Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Safety ISOFIX child seats

78SafetyAn incorrectly installed child seat in a vehicle compromises the child's safety in the event of an accident.Strictly observe the fitting instructions provided in the user guide supplied with the child seat.For information about the options for fitting ISOFIX child seats in your vehicle, refer to the summary table.Recommended ISOFIX child seatsAlso consult the user guide from the child seat’s manufacturer to find out how to install and remove the seat."RÖMER Baby-Safe and its ISOFIX base"(size category: E)Group 0+: from birth to 13 kg(c)Refer to the current legislation in your country before placing a child in this seat position.(d)The front height-adjustable seat must be adjusted to the highest and fully back longitudinal position.(e)The backrest must be in an upright position.(f)To install a "rearward facing" or "forward facing" child seat at the rear, move the front seat forward, then adjust the backrest to an upright position to allow enough room for the child seat and the child's legs.(g)Never install a child seat with a support leg on the centre rear passenger seat."ISOFIX" mountingsThe seats shown below are fitted with ISOFIX compliant mountings:* Depending on version.The mountings comprise three rings for each seat, indicated by a marking:–Two ringsA, located between the vehicle seat backrest and cushion.The 2latches onISOFIX child seats are secured to them.–One ringB, located behind the seat, called the TOP TETHER, for attaching seats fitted with an upper strap.Front seatRear seatsThis system prevents the child seat from tipping forwards in the event of a front impact.This ISOFIX mounting system provides fast, reliable and safe fitting of the child seat in the vehicle.To secure the child seat to the TOP TETHER:►Remove and stow the head restraint before installing the child seat on this seat (refit it once the child seat has been removed).►Pass the strap of the child seat behind the seat backrest, centring it between the openings for the head restraint rods.►Secure the upper strap hook to ringB.►Tighten the upper strap.When fitting an ISOFIX child seat to the left-hand rear seat of the bench seat, before fitting the seat, first move the centre rear seat belt towards the middle of the vehicle, so as to avoid the seat interfering with the operation of the seat belt.
79Safety5An incorrectly installed child seat in a vehicle compromises the child's safety in the event of an accident.Strictly observe the fitting instructions provided in the user guide supplied with the child seat.For information about the options for fitting ISOFIX child seats in your vehicle, refer to the summary table.Recommended ISOFIX child seatsAlso consult the user guide from the child seat’s manufacturer to find out how to install and remove the seat."RÖMER Baby-Safe and its ISOFIX base"(size category: E)Group 0+: from birth to 13 kg"RÖMER Baby-Safe and its ISOFIX base"(size category: E)Group 0+: from birth to 13 kgInstalled "rearward facing" using an ISOFIX base which is attached to ringsA.The base has a support leg, height-adjustable, which rests on the vehicle's floor.This child seat can also be secured with a seat belt. In this case, only the shell is used and attached to the vehicle seat using the three-point seat belt."RÖMER Duo Plus ISOFIX"(size category: B1)Group 1: from 9 to 18 kg"RÖMER Duo Plus ISOFIX"(size category: B1)Group 1: from 9 to 18 kgSuitable for forward-facing installation only.Attached to ringsA and ringB, referred to as TOP TETHER, using an upper strap.Three seat body angles: sitting, reclining, lying down.This child seat can also be used in seat positions not equipped with ISOFIX mountings. In this case, it must be secured to the vehicle's seat by the three-point seat belt. Adjust the front seat of the vehicle so that the child's feet do not touch the backrest.
80SafetyIL:Seat position suitable for the installation of an Isofix Semi-Universal seat, either:–"rearward facing" fitted with an upper strap or a support leg.–"forward facing" fitted with a support leg.–a carrycot fitted with an upper strap or a support leg.For securing the upper strap using the ISOFIX mountings, refer to the corresponding section.X: Seat position not suitable for the installation of an ISOFIX seat or carrycot for the specified weight group.(a) Refer to the current legislation in your country before placing a child in this seat position.(b)Remove the head restraints.(c)Behind the driver: adjust the driver’s seat to its maximum height setting.(d)Behind the front passenger: adjust the front passenger seat to its fully forward longitudinal position.i-Size child seatsi-Size child seats have two latches that are anchored to the two rings A.These i-Size child seats also have:–either an upper strap that is attached to ring B.–or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position.Their role is to prevent the child seat from tipping forward in the event of a collision.For more information on the ISOFIX mountings, refer to the corresponding section.In accordance with European regulations, this table indicates the options for installing i-Size child seats on seats in the vehicle fitted with ISOFIX mountings approved for i-Size.SeatFront passenger airbagi-Size restraint systemRow 1 (a)(depending on version)Passenger seat with ISOFIX, with or without height adjustment (b)Deactivated: "OFF"i-UActivated: "ON"i-UFPassenger seat without ISOFIXNot i-SizeLocations for ISOFIX child seatsIn line with European regulations, this table indicates the options for installing ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings.In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child seat next to the ISOFIX logo.Weight of the child/indicative ageUnder 10kg(group 0)Up to about 6 months oldUnder 10kgUnder 13kg (group 0)(group 0+)Up to about 1 year oldFrom 9 to 18kg(group 1)From about 1 to 3 years oldType of ISOFIX child seatCot"Rearward facing""Rearward facing""Forward facing"ISOFIX size categoryFGCDECDABB1SeatFront passenger airbagRow 1 (a) (b)(depending on version)Passenger seat with ISOFIXwith or without height adjustmentDeactivated: "OFF"XILILIUF/ILActivated: "ON"XXXIUF/ILPassenger seat without ISOFIXNot ISOFIXRow 2 (b)Rear side seats (c) (d)XILILIUF/ILRear centre seatNot ISOFIXIUF: Seat position suitable for the installation of an Isofix Universal seat, "Forward facing", secured using the upper strap.
81Safety5IL:Seat position suitable for the installation of an Isofix Semi-Universal seat, either:–"rearward facing" fitted with an upper strap or a support leg.–"forward facing" fitted with a support leg.–a carrycot fitted with an upper strap or a support leg.For securing the upper strap using the ISOFIX mountings, refer to the corresponding section.X: Seat position not suitable for the installation of an ISOFIX seat or carrycot for the specified weight group.(a) Refer to the current legislation in your country before placing a child in this seat position.(b)Remove the head restraints.(c)Behind the driver: adjust the driver’s seat to its maximum height setting.(d)Behind the front passenger: adjust the front passenger seat to its fully forward longitudinal position.i-Size child seatsi-Size child seats have two latches that are anchored to the two rings A.These i-Size child seats also have:–either an upper strap that is attached to ring B.–or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position.Their role is to prevent the child seat from tipping forward in the event of a collision.For more information on the ISOFIX mountings, refer to the corresponding section.In accordance with European regulations, this table indicates the options for installing i-Size child seats on seats in the vehicle fitted with ISOFIX mountings approved for i-Size.SeatFront passenger airbagi-Size restraint systemRow 1 (a)(depending on version)Passenger seat with ISOFIX, with or without height adjustment (b)Deactivated: "OFF"i-UActivated: "ON"i-UFPassenger seat without ISOFIXNot i-Size
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131