Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Driving Cruise control

110Driving–In heavy traffic (except versions with the Stop & Go function).–On winding or steep roads.–On slippery or flooded roads.–In poor weather conditions.–In the event of restricted visibility for the driver.–Driving on a speed circuit.–Driving on a rolling road.–When using a ‘space-saver’ type spare wheel.–When using snow chains, non-slip covers or studded tyres.Cruise controlFor more information, refer to the General recommendations on the use of driving and manoeuvring aids and the Cruise control - particular recommendations.This system automatically maintains the vehicle’s speed at the value programmed by the driver (speed setting), without the use of the accelerator pedal.Cruise control is switched on manually.It requires a minimum vehicle speed of 25 mph (40km/h).With a manual gearbox, third gear or higher must be engaged.With an automatic gearbox, modeD or second gear or higher in modeM must be engaged.With a drive selector, modeD or B must be engaged.Cruise control remains active after changing gear, regardless of the gearbox type, on engines fitted with the Stop & Start function.Switching off the ignition cancels any speed setting.Steering-mounted control1.ON (CRUISE position)/OFF2.Activate cruise control at the current speed/decrease speed setting3.Activate cruise control at the current speed/increase speed setting4.Pause/resume cruise control with the speed setting previously saved5.Use the speed suggested by the Road signs recognition (MEM display)For more information on the Road signs recognition, refer to the corresponding section.Information displayed on the instrument panel6.Cruise control pause/resume7.Cruise control mode selection8.Speed setting value9.Speed suggested by the Road signs recognition function (depending on version)Switching on/pausing►Turn thumbwheel1 to the "CRUISE" position to select cruise control mode; the function is paused.►Press button2 or3 to activate cruise control and save a speed setting when the vehicle has reached the desired speed; the vehicle’s current speed is saved as the speed setting.►Release the accelerator pedal.►Pressing button 4 temporarily pauses the function.►Pressing button 4 again restores operation of the cruise control (ON).Cruise control can also be paused temporarily:–by pressing the brake pedal.–automatically, if the electronic stability control (ESC) system is triggered.Modifying the cruise speed settingCruise control must be active.To modify the cruise speed setting, based on the current speed of the vehicle:►Briefly press button2 or 3 to change the value in steps of +or -1mph (km/h).►Press and hold button2 or 3 to change the value in steps of +or -5mph (km/h).Pressing and holding button2 or 3results in a rapid change in the speed of the vehicle.As a precaution, we recommend setting a cruise speed fairly close to the current speed of your vehicle, to avoid any sudden acceleration or deceleration of the vehicle.
111Driving6►Release the accelerator pedal.►Pressing button 4 temporarily pauses the function.►Pressing button 4 again restores operation of the cruise control (ON).Cruise control can also be paused temporarily:–by pressing the brake pedal.–automatically, if the electronic stability control (ESC) system is triggered.Modifying the cruise speed settingCruise control must be active.To modify the cruise speed setting, based on the current speed of the vehicle:►Briefly press button2 or 3 to change the value in steps of +or -1mph (km/h).►Press and hold button2 or 3 to change the value in steps of +or -5mph (km/h).Pressing and holding button2 or 3results in a rapid change in the speed of the vehicle.As a precaution, we recommend setting a cruise speed fairly close to the current speed of your vehicle, to avoid any sudden acceleration or deceleration of the vehicle.To modify the cruise speed setting using the speed suggested by the Road signs recognition shown on the instrument panel:►Press button5 once; a message is displayed to confirm the memorisation request.►Press button5 again to save the suggested speed.The speed is immediately shown on the instrument panel as the new speed setting.Switching off►Turn the thumbwheel1 to the "OFF" position: the cruise control information disappears from the screen.MalfunctionIn the event of a malfunction, dashes are displayed flashing and then fixed instead of the speed setting.Have it checked by a PEUGEOT dealer or a qualified workshop.Drive Assist PlusOnly available on versions with the EAT8 automatic gearbox and drive selector.This system automatically adjusts the speed and corrects the trajectory of the vehicle, using Adaptive Cruise Control with Stop&Go in conjunction with Lane Positioning Assist.These two functions must be activated and in operation.For more information on Adaptive cruise control and Lane Positioning Assist, refer to the corresponding sections.The system assists the driver by acting on the steering, acceleration and braking within the physical limitsand capacities of the vehicle. Certain road infrastructure elements or vehicles in the surroundings may not be properly seen or may be poorly interpreted by the camera and radar, resulting in an unexpected change in direction, a lack of steering correction and/or inappropriate management of acceleration or braking.Primarily designed for driving on main roads and motorways, this system only works with moving vehicles driving in the same direction as your vehicle.Adaptive cruise controlFor more information, refer to the General recommendations on the use of driving and manoeuvring aids and the Cruise control - particular recommendations.This system automatically maintains the vehicle speed at a value set by the driver (speed
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131