Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Instruments Indicators

19Instruments1Water in Diesel fuel filterFixed (with LCD instrument panels).The Diesel fuel filter contains water.Carry out (2) without delay. Risk of damaging the fuel injection system!IndicatorsService indicatorThe servicing information is expressed in terms of distance (miles or kilometres) and time (months or days).The alert is given at whichever of these two terms is reached first.The servicing information is displayed in the instrument panel. Depending on the version of the vehicle:–The distance recorder display line indicates the distance remaining before the next service is due, or the distance travelled since it was due preceded by the "-" sign.–An alert message indicates the distance remaining, as well as the period before the next service is due or how long it is overdue.The value indicated is calculated according to the distance covered and the time elapsed since the last service.The alert may also be triggered close to a due date.Service spannerOn temporarily when the ignition is switched on.Between 620 and 1,860 miles (1,000 and 3,000 km) remain before the next service is due.Fixed, when the ignition is switched on.The next service is due in less than 620 miles (1,000 km).Have your vehicle serviced very soon.Service spanner flashingFlashing then fixed, when the ignition is switched on.(WithBlueHDiDiesel engines, associated with the Service warning lamp.)The servicing interval has been exceeded.Have your vehicle serviced as soon as possible.Resetting the service indicatorThe service indicator must be reset after each service.If you have serviced your vehicle yourself:►Switch the ignition off.►Press and hold the button located on the end of the lighting control stalk.►Without pressing the brake pedal, press the START/STOP button once; a temporary display window appears and a countdown begins.►When the display indicates =0, release the lighting control stalk button; the spanner symbol disappears.If you disconnect the battery following this operation, lock the vehicle and wait at least 5 minutes for the reset to be registered.Reminder of the servicing informationYou can view the servicing information by pressing the "Check" buttonin the Driving/Vehicle touch screen menu.Engine oil level indicator(Depending on version)On versions fitted with an electric gauge, the engine oil level status is displayed on the instrument panel for a few seconds when the ignition is switched on, after the servicing information.The level read will only be correct if the vehicle is on level ground and the engine has been off for more than 30 minutes.
20InstrumentsActions required related to a lack of AdBlue®The following warning lamps light up when the quantity of AdBlue® is below the reserve level: driving range of 1,500 miles (2,400 km).Together with the warning lamps, messages regularly remind you of the need to top up to avoid engine starting being prevented. Refer to the Warning and indicator lamps section for details of the messages displayed.For more information on AdBlue®(BlueHDi) and in particular on topping up, refer to the corresponding section.Warning/indicator lamps onActionRemaining rangeTop up.Between 1,500 miles and 500 miles (2,400 km and 800 km)Top up as soon as possible.Between 500 miles and 62 miles (800 km and 100km)Low oil levelThis is indicated by the display of "OIL" or by the message "Oil level incorrect" (depending on the instrument panel), accompanied by the lighting of the Service warning lamp and an audible signal.If a low oil level is confirmed by a check using the dipstick, the level must be topped up to avoid damage to the engine.For more information on Checking levels, refer to the corresponding section.Oil gauge malfunctionThis is indicated by the display of "OIL_ _" or by the message "Oil level measurement invalid" (depending on the instrument panel), accompanied by the lighting of the Service warning lamp and an audible signal.Consult a PEUGEOT dealer or a qualified workshop.In the event of a malfunction of the electric gauge, the oil level is no longer monitored.If the system is faulty, you must check the engine oil level using the manual dipstick located in the engine compartment.For more information on Checking levels, refer to the corresponding section.Coolant temperature indicatorWith the engine running:–In zone A, the temperature is correct.–In zone B, the temperature is too high. The associated warning lamp and the STOPwarninglamp light up in red on the instrument panel, accompanied by the display of a message and an audible signal.You must stop the vehicle as soon as it is safe to do so.Wait a few minutes before switching off the engine.After switching off the ignition, carefully open the bonnet and check the coolant level.For more information on Checking levels, refer to the corresponding section.AdBlue® range indicators (BlueHDi)The Diesel BlueHDi engines are equipped with a system that associates the SCR (Selective Catalytic Reduction) emissions control system and the Diesel particle filter (DPF) for the treatment of exhaust gases. They cannot function without AdBlue® fluid.When the level of AdBlue® falls below the reserve level (between 1,500 and 0 miles (2,400 and 0km)), a warning lamp lights up when the ignition is switched on and an estimate of the distance that can be travelled before engine starting is prevented is displayed in the instrument panel.The engine starting prevention system required by regulations is activated automatically once the AdBlue® tank is empty. It is then no longer possible to start the engine until the minimum level of AdBlue® has been topped up.Manual display of driving range(With matrix instrument panel and digital instrument panel)While the driving range is greater than 1,500 miles (2,400km), it is not displayed automatically.You can view the range information by pressing the "Check" buttonin theDriving/Vehicletouch screenmenu.
