Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Access Remote control key

71 Unfolding the key Unlocking the vehicle Press the open padlock to unlock the vehicle. Complete unlocking using the remote control REMOTE CONTROL KEY System which permits central unlock-ing or locking of the vehicle using the lock or from a distance. It is also used to locate and start the vehicle, as well as providing protection against theft. Complete unlocking using the key Turn the key to the left in the driver's door lock to unlock the vehicle. Unlocking is confi rmed by rapid fl ashing of the direction indicators for approxi-mately two seconds. According to version, the door mirrors unfold at the same time. Selective unlocking using the remote control Selective unlocking using the key Turn the key to the left in the driver's door lock once to unlock the driver's door only. Turn the key to the left in the driver's door lock again to unlock the other doors and the boot. Press the open padlock once to unlock the driver's door only. Press the open padlock again to un-lock the other doors and the boot. Each unlocking is confi rmed by rapid fl ashing of the direction indicators for approximately two seconds. According to version, the door mirrors unfold at the same time as the fi rst unlocking action. The selective unlocking is only available on versions fi tted with deadlocking. The complete or selective unlocking parameter is set via the multifunction screen confi guration menu. Complete unlocking is activated by de-fault. First press this button to unfold the key.
72Locating your vehicle Press the closed padlock to locate your locked vehicle in a car park. This is indicated by lighting of the direc-tion indicators for a few seconds. Deadlocking renders the exte-rior and interior door controls inoperative. It also deactivates the manual central control button. Therefore, never leave anyone inside the vehicle when it is deadlocked. Deadlocking using the remote control Deadlocking using the key Folding the key Press the closed padlock to lock the vehicle com-pletely or press the closed padlock for more than two seconds to close the win-dows automatically in ad-dition to locking (according to version). Press the closed padlock again within fi ve seconds to deadlock the vehicle. If one of the doors or the boot is still open, the central locking does not take place. When the vehicle is locked, if it is unlocked inadvertently, it will relock automatically after thirty seconds un-less a door is opened. Normal locking using the key Turn the key to the right in the driver's door lock to lock the vehicle com-pletely. Locking is confi rmed by fi xed lighting of the direction indicators for approximately two seconds. According to version, the door mirrors fold at the same time. The folding and unfolding of the door mirrors using the remote control can be deactivated by a PEUGEOT dealer. Locking the vehicle Press the closed padlock to lock the vehicle com-pletely. Press the closed padlock for more than two seconds to close the win-dows automatically in addition to locking (according to version). Normal locking using the remote control Turn the key to the right in the driver's door lock to lock the vehicle completely and hold it in this posi-tion for more than two seconds to close the windows automatically in addition to locking (according toversion). Turn the key to the right again within fi ve seconds to deadlock the vehicle. Deadlocking is confi rmed by fi xed light-ing of the direction indicators for ap-proximately two seconds. According to version, the door mirrors fold at the same time. First press this button to fold the key.
73 Electronic engine immobiliser The key contains an electronic chip which has a special code. When the ignition is switched on, this code must be recognised in order for starting to be possible. This electronic engine immobiliser locks the engine management system a few minutes after the ignition is switched off and prevents starting of the engine by anyone who does not have the key. Anti-theft protection In the event of a malfunction, you are informed by lighting of this warning lamp, an audible signal and a message on the multifunction screen. In this case, your vehicle does not start; contact a PEUGEOT dealer as soon as possible. For more information, refer to the "Practical information - Energy economy mode" sec-tion. Starting the vehicle Insert the key in the ignition switch. The system recognises the starting code. Turn the key fully towards the dash-board to position 3 (Starting) . When the engine starts, release the key. Switching the vehicle off Immobilise the vehicle. Turn the key fully towards you to po-sition 1 (Stop) . Remove the key from the ignition switch. Energy economy mode After switching off the engine (posi-tion 1-Stop ), you can still use functions such as the audio and telematics sys-tem, the wipers, the dipped headlamps, the courtesy lamps, etc. for a maximum combined period of thirty minutes. A heavy object (key fob...), at-tached to the key and weigh-ing down on its shaft in the ignition switch, could cause a malfunction.
74Remote control problem Following disconnection of the vehicle battery, replacement of the remote con-trol battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. First of all, use the key in the lock to unlock or lock your vehicle. Then, reinitialise the remote control. If the problem persists, contact a PEUGEOT dealer as soon as possible. Changing the battery Battery ref.: CR1620/3 volts. Reinitialisation Switch off the ignition. Turn the key to position 2 (Ignitionon) . Press the closed padlock immedi-ately for a few seconds. Switch off the ignition and remove the key from the ignition switch. The remote control is fully operational again. If the battery is fl at, you are in-formed by illumination of this warning lamp, an audible signal and a message in the multifunc-tion screen. Unclip the casing using a coin at the notch. Slide the fl at battery out of its loca-tion. Slide the new battery into its loca-tion observing the original direction. Clip the casing. Reinitialise the remote control. This replacement battery is available from PEUGEOT dealers.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131