Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 208 2020-2025 Access

30AccessRemote control / KeyRemote control functionDepending on version, the remote control can be used to perform the following remote functions:–Unlocking/Locking/Deadlocking the vehicle.–Remote operation of lighting.–Folding/Unfolding the door mirrors.–Activating/Deactivating the alarm.–Locating the vehicle.–Closing the windows.–Activating the vehicle’s electronic immobiliser.Back-up procedures allow the vehicle to be locked/unlocked in the event of a failure of the remote control, the central locking, the battery, etc. For more information on the Back-up procedures, refer to the corresponding section.Built-in keyThe key built into the remote control can be used for the following operations, depending on version:–Unlocking/Locking/Deadlocking the vehicle.–Activation/Deactivation of the manual child lock.–Activation/Deactivation of the front passenger airbag.–Back-up Unlocking/Locking of the doors.–Switching on the ignition and starting/switching off the engine.Without Keyless Entry and Starting►To unfold or fold the key, press the button.With Keyless Entry and Starting►To eject the key or put it back in place, pull and hold the button.Once the built-in key is ejected, always keep it with you to be able to carry out the corresponding back-up procedures.Unlocking the vehicleSelective unlocking is configured in the Driving/Vehicle touch screen menu.Complete unlocking►Press the unlocking button.Selective unlockingDriver’s door and fuel filler/charging flap►Press the unlocking button.►Press it again to unlock the other doors and the boot.The charging nozzle can be unplugged on the second press.Complete or selective unlocking and alarm deactivation is confirmed by the flashing of the sidelamps and/or daytime running lamps.Depending on version, the door mirrors unfold.Locking the vehicleNormal locking►Press the locking button.The locking, and the activation of the alarm depending on version, is confirmed by the lighting of the direction indicators.Depending on version, the door mirrors fold.An access (door or boot) that is not properly closed prevents locking of the vehicle. However, if the vehicle is fitted with an alarm, it will be activated after 45seconds.If the vehicle is unlocked but the doors or boot are not subsequently opened,the vehicle will automatically lock itself again after about 30seconds. If the vehicle is fitted with an alarm, it will be reactivated automatically.
31Access2Complete or selective unlocking and alarm deactivation is confirmed by the flashing of the sidelamps and/or daytime running lamps.Depending on version, the door mirrors unfold.Locking the vehicleNormal locking►Press the locking button.The locking, and the activation of the alarm depending on version, is confirmed by the lighting of the direction indicators.Depending on version, the door mirrors fold.An access (door or boot) that is not properly closed prevents locking of the vehicle. However, if the vehicle is fitted with an alarm, it will be activated after 45seconds.If the vehicle is unlocked but the doors or boot are not subsequently opened,the vehicle will automatically lock itself again after about 30seconds. If the vehicle is fitted with an alarm, it will be reactivated automatically.DeadlockingDeadlocking renders the interior door controls inoperative. It also disables the central locking button.The horn remains operational.Never leave anyone inside the vehicle when it is deadlocked.►Press the locking button again within 3 seconds to deadlock the vehicle (confirmed by the temporary lighting of the direction indicators).Closing the windowsHolding the locking button pressed for more than 3seconds closes the windows.When closing windows, ensure that no person or object could prevent their correct closure.To leave the windows partly open on versions with alarm, you must first deactivate the interior volumetric monitoring.For more information on the Alarm, refer to the corresponding section.Locating the vehicleHelps you to locate your vehicle from a distance, with the vehicle locked:–The direction indicators or sidelamps and/or daytime running lamps, depending on version, flash for approximately 10 seconds.–The door mirror spotlamps come on.–The courtesy lamps come on.►Press this button.Remote lighting of the lampsAvailability of this function depends on version.►Press this button. The sidelamps, dipped beam headlamps, number plate lamps and door mirror spotlamps come on for 30 seconds.Pressing again before the end of the timed period switches off the lamps immediately.AdviceRemote controlThe remote control is a sensitive, high-frequency device; avoid handling it in your pocket, due to the risk of unintentionally unlocking the vehicle.Avoid pressing the remote control buttons while out of range of the vehicle, due to the risk of rendering the remote control inoperative. It would then be necessary to reset it.The remote control does not workwhen the key is in the ignition switch, even when the ignition is switched off.
