Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Driving 6-speed electronic gear control gearbox

1496-SPEED ELECTRONIC GEAR CONTROL GEARBOX Gear lever R. Reverse With your foot on the brake, move the lever upwards to select this posi-tion. N. Neutral. With your foot on the brake, select this position to start. A. Automatic mode. Move the lever downwards to select this mode. M. +/- Sequential mode with manual changing of the gears. Move the lever downwards then to the left to select this mode, then: - push the lever forwards to change up a gear, - or pull the lever rearwards to change down a gear. S. Sport function. Press this button to activate or de-activate this function. Steering mounted controls +. Change up paddle to the right of the steering wheel. Press the back of the "+" steering mounted paddle to change up a gear. -. Change down paddle to the left of the steering wheel. Press the back of the "-" steering mounted paddle to change down a gear. The steering mounted paddles do not permit the selection of neutral or the engaging or dis-engaging of reverse gear. Six-speed electronic gear control gear-box which offers a choice between the comfort of fully automatic operation or the pleasure of manual gear changing. Three driving modes are offered: - automatic mode for automatic con-trol of the gears by the gearbox, - sequential mode for manual chang-ing of the gears by the driver, - auto sequential mode to overtake, for example, remaining in automatic mode while using the functions of the sequential mode. A Sport function is available in auto-matic or sequential mode for a more dy-namic style of driving.
150 Displays in the instrument panel Gear lever positions N. Neutral R. Reverse 1, 2, 3, 4, 5, 6. Gears in sequential mode AUTO. This comes on when the au-tomatic mode is selected. It switches off on changing to se-quential mode. S. Sport (Sport function) Place your foot on the brake when this warning lamp fl ashes (e.g.: when starting the engine). Select position N . Press the brake pedal down fully. Start the engine. Select fi rst gear (position M or A ) or reverse (position R ). Release the parking brake unless it is programmed to automatic mode. Take your foot off the brake pedal, then accelerate. AUTO and 1 or R appear in the instrument panel screen. N fl ashes in the instrument panel, accompanied by an au-dible signal and a message in the multifunction screen, if the gear lever is not in position N on starting. Foot on brake fl ashes in the instru-ment panel, accompanied by an au-dible signal and a message in the multifunction screen, if the brake pedal is not pressed on starting. There is an audible signal when reverse gear is en-gaged. N appears in the instrument panel screen. Sequential mode When the vehicle has moved off, se-lect position M to change to sequen-tial mode. AUTO disappears and the gears engaged appear in suc-cession in the instrument pan-el screen. The gear change requests are only car-ried out if the engine speed permits. It is not necessary to release the accel-erator during gear changes. When braking or slowing down, the gearbox changes down automatically to allow vehicle to pull away in the correct gear. At very low speed, if reverse gear is requested, this will only be taken into account when the vehicle is immobilised. The Foot on brake warning lamp may fl ash in the instrument panel to prompt you to brake. At high speed, if reverse gear is re-quested, the N indicator lamp will fl ash and the gearbox will change to neutral automatically. To engage a gear again, return the lever to posi-tion A or M .
151 The gearbox is then operating in auto-active mode, without any action on the part of the driver. It continuously selects the most suitable gear in relation to the following parameters: - style of driving, - profi le of the road. AUTO and the gear engaged appear in the instrument panel screen. Automatic mode Following use of the sequential mode, select position A to return to the automatic mode. "Auto sequential mode" This mode enables you to overtake, for example, remaining in automatic mode while using the functions of the sequen-tial mode. Operate the + or - steering mounted paddle. The gearbox engages the gear request-ed if the engine speed permits. AUTO is still displayed in the instrument panel. After a few moments without any action on the controls, the gearbox resumes automatic control of the gears. On sharp acceleration, the gearbox will not change up unless the driver acts on the gear lever or the steering mounted paddles. Never select neutral N while the ve-hicle is moving. Only engage reverse gear R when the vehicle is immobilised with the brake pedal pressed. For optimum acceleration, for example when overtaking an-other vehicle, press the accel-erator pedal fi rmly past the point of resistance.
152 Stopping the vehicle Operating fault With the ignition on, if this warning lamp comes on and AUTO fl ashes, accompanied by an audible signal and a message in the multifunction screen, this indicates a fault with the gearbox. Have it checked by a PEUGEOT dealer. It is essential to press the brake pedal when starting the engine. When parking, is it essential to apply the parking brake to immobilise the vehicle, whatever the circumstances. When immobilising the vehi-cle, with the engine running, it is essential to place the gear lever in neutral N . Before carrying out any work in the engine compartment, check that the gear lever is in neutral N and that the parking brake is applied. Sport function Following selection of the sequential mode or automatic mode, press but-ton S to activate the Sport function which offers you a more dynamic style of driving. S appears next to the gear en-gaged in the instrument panel screen. Press button S again to deactivate the function. S is then cleared from the instrument panel screen. The gearbox returns to normal mode automatically each time the ignition is switched off. Before switching off the engine, you can choose to: - move to position N to engage neu-tral, - leave the gear engaged; in this case, it will not be possible to move the vehicle. In both cases, it is essential that you ap-ply the parking brake to immobilise the vehicle.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131