Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 In the event of a breakdown Warning triangle

164In the event of a breakdownWarning triangleThis reflective and dismantlabledevice is to be installed on the side of the road when a vehicle is broken down or damaged.Before getting out of the vehicleTurn on the hazard warning lamps, then put on the safety vest to assemble and install the triangle.Assembling and placing the triangleFor versions supplied with a triangle as original equipment, refer to the illustration above.For other versions, refer to the assembly instructions provided with the triangle.►Put the triangle in place behind the vehicle, as required by local legislation.Running out of fuel (Diesel)With Diesel engines, the fuel system must be primed if you run out of fuel.Before starting to prime the system, it is essential to put at least 5 litres of Diesel into the fuel tank.For more information on Refuelling and on Misfuel prevention (Diesel), refer to the corresponding section.For non-BlueHDi versions, the fuel system components are located in the engine compartment; this may be under a removable cover.For more information on the Engine compartment, in particular the location of these components under the bonnet, refer to the corresponding section.1.5 BlueHDi engines►Switch on the ignition (without starting the engine).►Wait around 1minute and switch off the ignition.►Operate the starter motor to start the engine.If the engine does not start at the first attempt, do not keep trying, but restart the procedure.1.6 HDi engines►Open the bonnet and then, if necessary, unclip the cover to access the priming pump.►Operate the priming pump repeatedly until resistance is felt (resistance may be felt at the first press).►Operate the starter motor to start the engine (if the engine does not start at the first attempt, wait around 15 seconds before trying again).►If the engine does not start after a few attempts, operate the priming pump again, then the starter motor.►Put the cover back in place and clip it in, then close the bonnet.Tool kitSet of tools supplied with the vehicle.Its content depends on your vehicle's equipment:–Temporary puncture repair kit.–Spare wheel.Access to the toolsDepending on version, the tool kit is stored in a bag or in a storage box in the boot.On the boot carpetUnder the boot carpet►Raise the boot carpet by pulling the strap to access the tools. With temporary puncture repair kit
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131