Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Practical information Charging the traction battery (Electric)

143Practical information7Accelerated charging, mode 3Accelerated charging unit (Wallbox)(accelerated charging - single-phase or three-phase alternating current (AC))Depending on version, in mode 3 with an accelerated charging unit (Wallbox): 32A maximum charging current.Charging cable, mode 3 (AC)Accelerated charging unit (Wallbox)Do not disassemble or modify the charging unit - risk of electrocution and/or fire!Refer to the charging unit manufacturer's user manual for the operating instructions.Fast charging, mode 4Public fast charger(superfast charging - direct current (DC))Charging cable, mode 4 (DC)(integrated into the public fast charger)Only use public fast chargers where the cable length does not exceed 30 metres.Charging the traction battery (Electric)To recharge, connect the vehicle to a domestic electricity supply (domestic or accelerated charging) or to a fast public charger (superfast charging).For a full charge, follow the desired charging procedure without pausing it, until it ends automatically. Charging can be either immediate or deferred (except fast public charger, mode 4).You can stop domestic or accelerated charging at any time by unlocking the vehicle and removing the nozzle. For superfast charging, refer to the fast public charger.For more information on the charging displays on the Instrument panel and the Touch screen, refer to the corresponding section.It is also possible to monitor the charging progress using the MYPEUGEOT APPapplication.For more information on Remote functions, refer to the corresponding section.As a safety measure, the engine will not start if the charging cable is plugged into the connector on the vehicle. A warning is displayed on the instrument panel.Cooling the traction batteryThe cooling fan in the engine compartment comes on during charging to cool the on-board charger and the traction battery.
144Practical informationConnection►Before charging, check that the drive selector is in modeP, otherwise charging is not possible.►Open the charging flap by pressing the push-button, and check that there are no foreign bodies on the charging connector.Domestic charging, mode2►Connect the charging cable from the control unit to the domestic socket.When the connection is made, all of the indicator lamps on the control unit light up, then only the POWER indicator lamp remains on in green.►Remove the protective cover from the charging nozzle.►Insert the nozzle into the charging connector.The start of charging is confirmed by the flashing green CHARGE indicator lamps in the flap, then those on the control unit.Vehicle in storage for more than 1 monthDischarge the traction battery down to 2 or 3 bars on the charge level indicator on the instrument panel.Do not connect the charging cable.Always park the vehicle in a place with temperatures between -10°C and 30°C (parking in a place with extreme temperatures can damage the traction battery).Disconnect the cable from the (+) terminal of the accessory battery in the engine compartment.Connect a 12 V battery charger to the (+) and (-) terminals of the accessory battery about every 3 months in order to recharge the accessory battery and maintain an operating voltage.PrecautionsElectric vehicles were developed in accordance with the guidelines on maximum electromagnetic fields issued by the International Commission on Non-Ionizing Radiation Protection(ICNIRP - 1998 Guidelines).Wearers of pacemakers or equivalent devicesThe electric vehicles have been developed in accordance with the guidelines on the maximum levels for electromagnetic fields issued by the International Commission on Non-Ionizing Radiation Protection (ICNIRP - 1998 Guidelines).If in doubtDomestic or accelerated charging: do not remain inside or near the vehicle, or near the charging cable or charging unit, even for a short time.Superfast charging: do not use the system yourself and avoid approaching public fast charging points. Leave the area and ask a third party to recharge the vehicle.For domestic or accelerated chargingBefore chargingDepending on the context:►Have a professional check that the electrical system to be used complies with applicable standards and is compatible with the vehicle.►Have a professional electrician install a dedicated domestic power socket or accelerated charging unit (Wallbox) compatible with the vehicle.You should preferably use the charging cable available as an accessory.For more information, contact a PEUGEOT dealer or a qualified workshop.(During charging)While charging is in progress, unlocking the vehicle will cause the charging to stop.If no action is taken on one of the openings (door or boot) or on the charging nozzle, the vehicle will lock again after 30 seconds and charging will resume automatically.Never work under the bonnet:–Some areas remain very hot, even an hour after charging ends - risk of burns!–The fan may start at any time - risk of cuts or strangulation!After chargingCheck that the charging flap is closed.Do not leave the cable connected to the domestic power socket - risk of short-circuit or electrocution in the event of contact with or immersion in water!For superfast chargingBefore chargingCheck that the fast public charging station and its charging cable are compatible with the vehicle.If the exterior temperature is below:–0°C, charging times may be extended.–-20°C, charging is still possible, but charging times may be extended even further (the battery has to be heated first).After chargingCheck that the charging flap is closed.
