Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Driving Parking sensors

127Driving6As soon as the speed of the vehicle drops below 43mph (70km/h), the system goes into standby.Driving time starts being counted again once the speed reaches above 43mph (70km/h).Driver Attention Warning by CameraThe system assesses the driver's level of alertness, fatigue and distraction by identifying trajectory changes in relation to the lane markings.To do this, the system uses a camera, placed on the upper part of the windscreen.This system is particularly suited to fast roads (speed higher than 43 mph (70km/h)).At a first alert level, the driver is warned by the message "Be vigilant!", accompanied by an audible signal.After three first-level alerts, the system triggers a further alert with the message "Dangerous driving: take a break", accompanied by a more pronounced audible signal.In certain driving conditions (poor road surface or strong winds), the system may give alerts independent of the driver's level of vigilance.The following situations may interfere with the operation of the system or prevent it from working:–lane markings absent, worn, hidden (snow, mud) or multiple (roadworks);–close to the vehicle ahead (lane markings not detected);–roads that are narrow, winding, etc.Parking sensorsFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system detects and signals the proximity of obstacles (e.g.pedestrian, vehicle, tree, barrier) using sensors located in the bumper.Rear parking sensors►Engage reverse gear to start the system (confirmed by an audible signal).The system is switched off when reverse gear is disengaged.Audible assistanceThe system signals the presence of obstacles within the sensors’ detection zone.The proximity information is given by an intermittent audible signal, the frequency of which increases as the vehicle approaches the obstacle.When the distance between the vehicle and the obstacle becomes less than about thirty centimetres, the audible signal becomes continuous.The sound emitted by the speaker (right or left) indicates the side on which the obstacle is located.
128DrivingAdjusting the audible signalDepending on version, with PEUGEOT Connect Radio or PEUGEOT Connect Nav, pressing this button opens the window for adjusting the volume of the audible signal.Visual assistanceThis supplements the audible signal by displaying bars on the screen whose location represents the distance between the obstacle and the vehicle (white: more distant, orange: close, red: very close).When the obstacle is very close, the "Danger" symbol is displayed on the screen.Front parking sensorsSupplementing the rear parking sensors, the front parking sensors are triggered when an obstacle is detected in front and the speed of the vehicle is below 6 mph (10km/h).Front parking sensor operation is suspended if the vehicle stops for more than three seconds in forward gear, if an obstacle is no longer detected or the vehicle speed exceeds 6mph (10km/h).The sound emitted by the speaker (front or rear) locates the obstacle relative to the vehicle, in front or behind it.Side parking sensorsUsing four additional sensors located on the sides of the bumpers, the system records the position of obstacles during the manoeuvre and indicates them when they are located alongside the vehicle.Only fixed obstacles are indicated correctly. Moving obstacles detected at the beginning of the manoeuvre may be indicated mistakenly, while moving obstacles that appear alongside the vehicle but were not previously recorded will not be indicated.Objects memorised during the manoeuvre will no longer be stored after switching off the ignition.Deactivation/ActivationThe settings are changed via theDriving/Vehicletouch screen menu.The system status is memorised when the ignition is switched off.The rear parking sensors system will be deactivated automatically if a trailer or bicycle carrier is connected to a towing device installed in accordance with the manufacturer's recommendations.In this case, the outline of a trailer is displayed at the rear of the image of the vehicle.The parking sensors are deactivated while the Park Assist function is measuring a space.For more information on the Park Assistfunction, refer to the corresponding section.When starting the vehicle, the graphic and audible aids are only available after the touch screen has started up.Operating limitsIf the boot is heavily loaded, the vehicle may tilt, affecting distance measurements.MalfunctionIn the event of a malfunction when changing into reverse gear, one of these warning lamps lights up on the instrument panel, accompanied by the display of a message and an audible signal (short beep).Have it checked by a PEUGEOT dealer or a qualified workshop.Visiopark 1For more information, refer to the General recommendations on the use of driving and manoeuvring aids.As soon as reverse gear is engaged with the engine running, this system displays views of your vehicle’s close surroundings on the touch
129Driving6Operating limitsIf the boot is heavily loaded, the vehicle may tilt, affecting distance measurements.MalfunctionIn the event of a malfunction when changing into reverse gear, one of these warning lamps lights up on the instrument panel, accompanied by the display of a message and an audible signal (short beep).Have it checked by a PEUGEOT dealer or a qualified workshop.Visiopark 1For more information, refer to the General recommendations on the use of driving and manoeuvring aids.As soon as reverse gear is engaged with the engine running, this system displays views of your vehicle’s close surroundings on the touch screen using a camera located at the rear of the vehicle.The screen is divided into two parts with a contextual view and a view from above the vehicle in its close surroundings.The parking sensors supplement the information on the view from above the vehicle.Various contextual views may be displayed:–Standard view.–180° view.–Zoom view.AUTO mode is activated by default.In this mode, the system chooses the best view to display(standard or zoom).You can change the type of view at any time during a manoeuvre.The system status is not saved when the ignition is switched off.Principle of operationUsing the rear camera, the vehicle's close surroundings are recorded during manoeuvres at low speed.An image from above your vehicle in its close surroundings is reconstructed (represented between the brackets) in real time and as the manoeuvre progresses.It facilitates the alignment of your vehicle when parking and allows obstacles close to the vehicle to be seen. It is automatically deleted if the vehicle remains stationary for too long.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131