Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Driving Emergency release

136Front left seat moved back fully. In the event of the electric parking brake malfunctioning or the battery running fl at, an emergency manual device can release the parking brake. Emergency release Immobilise the vehicle (or keep it stationary, if the brake pedal is pressed), with the engine running, by engaging fi rst gear (manual gear-box), position P (automatic gearbox) or M or R (6-speed electronic gear control gearbox). Switch off the engine but leave the ignition on. If it is impossible to im-mobilise the vehicle, do not operate the control and contact a PEUGEOT dealer urgently. Fetch the two vehicle blocks and the release device, located under the boot carpet (see "Changing a wheel" in the "Practical information" section). Immobilise the vehicle by placing blocks in front and behind one of the front wheels. Slide the front left-hand seat back as far as possible. Lift up the fl oor plug B in the carpet under the seat. Pierce the protective cover C on the tube D with the release device. Place the release device in the tube D . Turn the release device clockwise.For safety reasons , it is essentialto continue turning the device as far as it will go. The parking brake is re-leased. Remove the release device and store it with the blocks in the tool-box. - The operation of the parking brake reinitialises when the igni-tion is switched off then on again. If the reinitialisation of the parking brake proves impossible, contact a PEUGEOT dealer. - The subsequent time required for application may be longer than dur-ing normal operation. For safety reasons, you must contact a PEUGEOT dealer as soon as possible to replace the protective cover. Following an emergency unlocking, immobilisation of the vehicle is no longer guaranteed once the manual emergency release has been de-ployed and the manual control does not allow the re-application of your parking brake. Take no action, either on the control lever A , or stopping or starting the engine while the release device is engaged. Take care not to allow moisture or dust in the proximity of the protective cover.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131