Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2008-2015 Access Alarm

75Lost keys Visit a PEUGEOT dealer with the vehicle's V5 registration document and your personal identifi cation documents. The PEUGEOT dealer will be able to retrieve the key code and the transponder code required to order a replacement key. Do not throw the remote con-trol batteries away, they contain metals which are harmful to the environment. Take them to an approved collection point. Remote control The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it. Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from working and the remote control would have to be reinitialised. The remote control does not operate when the key is in the ignition, even when the ignition is switched off, except for reinitialisation. Locking the vehicle Driving with the doors locked may make access to the passenger compartment by the emergency services more diffi cult in an emergency. As a safety precaution (with children on board), remove the key from the ignition when you leave the vehicle, even for a short time. Anti-theft protection Do not make any modifi cations to the electronic engine immobiliser system; this could cause malfunctions. When purchasing a second-hand vehicle Have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones which can start the vehicle.
73 Electronic engine immobiliser The key contains an electronic chip which has a special code. When the ignition is switched on, this code must be recognised in order for starting to be possible. This electronic engine immobiliser locks the engine management system a few minutes after the ignition is switched off and prevents starting of the engine by anyone who does not have the key. Anti-theft protection In the event of a malfunction, you are informed by lighting of this warning lamp, an audible signal and a message on the multifunction screen. In this case, your vehicle does not start; contact a PEUGEOT dealer as soon as possible. For more information, refer to the "Practical information - Energy economy mode" sec-tion. Starting the vehicle Insert the key in the ignition switch. The system recognises the starting code. Turn the key fully towards the dash-board to position 3 (Starting) . When the engine starts, release the key. Switching the vehicle off Immobilise the vehicle. Turn the key fully towards you to po-sition 1 (Stop) . Remove the key from the ignition switch. Energy economy mode After switching off the engine (posi-tion 1-Stop ), you can still use functions such as the audio and telematics sys-tem, the wipers, the dipped headlamps, the courtesy lamps, etc. for a maximum combined period of thirty minutes. A heavy object (key fob...), at-tached to the key and weigh-ing down on its shaft in the ignition switch, could cause a malfunction.
76ALARM System which protects and provides a deterrent against the theft of your vehi-cle. It provides two types of protection, exterior and interior, as well as an anti-tamper function. Locking the vehicle with full alarm Do not make any modifi ca-tions to the alarm system, this could cause malfunctions. To be effective, this deactivation must be carried out each time the ignition is switched off. Reactivation of the interior volumetric protection Unlock the vehicle using the unlock-ing button on the remote control. Relock the vehicle using the remote control. The alarm is activated again with both types of protection; the indicator lamp on button A switches off. Locking the vehicle with exterior protection alarm only Activation Switch off the ignition and get out of the vehicle. Lock or deadlock the vehicle using the locking button on the remote control. The alarm is activated; the indicator lamp on button A fl ashes once per second. Exterior perimiter protection The system detects opening of the vehicle. The alarm is triggered if anyone tries to enter the vehicle by forcing a door, the boot or the bonnet. Interior volumetric protection The system detects any variation in the volume in the passenger compartment. The alarm is triggered if anyone breaks a window or moves inside the vehicle. If you wish to leave a pet in the vehicle or a window partially open, deactivate the interior volumetric protection. Anti-tamper function The system detects the putting out of service of its components. The alarm is triggered if anyone tries to put the wires of the siren, the central control or the battery out of service. Deactivation Unlock the vehicle using the unlock-ing button on the remote control. The alarm is deactivated; the indicator lamp on button A switches off. Deactivation of the interior volumetric protection Switch off the ignition. Within ten seconds, press button Auntil the indicator lamp is lit continu-ously. Get out of the vehicle. Lock or deadlock the vehicle using the locking button on the remote control. The exterior protection alarm alone re-mains activated; the indicator lamp on button A fl ashes once per second.
77 Triggering This is indicated by sounding of the siren and fl ashing of the direction indicators for approximately thirty seconds. After it has been triggered, the alarm is again operational. If the alarm is triggered ten times in succession, the elev-enth time will result in it be-coming inactive. If the indicator lamp on button Afl ashes rapidly, this indicates that the alarm was triggered during your ab-sence. When the ignition is switched on, this fl ashing stops immediately. To avoid triggering the alarm when washing your vehicle, lock it using the key in the driver's door lock. Do not activate the alarm before dis-connecting the battery, otherwise the siren will sound. Failure of the remote control Unlock the vehicle using the key in the driver's door lock. Open the door; the alarm is trig-gered. Switch on the ignition; the alarm stops. Malfunction When the ignition is switched on, light-ing of the indicator lamp on button A for ten seconds indicates a siren fault. Have it checked by a PEUGEOT dealer. Locking the vehicle without activating the alarm Lock or deadlock the vehicle using the key in the driver's door lock. Automatic operation * Depending on the legislation in force in your country, one of these cases may occur: - 45 seconds after the vehicle is locked using the remote control, the alarm is activated, regardless of the status of the doors and boot. - 2 minutes after the last door or the boot is closed, the alarm is activated. To avoid triggering the alarm on entering the vehicle, fi rst press the unlocking button on the remote control. * According to country.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131