Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Access Electric windows

76ALARM System which protects and provides a deterrent against the theft of your vehi-cle. It provides two types of protection, exterior and interior, as well as an anti-tamper function. Locking the vehicle with full alarm Do not make any modifi ca-tions to the alarm system, this could cause malfunctions. To be effective, this deactivation must be carried out each time the ignition is switched off. Reactivation of the interior volumetric protection Unlock the vehicle using the unlock-ing button on the remote control. Relock the vehicle using the remote control. The alarm is activated again with both types of protection; the indicator lamp on button A switches off. Locking the vehicle with exterior protection alarm only Activation Switch off the ignition and get out of the vehicle. Lock or deadlock the vehicle using the locking button on the remote control. The alarm is activated; the indicator lamp on button A fl ashes once per second. Exterior perimiter protection The system detects opening of the vehicle. The alarm is triggered if anyone tries to enter the vehicle by forcing a door, the boot or the bonnet. Interior volumetric protection The system detects any variation in the volume in the passenger compartment. The alarm is triggered if anyone breaks a window or moves inside the vehicle. If you wish to leave a pet in the vehicle or a window partially open, deactivate the interior volumetric protection. Anti-tamper function The system detects the putting out of service of its components. The alarm is triggered if anyone tries to put the wires of the siren, the central control or the battery out of service. Deactivation Unlock the vehicle using the unlock-ing button on the remote control. The alarm is deactivated; the indicator lamp on button A switches off. Deactivation of the interior volumetric protection Switch off the ignition. Within ten seconds, press button Auntil the indicator lamp is lit continu-ously. Get out of the vehicle. Lock or deadlock the vehicle using the locking button on the remote control. The exterior protection alarm alone re-mains activated; the indicator lamp on button A fl ashes once per second.
77 Triggering This is indicated by sounding of the siren and fl ashing of the direction indicators for approximately thirty seconds. After it has been triggered, the alarm is again operational. If the alarm is triggered ten times in succession, the elev-enth time will result in it be-coming inactive. If the indicator lamp on button Afl ashes rapidly, this indicates that the alarm was triggered during your ab-sence. When the ignition is switched on, this fl ashing stops immediately. To avoid triggering the alarm when washing your vehicle, lock it using the key in the driver's door lock. Do not activate the alarm before dis-connecting the battery, otherwise the siren will sound. Failure of the remote control Unlock the vehicle using the key in the driver's door lock. Open the door; the alarm is trig-gered. Switch on the ignition; the alarm stops. Malfunction When the ignition is switched on, light-ing of the indicator lamp on button A for ten seconds indicates a siren fault. Have it checked by a PEUGEOT dealer. Locking the vehicle without activating the alarm Lock or deadlock the vehicle using the key in the driver's door lock. Automatic operation * Depending on the legislation in force in your country, one of these cases may occur: - 45 seconds after the vehicle is locked using the remote control, the alarm is activated, regardless of the status of the doors and boot. - 2 minutes after the last door or the boot is closed, the alarm is activated. To avoid triggering the alarm on entering the vehicle, fi rst press the unlocking button on the remote control. * According to country.
78 The electric window controls remain operational for ap-proximately 45 seconds after the ignition is switched off or until the vehicle is locked after a front door is opened. If one of the passenger windows can-not be operated from the driver's door control pad, carry out the operation from the control pad of the passen-ger door concerned, and vice versa. ELECTRIC WINDOWS System intended to open or close a win-dow manually or automatically. Fitted with a safety anti-pinch system and a system for deactivation in the event of misuse of the rear controls. 1.Driver's electric window control.2.Passenger's electric window control.3.Rear right electric window control.4.Rear left electric window control.5.Deactivation of the rear electric window and door controls. If the window cannot be closed (for example, in the presence of ice), immediately after the movement is reversed: press and hold the control until the window opens fully, then pull the control immediately and hold it until the window closes, continue to hold the control for approximately one second after the window has closed. The safety anti-pinch function is not operational during these operations. Safety anti-pinch When the window rises and meets an obstacle, it stops and partially lowers again. - automatic mode Press or pull the control fi rmly. The window opens or closes fully when the control is released. Pressing the control again stops the movement of the window. One-touch electric windows There are two options: - manual mode Press or pull the control gently. The window stops when the con-trol is released. After approximately ten con-secutive complete opening/closing movements of the win-dow, a protection function is activated to prevent damage to the electric win-dow motor. After this, you have approximately one minute within which to close the window. Once the window is closed, the con-trols will become available again af-ter approximately 40 minutes.
79 Indicator lamp on, the rear controls are deactivated. Indicator lamp off, the rear controls are activated. This control also deactivates the interior controls for the rear doors (refer to the section "Child safety - § Electric child lock"). Reinitialisation If a window does not rise automatically, its operation must be reinitialised: pull the control until the window stops, release the control and pull it again, repeat these operations until the window closes fully, continue to hold the control for ap-proximately one second after the window has closed, press the control to lower the window automatically to the low position, when the window has reached the low position, press the control again for approximately one second. Any other status of the indica-tor lamp indicates a malfunc-tion of the electric child lock. Have it checked by a PEUGEOT dealer. Always remove the key from the igni-tion when leaving the vehicle, even for a short time. If an obstacle is encountered during operation of the electric windows, you must reverse the movement of the window. To do this, press the control concerned. When the driver operates the controls for the passengers' electric windows, they must ensure that no one is pre-venting correct closing of the win-dows. The driver must ensure that the pas-sengers use the electric windows correctly. Be aware of children when operating the windows. Deactivation of the rear electric window and door controls For the safety of your children, with the ignition on, press control 5 to deactivate the rear electric window controls regardless of their position. It is still possible to open the doors from the outside and operate the rear electric windows from the driver's control pad. The safety anti-pinch function is not operational during these operations.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131