Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Access Alarm

38Access►Insert a small screwdriver into hole A of the lock to unlock the boot.►Move the latch to the left.Locking after closingIf the fault persists after closing again, the boot will remain locked.In the event of a fault with the central locking system, it is essential to disconnect the battery to lock the boot and so ensure complete locking of the vehicle.Alarm(Depending on version)System which protects and provides a deterrent against theft and break-ins.Exterior perimeter monitoringThe system checks for opening of the vehicle.The alarm is triggered if anyone tries to open a door, the boot or the bonnet, for example.Interior volumetric monitoringThe system checks for any variation in volume in the passenger compartment.The alarm is triggered if anyone breaks a window, enters the passenger compartment or moves inside the vehicle.Self-protection functionThe system checks whether any of its components are out of service.The alarm is triggered if the battery, the central control or the siren wiring is put out of service or damaged.Work on the alarm systemConsult a PEUGEOT dealer or a qualified workshop.Locking the vehicle with full alarm systemActivation►Switch off the ignition and exit the vehicle.►Lock or deadlock the vehicle using the remote control or by pressing on the driver's door handle.When the monitoring system is active, the red indicator lamp in the button flashes once per second and the direction indicators come on for about 2 seconds.The exterior perimeter monitoring is activated after 5 seconds and the interior volumetric monitoring after 45 seconds.The alarm does not activate when locking automatically from a distance.If an opening (door, boot or bonnet) is not properly closed, the vehicle is not locked, but the exterior perimeter monitoring will be activated after 45 seconds, at the same time as the interior volumetric monitoring.Deactivation►Press the remote control unlocking button.or►Unlock the vehicle by pressing the driver’s door handle.The monitoring system is deactivated: the indicator lamp in the button goes off and the sidelamps and/or the daytime running lamps flash for about 2 seconds.After unlocking using the remote controlIf the vehicle automatically locks itself again (as happens if a door or the boot is not opened within 30 seconds of unlocking), the monitoring system is automatically activated.Locking the vehicle with exterior perimeter monitoring onlyDeactivate the interior volumetric monitoring to avoid the unwanted triggering of thealarm,in certain cases such as:–Slightly open window.–Washing the vehicle.–Changing a wheel.–Towing the vehicle.–Transport on a ship or ferry.Deactivating interior volumetric monitoring►Switch off the ignition and within 10seconds press the alarm button until the indicator lamp is on fixed.►Exit the vehicle.►Immediately lock the vehicle using the remote control or the "Keyless Entry and Starting" system.Only exterior perimeter monitoring is activated; the red indicator lamp in the button flashes every second.
39Access2After unlocking using the remote controlIf the vehicle automatically locks itself again (as happens if a door or the boot is not opened within 30 seconds of unlocking), the monitoring system is automatically activated.Locking the vehicle with exterior perimeter monitoring onlyDeactivate the interior volumetric monitoring to avoid the unwanted triggering of thealarm,in certain cases such as:–Slightly open window.–Washing the vehicle.–Changing a wheel.–Towing the vehicle.–Transport on a ship or ferry.Deactivating interior volumetric monitoring►Switch off the ignition and within 10seconds press the alarm button until the indicator lamp is on fixed.►Exit the vehicle.►Immediately lock the vehicle using the remote control or the "Keyless Entry and Starting" system.Only exterior perimeter monitoring is activated; the red indicator lamp in the button flashes every second.To take effect, this deactivation must be performed whenever the ignition is switched off.Reactivating interior volumetric monitoring►Deactivate exterior perimeter monitoring by unlocking the vehicle using the remote control or the "Keyless Entry and Starting" system.The indicator lamp in the button goes off.►Reactivate the full alarm system by locking the vehicle using the remote control or by pressing the driver’s door handle.The red indicator lamp in the button once again flashes every second.Triggering of the alarmThis is indicated by sounding of the siren and flashing of the direction indicators for 30 seconds.Depending on the country of sale, certain monitoring functions remain active until the alarm has been triggered eleven times consecutively.When the vehicle is unlocked using the remote control or the Keyless Entry and Starting system, rapid flashing of the red indicator lamp in the button informs you that the alarm was triggered during your absence. When the ignition is switched on, this flashing stops.Failure of the remote controlTo deactivate the monitoring functions:►Unlock the vehicle using the key in the driver's door lock.►Open the door; the alarm is triggered.►Switch on the ignition; this stops the alarm. The indicator lamp in the button goes off.Locking the vehicle without activating the alarm►Lock or deadlock the vehicle using the key (built-in the remote control) in the driver's door lock.MalfunctionWhen the ignition is switched on, the fixed lighting of the red indicator lamp in the button indicates a system malfunction.Have it checked by a PEUGEOT dealer or a qualified workshop.Automatic activation(Depending on version)The system is activated automatically 2 minutes after the last door or the boot is closed.►To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control or unlock the vehicle using the "Keyless Entry and Starting" system.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131