Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Checks Checking levels

CHECKS163 CHECKING LEVELS Check all of these levels regularly and top them up if necessary, unless other-wise indicated. If a level drops signifi cantly, have the corresponding system checked by a PEUGEOT dealer. Brake fluid level In addition, as the cooling system is pressurised, wait at least one hour after switching off the engine before carrying out any work. To avoid any risk of scalding, unscrew the cap by two turns to allow the pres-sure to drop. When the pressure has dropped, remove the cap and top up the level. Oil level The check is carried out either when the ignition is switched on using the oil level indicator on the instrument panel, or using the dipstick. This manual check will only be correct if the vehicle is on level ground and the engine has been off for more than30 minutes. After topping up the oil, the check when switching on the ignition with the oil level indicator in the instrument panel will only be valid 30 minutes after topping up. The brake fl uid level should be close to the "MAX" mark. If it is not, check the brake pad wear. Changing the fl uid Refer to the Warranty and Maintenance Record for details of the interval for this operation. Power steering fluid level The power steering fl uid level should be close to the "MAX" mark. Unscrew the cap, with the engine cold, to check the level. Screenwash and headlamp wash fluid In the case of vehicles fi tted with headlamp washers, the low fl uid level is indicated by an audible signal and a message in the instrument panel screen. Top up the reservoir when you stop the vehicle. Engine oil change Refer to the Warranty and Maintenance Record for details of the interval for this operation. In order to maintain the reliability of the engine and emission control system, the use of additives in the engine oil is prohibited. Oil specifi cation The oil must correspond to your en-gine and conform to the manufacturer's recommendations. Fluid specifi cation The brake fl uid must conform to the manufacturer's recommendations and fulfi l the DOT4 standards. Changing the coolant The coolant does not have to be changed. Fluid specifi cation For optimum cleaning and to avoid freezing, this fl uid must not be topped up with or replaced with plain water. Coolant level The coolant level should be close to the "MAX" mark but should never exceed it. When the engine is warm, the tempera-ture of the coolant is regulated by the fan. This can operate with the ignition off. On vehicles which are fi tted with a par-ticle emission fi lter, the fan may oper-ate after the vehicle has been switched off, even if the engine is cold. Fluid specifi cation The coolant must conform to the manu-facturer's recommendations. When working under the bon-net, take care, as certain areas of the engine may be extremely hot (risk of burns).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131