignition is switched on. When the engine is started, these same warning lamps should switch off. If they remain on, before moving off, refer to the information on the warning lamp concerned. Associated warnings The switching on of certain warning lamps may be accompanied by an audible signal and a message on the multifunction screen. The warning lamps may come on continuously (fi xed) or fl ash. Certain warning lamps may come on in two different modes. Only by relating the type of lighting to the operating status of the vehicle can it be ascertained wheth-er the situation is normal or whether a fault has occurred.
26 Vehicle parameters This menu allows you to activate or deactivate certain driving and comfort equipment (according to country): - wiper linked with reverse gear (refer to the "Visibility" section), - selective unlocking (refer to the "Ac-cess" section), - guide-me-home and welcome light-ing (refer to the "Visibility" section), - interior mood lighting (refer to the "Visibility" section), - daytime running lamps (refer to the "Visibility" section), - directional headlamps (refer to the "Visibility" section), - automatic or manual parking brake (refer to the "Driving" section). Choice of units This menu allows you to select the units: temperature (°Celsius or °Fahr-enheit) and fuel consumption (l/100 km, mpg or km/l). Choice of language This menu allows you to select the display language: Deutsch, English, Espanol, Français, Italiano, Nederlands, Portugues, Türkçe * . The main menu and its asso-ciated functions can only be accessed when stationary, via buttons 1 to 4 . A message appears on the screen, above a certain speed threshold, in-dicating that the main menu cannot be displayed. The trip computer displays can only be accessed while driving, via but-tons 2 and 3 (refer to the "Trip com-puter" paragraph). Main menu Press button 1 for access to the main menu and select one of the following functions: - "Vehicle parameters", - "Choice of language", - "Choice of units". Press button 2 or 3 to move in the screen. Press button 1 again to confi rm the selection. * According to country. Indicator and warning lamps Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault (warning lamp). When the ignition is switched on Certain warning lamps come on for a few seconds when the vehicle's ignition is switched on. When the engine is started, these same warning lamps should switch off. If they remain on, before moving off, refer to the information on the warning lamp concerned. Associated warnings The switching on of certain warning lamps may be accompanied by an audible signal and a message on the multifunction screen. The warning lamps may come on continuously (fi xed) or fl ash. Certain warning lamps may come on in two different modes. Only by relating the type of lighting to the operating status of the vehicle can it be ascertained wheth-er the situation is normal or whether a fault has occurred.
27 Operation indicator lamps If one of the following indicator lamps comes on, this confi rms that the corresponding system has come into operation. Warning lampis onCauseAction/ObservationsLeft-hand direction indicator fl ashing with buzzer. The lighting stalk is pushed down. Right-hand direction indicator fl ashing with buzzer. The lighting stalk is pushed up. Sidelamps fi xed. The lighting stalk is in the "Sidelamps" position. Dipped beam headlamps fi xed. The lighting stalk is in the "Dipped beam headlamps" position. Main beam headlamps fi xed. The lighting stalk is pulled towards you. Pull the stalk to return to dipped beam headlamps. Front foglamps fi xed. The front foglamps are switched on. Turn the ring on the stalk rearwards twice to switch off the front foglamps. Rear foglamps fi xed. The rear foglamps are switched on. Turn the ring on the stalk rearwards to switch off the rear foglamps.
28Warning lampis onCauseAction/ObservationsDiesel engine pre-heating fi xed. The ignition switch is at the 2nd position (ignition on). Wait until the warning lamp has switched off before starting. The duration for which the warning lamp is on is determined by the climatic conditions. Electric parking brake fi xed. The electric parking brake is applied. Release the electric parking brake to switch off the warning lamp: with your foot on the brake pedal, pull the electric brake control. Observe the safety recommendations. For further information about the electric parking brake, refer to the "Driving" section. Deactivation of the automatic functions of the electric parking brake fi xed. The "automatic application" (on switching off the engine) and "automatic release" functions are deactivated or faulty. Activate the function (according to country) via the vehicle confi guration menu or contact a PEUGEOT dealer. Foot on the brake pedal fi xed. The brake pedal must be pressed. Press the brake pedal to start the engine with the 6-speed electronic gear control gearbox (lever in position N ) or automatic gearbox (lever in position P ). If you wish to release the parking brake without pressing the brake pedal, this warning lamp will remain on. fl ashing. In the case of an electronic gear control gearbox, if you hold the vehicle on an incline using the accelerator for too long, the clutch overheats. Use the brake pedal and/or the electric parking brake.
