Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Comfort Front seats

61 9. Mono-zone/Dual-zone Press this button to equalise the comfort value on the pas-senger side with that on the driver's side (mono-zone). The indicator lamp in the button comes on. 8. Air recirculation Press this button to recir-culate the interior air. The indicator lamp comes on. Air recirculation enables the passenger compartment to be isolated from exte-rior odours and smoke. As soon as possible, press this button again to allow the intake of exterior air and avoid misting. The indicator lamp in the button goes off. Switching the system off Turn the air fl ow control to the left until all of the indicator lamps go off. This action switches off all of the func-tions of the system. Temperature related comfort is no lon-ger guaranteed but a slight fl ow of air, due to the movement of the vehicle, can still be felt. Turn the air fl ow dial to the right or press the "AUTO" button to reacti-vate the system with the values set before it was switched off. Avoid driving for prolonged periods with the system off.
62FRONT SEATS Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort. Forwards-backwards adjustment Raise the control and slide the seat forwards or backwards. Driver's or passenger's seat height adjustment Pull the control upwards to raise or push it downwards to lower, as many times as necessary, to obtain the position required. Seat back angle adjustment Push the control rearwards. Manual adjustments
63DRIVER'S ELECTRIC SEAT Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort. Forwards-backwards adjustment Push the control forwards or rear-wards to slide the seat. Seat cushion height and angle adjustment Tilt the rear part of the control up-wards or downwards to obtain the required height. Tilt the front part of the control up-wards or downwards to obtain the required angle. Seat back angle adjustment Tilt the control forwards or rearwards to adjust the angle of the seat back. The electrical functions of the driver's seat are active approxi-mately one minute after opening the front door. They are deactivated ap-proximately one minute after the ignition is switched off and in economy mode. To reactivate them, switch on the ignition.
64 Heated seats control With the engine running, the front seats can be heated separately. Use the adjustment dial, placed on the side of each front seat, to switch on and select the level of heating re-quired: 0: Off. 1: Low. 2: Medium. 3: High. Head restraint height and angle adjustment To raise the head restraint, pull it for-wards and upwards at the same time. To remove the head restraint, press the lug A and pull the head restraint upwards. To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back. To lower the head restraint, press the lug A and the head restraint at the same time. To adjust the angle of the head re-straint, tilt its lower part forwards or rearwards. The head restraint is fi tted with a frame with notches which prevents it from lowering; this is a safety device in case of impact. The adjustment is correct when the upper edge of the head restraint is level with the top of the head. Never drive with the head restraints removed; they must be in place and adjusted correctly. Manual lumbar adjustment Turn the knob to obtain the desired level of lumbar support.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131