32AccessAnti-theft protectionDo not modify the electronic vehicle immobiliser, as this might result in malfunctions.For vehicles with a key ignition switch, remember to remove the key and turn the steering wheel to engage the steering lock.Locking the vehicleDriving with the doors locked could make it more difficult for the emergency services to enter the passenger compartment in an emergency.As a safety precaution, remove the key from the ignition or take the electronic key with you when leaving the vehicle, even for a short time.Purchasing a second-hand vehicleHave the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones able to start the vehicle.Proximity Keyless Entry and StartThis is a Keyless Entry and Starting system.It enables automatic vehicle locking/unlocking simply by detecting the electronic key.As long as the driver has the electronic key on their person, the vehicle unlocks as they approach and locks when they walk away.If the electronic key is present in an area between 2 and 7 m from the vehicle for more than 30 minutes, the system is deactivated to preserve the battery.Key recognition zones:Zone A: automatic locking on moving away from the vehicle (about 2metres from the vehicle).Zone B: automatic unlocking and welcome lighting on approaching the vehicle (between 1 and 2metres from the vehicle).For more information on Welcome lighting, please refer to the corresponding section.The automatic functions are configured via the Driving/Vehicle touch screen menu.Unlocking the vehicleSelective unlocking (driver’s door, boot) is configured in the Driving/Vehicle touch screen menu.Selective unlocking is deactivated by default.Complete unlockingThe vehicle (doors and boot) unlocks:►Either automatically as the driver approaches in zone B, if the automatic functions are activated.►Or by gently pressing the driver's door handle or the button on the boot.Unlocking, and alarm deactivation (depending on version), is confirmed by the flashing of the sidelamps and/or daytime running lamps.Depending on version, the door mirrors unfold.If the electronic key remains around the vehicle (zones A or B) for more than 15 minutes without action, the automatic functions are deactivated. To unlock or lock the vehicle, use the remote control or press one of the door handles.If using the door handle does not lock/unlock the vehicle, bring the electronic key closer and repeat the desired action.Selective unlockingDriver’s door and fuel filler/charging flapThey unlock:►Either automatically when approaching the driver’s door, if the automatic functions are activated.►Or by gently pressing the driver's door handle.►Once inside the vehicle, to unlock all accesses, press the central locking button or pull the opening control on any door.Selective unlocking of the bootThe boot unlocks automatically as you approach the rear of the vehicle.►Press the tailgate control to open the boot.The doors remain locked.Locking the vehicleNormal locking
33Access2the vehicle, use the remote control or press one of the door handles.If using the door handle does not lock/unlock the vehicle, bring the electronic key closer and repeat the desired action.Selective unlockingDriver’s door and fuel filler/charging flapThey unlock:►Either automatically when approaching the driver’s door, if the automatic functions are activated.►Or by gently pressing the driver's door handle.►Once inside the vehicle, to unlock all accesses, press the central locking button or pull the opening control on any door.Selective unlocking of the bootThe boot unlocks automatically as you approach the rear of the vehicle.►Press the tailgate control to open the boot.The doors remain locked.Locking the vehicleNormal lockingWith the doors and boot closed, the vehicle locks:►Either automatically, upon leaving zone A, if the automatic functions are activated.►Or by gently pressing the driver's door handle.Locking is confirmed by the lighting of the direction indicators, and by an audible signal when the vehicle is locked upon walking away.It is not possible to lock the vehicle if the electronic key is left inside the vehicle.For safety and theft protection reasons, never leave the electronic key in the vehicle, even when you are close to it.DeadlockingDeadlocking renders the interior door controls inoperative. It also deactivates the central locking button.The horn remains operational.Never leave anyone inside the vehicle when it is deadlocked.►Gently press the driver's door handle to lock the vehicle.►Press it again within 3seconds to deadlock the vehicle (confirmed by the temporary lighting of the direction indicators).If one of the doors or the boot is still open or if the electronic key for the Keyless Entry and Startingsystem has been left inside the vehicle, central locking will not take place.If the vehicle is unlocked but the doors or boot are not subsequently opened,the vehicle will automatically lock itself again after about 30seconds. If the vehicle is fitted with an alarm, it will be reactivated automatically.The automatic door mirror folding/unfolding function is configured via the touch screen’s Driving/Vehicle menu.As a safety measure, never leave the vehicle, even for a short time, without taking the Keyless Entry and Starting system’s electronic key with you.Be aware of the risk of theft of the vehicle if the key is present in one of the defined areas while the vehicle is unlocked.In order to preserve the battery in the electronic key and the vehicle's battery:–The unlock on approach function (zoneB) automatically switches to standby mode