29 Deactivation indicator lamps If one of the following indicator lamps comes on, this confi rms that the corresponding system has been switched off intentionally. This is may be accompanied by an audible signal and a message on the multifunction screen. Warning lampis onCauseAction/ObservationsPassenger's airbag system fi xed. The control, located in the glove box, is set to the OFFposition. The passenger's front airbag is deactivated. In this case you can install a "rear facing" child seat. Set the control to the ON position to activate the passenger's front airbag. In this case, do not fi t a child seat in the rear-facing position. The passenger's airbag system is put into service automatically when the vehicle is started ( ON position). ESP/ASR fi xed. The button (located at the bottom left of the dashboard) or the Grip control dial is operated. Its indicator lamp comes on. ESP/ASR is deactivated. ESP: electronic stability programme. ASR: anti-skid regulation. Press the button to activate the ESP/ASR or turn the Grip control dial to ESP. Its indicator lamp switches off. From approximately 30 mph (50 km/h), the system is reactivated automatically. The ESP/ASR system is activated automatically when the vehicle is started.
30 Warning lamps When the engine is running or the vehicle is being driven, the switching on of one of the following warning lamps indicates a fault which requires action on the part of the driver. Any fault resulting in the switching on of a warning lamp must be investigated further by reading the associated message on the multifunction screen. If you encounter any problems, do not hesitate to contact a PEUGEOT dealer. Warning lampis onCauseAction/ObservationsSTOP fi xed, alone or associated with another warning lamp, accompanied by an audible signal and a message on the screen. Illumination of this warning lamp is associated with a serious braking system, power steering, engine lubrication or cooling system fault or a punctured tyre. Stop as soon as it is safe to do so as there is a risk that the engine will cut out while driving. Park, switch off the ignition and call a PEUGEOT dealer. Service temporarily. A minor fault has occurred for which there is no specifi c warning lamp. Identify the fault by reading the message shown in the screen, such as, for example: - the closing of the doors, boot or bonnet, - the engine oil level, - the screenwash level, - the remote control battery, - the tyre pressures, - saturation of the particle emission fi lter (Diesel). For any other faults, contact a PEUGEOT dealer. fi xed. A major fault has occurred for which there is no specifi c warning lamp. Identify the fault by reading the message shown on the screen and contact a PEUGEOT dealer. (PEF: particle emissions fi lter, Diesel) fi xed, associated temporarily with a message on the risk of blockage of the PEF. This indicates the start of sat-uration of the particle emis-sions fi lter. As soon as traffi c conditions allow, regenerate the fi lter by driving at a speed of at least 35 mph (60 km/h) until the service warning lamp goes off. fi xed. This indicates the low level in the Diesel additive reservoir. Have the level topped up by a PEUGEOT dealer as soon as possible.
Warning lampis onCauseAction/ObservationsElectric parking brake fl ashing. The application or release of the electric parking brake was interrupted. You must stop as soon as it is safe to do so. Park on level ground, switch off the ignition and contact a PEUGEOT dealer or a qualifi ed workshop. + Electric parking brake fault fi xed. The electric parking brake has a fault. Automatic application/release is no longer possible. Contact a PEUGEOT dealer or a qualifi ed workshop without delay. The parking brake can be released manually using the emergency release procedure. For more information on the electric parking brake, refer to the "Driving" section. Braking fi xed. The braking system fl uid level has dropped signifi cantly. Stop as soon as it is safe to do so. Top up with brake fl uid recommended by PEUGEOT. If the problem persists, have the system checked by a PEUGEOT dealer. + fi xed, associated with the electric parking brake fault warning lamp, if the parking brake is released. The braking system has a fault. Stop as soon as it is safe to do so. Park, switch off the ignition and contact a PEUGEOT dealer. + fi xed, associated with the ABS warning lamp. The electronic brake force distribution (EBFD) system has a fault. Stop as soon as it is safe to do so. Have it checked by a PEUGEOT dealer. Anti-lock Braking System (ABS) fi xed. The anti-lock braking system has a fault. The vehicle retains conventional braking. Drive carefully at reduced speed and contact a PEUGEOT dealer without delay.
