Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Driving Gear shift indicator

100Driving–If mode D or M is selected on an automatic gearbox.–If mode D or B is selected on the drive selector.Facing downhill, with the vehicle stationary and reverse gear engaged, the vehicle is held for a short time when the driver releases the brake pedal.MalfunctionIf the event of a malfunction, these warning lamps light up on the instrument panel, accompanied by the display of a message.Have it checked by a PEUGEOT dealer or a qualified workshop.Gear shift indicatorThis system is designed to reduce fuel consumption by recommending the most suitable gear.OperationDepending on the driving situation and the vehicle's equipment, the system may recommend skipping one or more gears.Gear engagement recommendations are not to be considered mandatory. Indeed, the configuration of the road, the traffic density and safety remain determining factors when choosing the best gear. Therefore, the driver remains responsible for deciding whether or not to follow the system’s advice.The system cannot be deactivated.With an automatic gearbox, the system is only active in manual operation.The information appears on the instrument panel, in the form of an arrow and the recommended gear.The system adapts the gear change instructions according to the driving conditions (e.g.slope, load) and driving style (e.g.power demand, acceleration, braking).The system never suggests:–engaging first gear;–engaging reverse gear.Stop & StartThe Stop & Start function puts the engine temporarily into standby - STOP mode - during phases when the vehicle is stationary (e.g.red lights, traffic jams). The engine automatically restarts - START mode - as soon as the driver indicates the intention of moving off again.Primarily designed for urban use, the function is intended to reduce fuel consumption and exhaust emissions as well as the noise level when stationary.The function does not affect the functionalities of the vehicle, in particular the braking.Deactivation/ReactivationThe function is activated by default when the ignition is switched on.The settings are changed via the Driving/Vehicle touch screen menu.A message on the instrument panel confirms the change of status.When the function is deactivated, if the engine was in standby, it restarts immediately.Associated indicator lampsFunction activated. Function deactivated or malfunction. Opening the bonnetBefore doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury caused by the engine restarting automatically.Driving on flooded roadsBefore entering into a flooded area, it is strongly recommended that you deactivate the Stop & Start system.For more information on Driving recommendations, particularly on flooded roads, refer to the corresponding section.OperationMain conditions for operation–The driver’s door must be closed.–The driver's seat belt must be fastened.–The level of charge in the battery must be sufficient.–The temperature of the engine must be within its nominal operating range.–The outside temperature must be between 0°C and 35°C.Putting the engine into standby (STOP mode)The engine automatically enters standby mode as soon as the driver indicates their intention to stop:
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131