34Accessafter several days (approximately one week) without being used. To unlock the vehicle, use the remote control or press on one of the front door handles. The next time the vehicle is started, the automatic unlocking and locking functions will be reactivated.–If the welcome lighting is triggered several times in succession without the vehicle subsequently being started, it will be deactivated.–All "hands-free" functions switch to extended standby mode after 21 days of non-use. To restore these functions, unlock the vehicle using the remote control and start the engine.Electrical interferenceThe electronic key may not operate if close to certain electronic devices such as telephones (switched on or on standby) or laptop computers, strong magnetic fields, etc.Central lockingManual►Press this button to lock/unlock the vehicle (doors and boot) from inside the passenger compartment. The indicator lamp comes on to confirm the central locking of the vehicle.Central locking does not take place if any of the doors are open.When locking/deadlocking from the outsideWhen the vehicle is locked or deadlocked from the outside, the indicator lamp flashes and the button is deactivated.►After normal locking, pull one of the interior door controls to unlock the vehicle.►After deadlocking, you must use the remote control, the "Keyless Entry and Starting" system or the built-in key to unlock the vehicle.Automatic (anti-intrusion security)The doors and boot lock automatically while driving (speed above 6 mph (10km/h)).To deactivate/reactivate this function (activated by default):►Press the button until a confirmation message appears.Transporting long or voluminous objectsPress the central locking control to drive with the boot open and the doors locked. Otherwise, every time the speed of the vehicle exceeds 6 mph (10 km/h), the sound of the locks rebounding will be heard and an alert will be displayed.Back-up proceduresLost keys, remote control, electronic keyGo to a PEUGEOT dealer with the vehicle's registration certificate, your personal identification documents and if possible, the label bearing the key code.The PEUGEOT dealer will be able to retrieve the key code and the transponder code, enabling a new key to be ordered.Complete unlocking/locking of the vehicle with the keyUse this procedure in the following situations:–Remote control battery discharged.–Remote control malfunction.–Vehicle battery discharged.–Vehicle in an area subject to strong electromagnetic interference.In the first case, change the remote control battery.In the second case, reinitialisethe remote control.Refer to the corresponding sections.►Insert the key in the door lock.►Turn the key towards the front/rear to unlock/lock the vehicle.►Turn the key towards the rear again within 3seconds to deadlock the vehicle.If the vehicle is fitted with an alarm, it will not be activated when locking with the key.If the alarm is activated, the siren sounds when the door is opened; switch on the ignition to stop it.
35Access2Complete unlocking/locking of the vehicle with the keyUse this procedure in the following situations:–Remote control battery discharged.–Remote control malfunction.–Vehicle battery discharged.–Vehicle in an area subject to strong electromagnetic interference.In the first case, change the remote control battery.In the second case, reinitialisethe remote control.Refer to the corresponding sections.►Insert the key in the door lock.►Turn the key towards the front/rear to unlock/lock the vehicle.►Turn the key towards the rear again within 3seconds to deadlock the vehicle.If the vehicle is fitted with an alarm, it will not be activated when locking with the key.If the alarm is activated, the siren sounds when the door is opened; switch on the ignition to stop it.Central locking not functioningUse these procedures in the following cases:–Central locking malfunction.–Battery disconnected or discharged.In the event of a malfunction of the central locking system, the battery must be disconnected to ensure that the vehicle is locked fully.Driver's or front left-hand door (depending on version)►Insert the key into the door lock.►Turn the key towards the rear of the vehicle to lock it, or towards the front to unlock it.Passenger doorsUnlocking►Pull the interior door opening control.Locking►Open the doors.►For the rear doors, check that the child lock is not on.Refer to the corresponding section.►Remove the black cap, located on the edge of the door, using the key.►Insert the key into the socket without forcing it, then turn the latch towards the inside of the door.►Remove the key and refit the black cap.►Close the doors and check from the outside that the vehicle is locked.Changing the batteryIf the battery is flat, this warning lamp comes on, accompanied by an audible signal and the display of a message.