32Warning lampis onCauseAction/ObservationsEngine autodiagnosis system fi xed. The emission control system has a fault. This lamp should switch off when the engine is started. If it does not switch off, contact a PEUGEOT dealer urgently. fl ashing. The engine management system has a fault. Risk of destruction of the catalytic convertor. Have it checked by a PEUGEOT dealer. Low fuel level fi xed with the needle in the red zone. When it fi rst comes on there remains approximately 6 litres of fuel in the tank. At this point, you begin to use the fuel reserve. Refuel as soon as possible to avoid running out of fuel. This warning lamp will come on every time the ignition is switched on, until a suffi cient addition of fuel is made. Fuel tank capacity: approximately 60 litres . Never continue to drive until you run out of fuel, as this could damage the emission control and injection systems. Maximum coolant temperature fi xed with the needle in the red zone. The temperature of the cooling system is too high. Stop as soon as it is safe to do so. Wait until the engine has cooled down before topping up the level, if necessary. If the problem persists, contact a PEUGEOT dealer. Engine oil pressure fi xed. There is a fault with the engine lubrication system. Stop as soon it is safe to do so. Park, switch off the ignition and contact a PEUGEOT dealer. Dynamic stability control (ESP/ASR) fl ashing. The ESP/ASR regulation is active. The system optimises traction and improves the directional stability of the vehicle. fi xed. Unless it has been deactivated with the indicator lamp on the button on, the ESP/ASR system is faulty. Have it checked by a PEUGEOT dealer.
33Warning lampis onCauseAction/ObservationsBattery charge fi xed. The battery charging circuit has a fault (dirty or loose terminals, slack or cut alternator belt, ...). The warning lamp should go off when the engine is started. If it does not switch off, contact a PEUGEOT dealer. Door(s) open fi xed if the speed is below 6 mph (10 km/h). A door, the boot, the lower tailgate or the bonnet (with alarm only) is still open. Close the door or boot. fi xed and accompanied by an audible signal if the speed is above 6 mph (10 km/h). Seat belt not fastened/unfastened fi xed then fl ashing accompanied by an increasing audible signal. The driver and/or the front passenger has not fastened or has unfastened their seat belt. Pull the strap then insert the tongue in the buckle. Airbags temporarily. This lamp comes on for a few seconds when you turn on the ignition, then switches off. This lamp should switch off when the engine is started. If it does not switch off, contact a PEUGEOT dealer. fi xed. One of the airbag or seat belt pretensioner systems has a fault. Have it checked by a PEUGEOT dealer. Water in Diesel fi xed. The diesel fi lter contains water. Risk of damage to the injection system on Diesel engines. Contact a PEUGEOT dealer without delay.
34Coolant temperature indicator With the engine running, when the needle is: - in zone A , the temperature is correct, - in zone B , the temperature is too high; the max temperature warning lamp 1 and the central STOP warn-ing lamp come on, accompanied by an audible signal and a message in the multifunction screen. After driving for a few minutes, the tem-perature and pressure in the cooling system increase. To top up the level: wait for the engine to cool, unscrew the cap by two turns to allow the pressure to drop, when the pressure has dropped, remove the cap, top up the level to the "MAX" mark. You must stop as soon as it is safe to do so. Wait a few minutes before switching off the engine. Consult a PEUGEOT dealer. Warning lampis onCauseAction/ObservationsDirectional headlamps fl ashing. The directional headlamps system is faulty. Have it checked by a PEUGEOT dealer. Under-infl ated tyre fi xed. The pressure in one or more wheels is too low. Check the pressure of the tyres as soon as possible. This check should preferably be carried out when the tyres are cold.
34Coolant temperature indicator With the engine running, when the needle is: - in zone A , the temperature is correct, - in zone B , the temperature is too high; the max temperature warning lamp 1 and the central STOP warn-ing lamp come on, accompanied by an audible signal and a message in the multifunction screen. After driving for a few minutes, the tem-perature and pressure in the cooling system increase. To top up the level: wait for the engine to cool, unscrew the cap by two turns to allow the pressure to drop, when the pressure has dropped, remove the cap, top up the level to the "MAX" mark. You must stop as soon as it is safe to do so. Wait a few minutes before switching off the engine. Consult a PEUGEOT dealer. Warning lampis onCauseAction/ObservationsDirectional headlamps fl ashing. The directional headlamps system is faulty. Have it checked by a PEUGEOT dealer. Under-infl ated tyre fi xed. The pressure in one or more wheels is too low. Check the pressure of the tyres as soon as possible. This check should preferably be carried out when the tyres are cold.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131