Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Driving Manual parking brake

89Driving6►Place and hold the remote control against the back-up reader.►With a manual gearbox, place the gear lever in neutral, then fully depress the clutch pedal.►With an automatic gearbox or a drive selector, select modeP, then depress the brake pedal.►Press the "START/STOP" button.The engine starts.Back-up switch-offIf the electronic key is not detected or is no longer in the recognition zone, a message appears in the instrument panel when closing a door or trying to switch off the engine.►To confirm the instruction to switch off the engine, press the "START/STOP" button for approximately 5seconds.In the event of a fault with the electronic key, contact a PEUGEOT dealer or a qualified workshop.Emergency switch-offIn case of emergency only, the engine can be switched off without conditions (even when driving).►Press the "START/STOP" button for about 5seconds.In this case, the steering column locks as soon as the vehicle stops.Manual parking brakeRelease►Pull the parking brake lever up slightly, press the release button, then lower the lever fully.When driving the vehicle, if this warning lamp and the STOP warning lamp come on, accompanied by an audible signal and the display of a message, this means that the parking brake is still applied or has not been fully released.Application►Pull the parking brake lever up to immobilise the vehicle.When parking on a slope, turn the wheels against the kerb, apply the parking brake, engage a gear and switch off the ignition.Electric parking brakeIn automatic mode, this system applies the parking brake when the engine is switched off and releases it when the vehicle moves off.At any time, with the engine running:►To apply the parking brake, briefly pull the control.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131