36AccessBattery type: CR2032/3 volts.Without Keyless Entry and StartingWith Keyless Entry and Starting►Unclip the cover by inserting a small screwdriver in the slot and lift the cover.►Remove the flat battery from its housing.►Put the new battery in place, respecting the polarity. Start by inserting it into the contacts located in the corner, then clip the cover onto the unit.►Reinitialise the remote control.For more information on Reinitialising the remote control, refer to the corresponding section.Do not throw remote control batteries away, as they contain metals that are harmful to the environment. Take them to an approved disposal point.Do not ingest battery.Chemical Burn Hazard This product contains a coin / button cell battery.If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Risk of explosion if the battery is replaced by an incorrect type. Replace battery with the same type.Risk of explosion or the leakage of flammable liquid or gas. Do not use in /store in /bring into environment of extremely high temperature or extremely low pressure due to the very high altitude. Do not attempt to burn, crush, or cut used battery. Reinitialising the remote controlFollowing replacement of the battery or in the event of a fault, it may be necessary to reinitialise the remote control.Without Keyless Entry and Starting►Switch the ignition off.►Turn the key to position 2 (Ignition on).►Immediately press the closed padlock button for a few seconds.►Switch off the ignition and remove the key from the ignition switch.The remote control is now fully operational again.With Keyless Entry and Starting►Insert the mechanical key (incorporated into the remote control) into the lock to open the vehicle.►Place the electronic key against the back-up reader on the steering column and hold it there until the ignition is switched on.►With a manual gearbox, place the gear lever in neutral then fully depress the clutch pedal.►With an automatic gearbox or drive selector, while in modeP, depress the brake pedal.►Switch on the ignition by pressing the "START/STOP" button.
37Access2►Switch off the ignition and remove the key from the ignition switch.The remote control is now fully operational again.With Keyless Entry and Starting►Insert the mechanical key (incorporated into the remote control) into the lock to open the vehicle.►Place the electronic key against the back-up reader on the steering column and hold it there until the ignition is switched on.►With a manual gearbox, place the gear lever in neutral then fully depress the clutch pedal.►With an automatic gearbox or drive selector, while in modeP, depress the brake pedal.►Switch on the ignition by pressing the "START/STOP" button.If the fault persists after reinitialisation, contact a PEUGEOT dealer or a qualified workshop without delay.DoorsOpeningFrom outside►After unlocking the vehicle or with the "Keyless Entry and Starting" system electronic key in the recognition zone, pull the door handle.From inside►Pull the interior opening control of a door; this unlocks the vehicle completely.With selective unlocking activated:–Opening the driver's door unlocks the driver's door only (if the vehicle has not already been completely unlocked).–Opening one of the passenger doors unlocks the rest of the vehicle.ClosingIf a door is not properly closed, this warning lamp comes on accompanied by a message if the engine is running, and an audible signal when the vehicle is travelling at more than 6mph (10km/h).BootOpening►After unlocking the vehicle or just the boot (depending on version), press the opening control and then lift the tailgate.Closing►Lower the tailgate using one of the interior grab handles.In the event of a malfunction or if you experience difficulty opening or closing the tailgate, have it checked by a PEUGEOT dealer or a qualified workshop without delay, to avoid the issue deteriorating and prevent any risk of the tailgate dropping, potentially causing serious injury.Back-up releaseTo manually unlock the boot in the event of a battery or central locking failure.Unlocking►Fold the rear seats to gain access to the lock from inside the boot.
38Access►Insert a small screwdriver into hole A of the lock to unlock the boot.►Move the latch to the left.Locking after closingIf the fault persists after closing again, the boot will remain locked.In the event of a fault with the central locking system, it is essential to disconnect the battery to lock the boot and so ensure complete locking of the vehicle.Alarm(Depending on version)System which protects and provides a deterrent against theft and break-ins.Exterior perimeter monitoringThe system checks for opening of the vehicle.The alarm is triggered if anyone tries to open a door, the boot or the bonnet, for example.Interior volumetric monitoringThe system checks for any variation in volume in the passenger compartment.The alarm is triggered if anyone breaks a window, enters the passenger compartment or moves inside the vehicle.Self-protection functionThe system checks whether any of its components are out of service.The alarm is triggered if the battery, the central control or the siren wiring is put out of service or damaged.Work on the alarm systemConsult a PEUGEOT dealer or a qualified workshop.Locking the vehicle with full alarm systemActivation►Switch off the ignition and exit the vehicle.►Lock or deadlock the vehicle using the remote control or by pressing on the driver's door handle.When the monitoring system is active, the red indicator lamp in the button flashes once per second and the direction indicators come on for about 2 seconds.The exterior perimeter monitoring is activated after 5 seconds and the interior volumetric monitoring after 45 seconds.The alarm does not activate when locking automatically from a distance.If an opening (door, boot or bonnet) is not properly closed, the vehicle is not locked, but the exterior perimeter monitoring will be activated after 45 seconds, at the same time as the interior volumetric monitoring.Deactivation►Press the remote control unlocking button.or►Unlock the vehicle by pressing the driver’s door handle.The monitoring system is deactivated: the indicator lamp in the button goes off and the sidelamps and/or the daytime running lamps flash for about 2 seconds.After unlocking using the remote controlIf the vehicle automatically locks itself again (as happens if a door or the boot is not opened within 30 seconds of unlocking), the monitoring system is automatically activated.Locking the vehicle with exterior perimeter monitoring onlyDeactivate the interior volumetric monitoring to avoid the unwanted triggering of thealarm,in certain cases such as:–Slightly open window.–Washing the vehicle.–Changing a wheel.–Towing the vehicle.–Transport on a ship or ferry.Deactivating interior volumetric monitoring►Switch off the ignition and within 10seconds press the alarm button until the indicator lamp is on fixed.►Exit the vehicle.►Immediately lock the vehicle using the remote control or the "Keyless Entry and Starting" system.Only exterior perimeter monitoring is activated; the red indicator lamp in the button flashes every second.
