Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Driving Cruise control

146CRUISE CONTROL System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal. The cruise control is switched onmanually: it requires a minimum vehicle speed of 25 mph (40 km/h) and the en-gaging: - of fourth gear on the manual gearbox, - of second gear on the electronic gear control gearbox or automatic gear-box, in sequential driving mode, - of position A on the electronic gear control gearbox or D on the auto-matic gearbox. The controls of this system are grouped together on stalk A . 1. Cruise control mode selection dial 2. Speed programming/programmed value decrease button 3. Speed programming/programmed value increase button 4. Cruise control off/resume button The programmed information is grouped together on the instrument panel display. 5. Cruise control off/resume indication 6. Cruise control mode selection indi-cation 7. Programmed speed value Steering mounted controls Displays on the instrument panel The cruise control cannot, in any circumstances, replace the need to observe speed limits, nor can it replace the need for vigilance and re-sponsibility on the part of the driver. The cruise control is switched off man-ually or by pressing the brake or clutch pedal or on triggering of the ESP sys-tem for safety reasons. It is possible to exceed the programmed speed temporarily by pressing the ac-celerator pedal. To return to the programmed speed, simply release the accelerator pedal. Switching off the ignition cancels any programmed speed value. This information also appears in the head-up display. For more information on the head-up display, refer to this "Driving" section.
147 When the cruise control is switched on, be careful if you maintain the pressure on one of the programmed speed chang-ing buttons: this may result in a very rapid change in the speed of your ve-hicle. Do not use the cruise control on slip-pery roads or in heavy traffi c. On a steep descent, the cruise con-trol will not be able to prevent the vehicle from exceeding the pro-grammed speed. To avoid any risk of jamming of the pedals: - ensure that the mat is positioned correctly, - never fi t one mat on top of another. Programming Exceeding the programmed speed Intentional or unintentional exceeding of the programmed speed results in fl ashing of this speed on the display. Return to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically can-cels the fl ashing of the speed. Return to normal driving Turn dial 1 to the "0" position: the cruise control mode is deselected. The display returns to the distance recorder. Operating fault In the event of a cruise control malfunc-tion, the speed is cleared resulting in fl ashing of the dashes. Have it checked by a PEUGEOT dealer. Set the programmed speed by ac-celerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)). Switch off the cruise control by pressing button 4 : the display confi rms that it has been switched off (OFF). Switch the cruise control back on by pressing button 4again. You can then change the programmed speed using buttons 2and 3 : - by + or - 1 mph (km/h) = short press, - by + or - 5 mph (km/h) = long press, - in steps of + or - 5 mph (km/h) = maintained press. Turn dial 1 to the "CRUISE" po-sition: the cruise control mode is selected but is not switched on (OFF).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131