21Instruments1Actions required related to a lack of AdBlue®The following warning lamps light up when the quantity of AdBlue® is below the reserve level: driving range of 1,500 miles (2,400 km).Together with the warning lamps, messages regularly remind you of the need to top up to avoid engine starting being prevented. Refer to the Warning and indicator lamps section for details of the messages displayed.For more information on AdBlue®(BlueHDi) and in particular on topping up, refer to the corresponding section.Warning/indicator lamps onActionRemaining rangeTop up.Between 1,500 miles and 500 miles (2,400 km and 800 km)Top up as soon as possible.Between 500 miles and 62 miles (800 km and 100km)Warning/indicator lamps onActionRemaining rangeA top-up is vital, there is a risk that the engine will be prevented from starting.Between 62 miles and 0 miles (100 km and 0 km)To be able to restart the engine, add at least 5 litres of AdBlue® to the tank.0 miles (km)Malfunction of the SCR emissions control systemMalfunction detectionIf a malfunction is detected, these warning lamps come on, accompanied by an audible signal and the display of an "Emissions controlfault" or "NO START IN" message.The alert is triggered while driving when the fault is detected for the first time, and thereafter when switching on the ignition for subsequent journeys, for as long as the cause of the fault persists.If the fault is temporary, the alert disappears during the next journey, after self-diagnostic checks of the SCR emissions control system.Malfunction confirmed during the permitted driving phase (between 685 miles and 0miles (1,100 km and 0 km))If the fault indication is still displayed permanently after 31 miles (50km) of driving, the fault in the SCR system is confirmed.The AdBlue warning lamp flashes and a message is displayed ("Emissions controlfault: starting prevented in X miles (kms)" or "NO START IN X miles (kms)"), indicating the driving range in miles or kilometres.While driving, the message is displayed every 30 seconds. The alert is repeated when switching on the ignition.You can continue driving for up to 685 miles (1,100km) before the engine starting prevention system is triggered.Have it checked by a PEUGEOT dealer or a qualified workshop.
22InstrumentsStarting preventedEvery time the ignition is switched on, the message "Emissions controlfault: Starting prevented" or "NO START IN" is displayed.To restart the engineContact a PEUGEOT dealer or a qualified workshop.Power indicator (Electric)CHARGETraction battery charging during deceleration and braking.ECOModerate energy consumption and optimised driving range.POWEREnergy consumption by the drive train during acceleration.NEUTRALOn switching on the ignition, your vehicle’s electric drive train neither consumes nor generates energy: after sweeping over the indicator, the needle or the cursor returns to its "neutral" position.With the ignition off, opening the driver's door activates the indicator, which moves to the "neutral" position.Charge level indicator (Electric)The traction battery's actual charge level and the remaining range are displayed continuously when the vehicle is started.With the ignition off, opening the driver's door activates the indicator.Associated warning lampsTwo successive alert levels indicate that the energy available has dropped to a low level:1st level: ReserveThe state of charge of the traction battery is low.Fixed and indicator in the red zone, accompanied by an audible signal.►View the remaining range on the instrument panel.►Put the vehicle on charge as soon as possible.2nd level: CriticalThe state of charge of the traction battery is critical.Fixed, together with the reserve warning lamp, accompanied by an audible signal.►You must put the vehicle on charge.The remaining range is no longer calculated. The drive train power gradually decreases.The heating and air conditioning are switched off (even if the needle or cursor indicating their consumption is not at the "ECO" position). Thermal comfort consumption indicator (Electric)(Depending on version)
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131