Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Ease of use and comfort Interior fittings

51Ease of use and comfort3Switch off demisting/defrosting when you no longer need it; reducing electrical consumption in turn decreases energy consumption.Temperature pre-conditioning (Electric)This function allows you to programme the temperature in the passenger compartment to reach a pre-defined, non-modifiable temperature (approx. 21°C) before you enter the vehicle, on the days and at the times of your choice.This function is available when the vehicle is connected or not connected.ProgrammingWith PEUGEOT Connect Radio or PEUGEOT Connect Nav system(Depending on country of sale)Programming can be carried out from a smartphone using the MYPEUGEOT APPapplication.For more information on Remote functions, refer to the corresponding section.With PEUGEOT Connect Nav systemIn the Climate> OPTIONSmenu:Select Temperature conditioning. ►Press + to add a programme.►Select the time of entry into the vehicle and the desired days. Press OK.►Press ON to activate this programme.The temperature pre-conditioning sequence begins approximately 45 minutes before the programmed time when the vehicle is connected (20 minutes when it is not connected) and is maintained for 10 minutes after.You can set multiple programmes.Each one is saved in the system.To optimise the driving range, we recommend starting a programme while the vehicle is connected.The fan noise that occurs during temperature pre-conditioning is perfectly normal.Operating conditions–The function is only activated when the ignition is switched off and the vehicle locked.–When the vehicle is not connected, the function is only activated if the battery charge level is greater than 50%.–When the vehicle is not connected and a recurring programme is active (e.g. from Monday to Friday), if two temperature pre-conditioning sequences are run without the vehicle being used, the programme will be deactivated.Interior fittings1.Grab handle2.Sun visor3.Glove box4.Door pockets5.Storage compartment or Storage compartment with flap or Wireless smartphone charger with flap (depending on version)►Press the top centre of the flap to open it.6.Storage compartment with 12 V accessory socket7.Cup holder8.Centre armrest with storage compartmentRear USB socket(s) (depending on version)Make sure you do not leave any item in the passenger compartment which could act like a magnifying glass under the effect of
52Ease of use and comfortWith the Keyless Entry and Starting system, the charger’s operation may be briefly disrupted when a door is opened or the ignition is switched off.Charging►Open the flap to access the charging area.►With the charging area clear, place a device in its centre.The system is not designed to charge multiple devices simultaneously.Do not leave any metal objects (coins, keys, vehicle remote control, etc.) in the charging area while a device is being charged, due to the risk of overheating or interrupting the charging process.the sun's rays and cause a fire - risk of fire or damage to interior surfaces!Sun visor►With the ignition on, raise the concealing flap; depending on the version, the mirror is illuminated automatically.This sun visor is also equipped with a ticket holder.Glove box►To open the glove box, lift the handle.Never drive with the glove box open when a passenger is at the front. It may cause injury during sharp deceleration!USB socketsUSB sockets allow the connection of a portable device.The USB socket at the front on the right-hand side also allows a smartphone to be connected by Android Auto® or CarPlay®, enabling certain smartphone applications to be used on the touch screen.For best results, use a cable made or approved by the device manufacturer.These applications can be managed using the steering-mounted controls or the audio system controls.When the USB socket is used, the portable device charges automatically.While charging, a message is displayed if the power drawn by the portable device exceeds the current supplied by the vehicle.For more information about how to use this equipment, refer to the sections describing the audio and telematics systems.12V accessory socket►Plug in a 12V accessory (with a maximum rated power of 120W) using a suitable adapter.Observe the maximum power rating to avoid damaging the accessory.The connection of an electrical device not approved by PEUGEOT, such as a USB charger, may adversely affect the operation of vehicle electrical systems, causing faults such as poor radio reception or interference with displays in the screens.Wireless smartphone chargerThis system allows wireless charging of a portable device such as a smartphone, using the magnetic induction principle, in accordance with the Qi 1.1 standard.The portable device to be charged must be compatible with the Qi standard, either by design or by using a compatible holder or shell.A mat can also be used provided that it is approved by the Manufacturer.The charging area is identified by the Qi symbol.The charger works with the engine running and with the Stop & Start system in STOP mode.Charging is managed by the smartphone.
53Ease of use and comfort3With the Keyless Entry and Starting system, the charger’s operation may be briefly disrupted when a door is opened or the ignition is switched off.Charging►Open the flap to access the charging area.►With the charging area clear, place a device in its centre.The system is not designed to charge multiple devices simultaneously.Do not leave any metal objects (coins, keys, vehicle remote control, etc.) in the charging area while a device is being charged, due to the risk of overheating or interrupting the charging process.MatsFittingWhen fitting it on the driver's side, only use the mountings present on the carpet (a "click" indicates proper locking).The other mats are simply laid over the carpet.Removing/refitting►To remove it on the driver's side, move the seat backwards and unclip the fasteners.►To refit it, position the mat and secure it by pressing down.►Check that the mat is secured correctly.To avoid any risk of jamming the pedals:–Only use mats which are suited to the fixings already present in the vehicle; these fixings must be used.–Never fit one mat on top of another.The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control/speed limiter.The approved mats have two fasteners located underneath the seat.Courtesy lampsNon touch-sensitive version1.Front courtesy lamp2.Front reading lamps (depending on version)Front courtesy lampIn this position, the courtesy lamp comes on gradually:–when the vehicle is unlocked.–when the key is removed from the ignition switch.–when a door is opened.–when the remote control locking button is activated, in order to locate the vehicle.It switches off gradually:–when the vehicle is locked.–when the ignition is switched on.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131