Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Practical information Roof bars

150Practical informationOnly use chains that have been designed to be fitted on the type of wheel on the vehicle:Original tyre sizeMaximum link size185/65 R159 mm (PolaireXP9)195/55 R169 mm (PolaireXP9)205/45 R17Cannot be fitted with chainsFor more information on snow chains, contact a PEUGEOT dealer or a qualified workshop.Installation tips ►To fit the snow chains during a journey, stop the vehicle on a flat surface at the side of the road.►Apply the parking brake and position any wheel chocks under the wheels to prevent movement of the vehicle.►Fit the snow chains following the instructions provided by the manufacturer.►Move off gently and drive for a few moments, without exceeding 31mph (50km/h).►Stop the vehicle and check that the snow chains are correctly tightened.It is strongly recommended that you practise fitting the snow chains on a level and dry surface before setting off.Avoid driving with snow chains on roads that have been cleared of snow to avoid damaging the vehicle's tyres and the road ►Replace the protective plug 2 into the carrier1.►Stow the towball in its bag to protect it from knocks and dirt.Roof barsAs a safety measure and to avoid damaging the roof, it is essential to use transverse roof bars approved for your vehicle.Observe the instructions on fitting and use contained in the guide supplied with the roof bars.Maximum load distributed over the roof bars, for a loading height not exceeding 40 cm: 70kg.As this value may change, please verify the maximum load quoted in the guide supplied with the roof bars.If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars and the fixings on the vehicle.Be sure to refer to national legislation in order to comply with the regulations for transporting objects that are longer than the vehicle.RecommendationsDistribute the load uniformly, taking care to avoid overloading one of the sides.Arrange the heaviest part of the load as close as possible to the roof.Secure the load firmly.Drive gently: the vehicle will be more susceptible to the effects of side winds and its stability may be affected.Regularly check the security and tight fastening of the roof bars, at least before each trip.Remove the roof bars once they are no longer needed.Fitting directly to the roofYou must only attach the transverse bars to the four fixing points located on the roof frame. These points are concealed by the vehicle doors when the doors are closed.The roof bar fixings have a stud which must be inserted into the opening of each fixing point.Snow chainsIn wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.Snow chains must be fitted only to the front wheels. They must never be fitted to "space-saver" type spare wheels.Observe the legislation in force in your country relating to the use of snow chains and maximum authorised speeds.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131