Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Instruments and Controls Engine oil level indicator

37 The level shown will only be correct if the vehicle is on level ground and the engine has been off for more than 30 minutes. Engine oil level indicator System which informs the driver whether the engine oil level is correct or not. This information is indicated for a few seconds when the ignition is switched on, after the service information. Oil level correct Oil level low Oil level indicator fault Dipstick This is indicated by the fl ashing of "OIL" , linked with the service warning lamp, accompanied by an audible sig-nal and a message in the multifunction screen. If the low oil level is confi rmed by a check using the dipstick, the level must be topped up to prevent damage to the engine. This is indicated by the fl ashing of "OIL --" . Consult a PEUGEOT dealer. Refer to the "Checks" section to locate the dipstick and the oil fi ller cap on your engine. There are 2 marks on the dipstick: - A = max; never exceed this level (risk of dam-age to the engine), - B = min; top up the level via the oil fi ller cap, using the grade of oil suited to your engine.
38Total distance recorder System which measures the total dis-tance travelled by the vehicle during its life. Lighting dimmer System for manual adjustment of the brightness of the instrument panel in relation to the exterior brightness. The total and trip distances are displayed for thirty seconds when the ignition is switched off, when the driver's door is opened and when the vehicle is locked or unlocked. Trip distance recorder System which measures a distance travelled during a day or other period since it was reset to zero by the driver. With the ignition on, press the but-ton until zeros appear. Activation When the vehicle lighting is on: press the button to change the brightness of the instrument panel, when the lighting reaches the mini-mum setting, release the button, then press again to increase it, or when the lighting reaches the maxi-mum setting, release the button, then press again to reduce it, when the lighting reaches the level of brightness required, release the button. When the vehicle lighting is on, you cannot switch the in-strument panel lighting off but you can adjust it to minimum. Deactivation When the lighting is off, or in day mode on vehicles fi tted with daytime running lamps, pressing the button does not have any effect.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131