Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Ease of use and comfort Front seats

41Ease of use and comfort3PEUGEOTi-CockpitBefore taking to the road and to make the most of the ergonomic layout of the PEUGEOT i-Cockpit, carry out these adjustments in the following order:–head restraint height.–seat backrest angle.–seat cushion height.–longitudinal seat position.–steering wheel reach and then height.–rear view mirror and door mirrors.Once these adjustments have been made, check that the "head-up" instrument panel can be viewed correctly over the smaller diameter steering wheel.Before moving the seat backwards, ensure that there is no person or object that might prevent the full travel of the seat.There is a risk of trapping or pinching passengers if present in the rear seats or of jamming the seat if large objects are placed on the floor behind the seat.Front seatsFront head restraintsAdjusting the heightUpwards:►Pull the head restraint up to the desired position; you can feel the head restraint clicking into position.Downwards:►Press lug A to lower the head restraint.The head restraint is correctly adjusted when its upper edge is level with the top of the occupant's head.Removing a head restraint►Pull the head restraint fully up.►Press lug A to release the head restraint and raise it fully.►Stow the head restraint securely.Refitting a head restraint►Insert the head restraint rods into the guides in the corresponding seat backrest.►Push the head restraint fully down.►Press the lug A to release the head restraint and push it down.►Adjust the height of the head restraint.Never drive with the head restraints removed; they should be in place and adjusted for the occupant of the seat.Manually-adjustable seatsLongitudinal
42Ease of use and comfortAfter one hour, the function is deactivated; the indicator lamp goes off.Heated seatsThe function is active only with the engine running and when the outside temperature is below 20°C.►Press the button corresponding to the seat.►Each press changes the heating level; the corresponding number of indicator lamps come on.►To switch off the heating, press the button until all of the indicator lamps are off.The system status is memorised when the ignition is switched off.Do not use the function when the seat is not occupied.Reduce the heating intensity as soon as possible.When the seat and passenger compartment have reached a satisfactory temperature, switch the function off; reducing electrical ►Raise the control bar and slide the seat forwards or backwards.►Release the control bar to lock the seat in position on one of the notches.Backrest angle►Turn the knob to obtain the desired angle.Height►Pull the control upwards to raise or push it downwards to lower, until you obtain the position required.Electrically-adjustable seatsLongitudinal►Push the control forwards or backwards to slide the seat.Backrest angle►Tilt the control forwards or rearwards.Cushion height and angle►Tilt the rear of the control upwards or downwards to obtain the required height and angle.Electric lumbar adjustment►Press the + or - control to obtain the desired lumbar support.Massage function(Driver’s seat only)This function provides lumbar massage; it only operates when the engine is running as well as in STOP mode of the Stop & Start system.Activation/Deactivation►Press this button to activate/deactivate the function.Upon activation, the indicator lamp comes on. The massage function is activated for a period of one hour.During this time, massage is performed in 6cycles of 10minutes (6minutes of massage followed by a 4-minute break).
43Ease of use and comfort3After one hour, the function is deactivated; the indicator lamp goes off.Heated seatsThe function is active only with the engine running and when the outside temperature is below 20°C.►Press the button corresponding to the seat.►Each press changes the heating level; the corresponding number of indicator lamps come on.►To switch off the heating, press the button until all of the indicator lamps are off.The system status is memorised when the ignition is switched off.Do not use the function when the seat is not occupied.Reduce the heating intensity as soon as possible.When the seat and passenger compartment have reached a satisfactory temperature, switch the function off; reducing electrical consumption in turn decreases energy consumption.Prolonged use of heated seats is not recommended for people with sensitive skin.There is a risk of burns for people whose perception of heat is impaired (e.g.illness, taking medication).To keep the heated pad intact and to prevent a short circuit:–Do not place heavy or sharp objects on the seat.–Do not kneel or stand on the seat.–Do not spill liquids onto the seat.–Never use the heating function if the seat is damp.Steering wheel adjustment►When stationary, pull the control to release the steering wheel.►Adjust the height and reach to suit your driving position.►Push the control to lock the steering wheel.For safety reasons, these adjustments must only be carried out with the vehicle stationary.MirrorsDoor mirrorsAs a safety measure, the mirrors should be adjusted to reduce the "blind spots".The objects that you see in the mirrors are in fact closer than they appear. Take this into account in order to correctly judge the distance of vehicles approaching from behind.Manual adjustment►Move the adjustment lever in any of the four directions to position the mirror.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131