39Access2After unlocking using the remote controlIf the vehicle automatically locks itself again (as happens if a door or the boot is not opened within 30 seconds of unlocking), the monitoring system is automatically activated.Locking the vehicle with exterior perimeter monitoring onlyDeactivate the interior volumetric monitoring to avoid the unwanted triggering of thealarm,in certain cases such as:–Slightly open window.–Washing the vehicle.–Changing a wheel.–Towing the vehicle.–Transport on a ship or ferry.Deactivating interior volumetric monitoring►Switch off the ignition and within 10seconds press the alarm button until the indicator lamp is on fixed.►Exit the vehicle.►Immediately lock the vehicle using the remote control or the "Keyless Entry and Starting" system.Only exterior perimeter monitoring is activated; the red indicator lamp in the button flashes every second.To take effect, this deactivation must be performed whenever the ignition is switched off.Reactivating interior volumetric monitoring►Deactivate exterior perimeter monitoring by unlocking the vehicle using the remote control or the "Keyless Entry and Starting" system.The indicator lamp in the button goes off.►Reactivate the full alarm system by locking the vehicle using the remote control or by pressing the driver’s door handle.The red indicator lamp in the button once again flashes every second.Triggering of the alarmThis is indicated by sounding of the siren and flashing of the direction indicators for 30 seconds.Depending on the country of sale, certain monitoring functions remain active until the alarm has been triggered eleven times consecutively.When the vehicle is unlocked using the remote control or the Keyless Entry and Starting system, rapid flashing of the red indicator lamp in the button informs you that the alarm was triggered during your absence. When the ignition is switched on, this flashing stops.Failure of the remote controlTo deactivate the monitoring functions:►Unlock the vehicle using the key in the driver's door lock.►Open the door; the alarm is triggered.►Switch on the ignition; this stops the alarm. The indicator lamp in the button goes off.Locking the vehicle without activating the alarm►Lock or deadlock the vehicle using the key (built-in the remote control) in the driver's door lock.MalfunctionWhen the ignition is switched on, the fixed lighting of the red indicator lamp in the button indicates a system malfunction.Have it checked by a PEUGEOT dealer or a qualified workshop.Automatic activation(Depending on version)The system is activated automatically 2 minutes after the last door or the boot is closed.►To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control or unlock the vehicle using the "Keyless Entry and Starting" system.
40AccessElectric windows1.Left-hand front2.Right-hand front3.Right-hand rear (depending on version)4.Left-hand rear (depending on version)5.Electric child lock (depending on version)For more information on the Electric child lock, refer to the corresponding section.Manual operation►To open/close the window, press/pull the switch without passing the point of resistance; the window stops as soon as the switch is released.Automatic operation(Depending on version)►To open/close the window, press/pull the switch past its resistance point: the window opens/closes completely when the switch is released.Operating the switch again stops the movement of the window.Window controls remain operational for approximately 45 seconds after switching off the ignition or after locking the vehicle.After that time, the controls are disabled. To reactivate them, switch on the ignition or unlock the vehicle.Anti-pinch(Depending on version)If the window meets an obstacle while rising, it stops and immediately partially lowers again.Reinitialising the electric windowsAfter reconnecting the battery, or in the event of abnormal window movement, the anti-pinch function must be reinitialised.The anti-pinch function is disabled during the following sequence of operations.For each window:►Lower the window fully, then raise it; it will rise in steps of a few centimetres each time the control is pressed. Repeat the operation until the window is fully closed.►Continue to pull the control for at least one second after the window reaches the closed position.If an electric window meets an obstacle during operation, the movement of the window must be reversed. To do this, press the relevant control.When the driver operates the passengers’ electric window controls, it is important to ensure that nothing can prevent the window from closing properly.It is important to ensure that passengers use the electric windows correctly.Pay particular attention to children when operating the windows.Be aware of passengers and/or other persons present when closing windows remotely using the electronic key.Do not put your head or arms through the open windows when the vehicle is moving - risk of serious injury!
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131