145Practical information7Connection►Before charging, check that the drive selector is in modeP, otherwise charging is not possible.►Open the charging flap by pressing the push-button, and check that there are no foreign bodies on the charging connector.Domestic charging, mode2►Connect the charging cable from the control unit to the domestic socket.When the connection is made, all of the indicator lamps on the control unit light up, then only the POWER indicator lamp remains on in green.►Remove the protective cover from the charging nozzle.►Insert the nozzle into the charging connector.The start of charging is confirmed by the flashing green CHARGE indicator lamps in the flap, then those on the control unit.If this is not the case, charging has not started; restart the procedure, ensuring that all connections are properly established.The red indicator lamp in the flap comes on to indicate that the nozzle is locked.When charging is complete and while the charging cable is still connected, opening the driver's door will display the charge level on the instrument panel for about 20 seconds.Accelerated charging, mode 3►Follow the accelerated charging unit (Wallbox) user instructions.►Remove the protective cover from the charging nozzle.►Insert the nozzle into the charging connector.The start of charging is confirmed when the charging indicator lamp in the flap flashes green.If this is not the case, charging has not started; restart the procedure, ensuring that the connection has been properly established.The red indicator lamp in the flap comes on to indicate that the nozzle is locked.Superfast charging, mode4►Depending on version, remove the protective cover from the lower part of the connector.►Follow the instructions for use of the fast public charger and connect the cable from the fast public chargerto the vehicle's connector.The start of charging is confirmed by the flashing green charging indicator lamp in the flap.If this is not the case, charging has not started; restart the procedure, ensuring that the connection is properly established.The red indicator lamp in the flap comes on to indicate that the nozzle is locked.Deferred chargingSettings(Depending on country of sale)On a smartphone or tabletYou can programme the deferred charging function at any time via the MYPEUGEOT APP application.For more information on Remote functions, refer to the corresponding section.
146Practical informationIn the vehicle, with PEUGEOT Connect NavDepending on version, the Energy menu can be accessed either:–directly, by pressing the button near the touch screen (with 10" touch screen).–via the Applications menu. ►In the Energy touch screen menu, select the Charge page.►Set the charging start time.►Press OK.The setting is saved in the system.ActivationDeferred charging is only possible with modes 2 and 3.►After programming the deferred charging, connect your vehicle to the desired charging equipment.►Press this button in the flap within one minute to activate the system (confirmed by the charging indicator lamp coming on in blue).DisconnectionBefore disconnecting the nozzle from the charging connector:►If the vehicle is unlocked, lock it and then unlock it.►If the vehicle is locked, unlock it.The red indicator lamp in the flap goes out to confirm that the charging nozzle is unlocked.►Within 30 seconds, remove the charging nozzle.The charging indicator lamp comes on in white.With selective door unlocking activated, press the unlocking button twice to disconnect the charging nozzle.When charging is complete, the green charging indicator lamp in the flap goes out after about 2 minutes.Domestic charging, mode 2The end of charging is confirmed when the green CHARGE indicator lamp on the control unit and the green charging indicator lamp in the flap come on fixed.►Replace the protective cover on the charging nozzle and close the charging flap.►Disconnect the control unit end of the charging cable from the domestic socket.Accelerated charging, mode3The end of charging is indicated by the charging control unit and by the fixed lighting of the green indicator lamp in the flap.►Hang up the nozzle on the charging unit and close the charging flap.Superfast charging, mode 4The end of charging is indicated by the charger and by the fixed lighting of the green indicator lamp in the flap.►You can also pause charging by pressing this button in the flap (in mode 4 only).►Hang up the nozzle on the charger.►Depending on version, replace the protective cover on the lower section and close the charging flap.When the charging nozzle is disconnected, a message on the instrument panel indicates that charging is complete, even if the charging nozzle was disconnected before full charging was completed.Towing deviceLoad distribution►Distribute the load in the trailer so that the heaviest items are as close as possible to the
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131